add support for Wacom Cintiq 15x PL-550

Lvaskz commented 6 years ago

Hello, I attached file to give support to the mentioned tablet. Ubuntu 18.04 does not recognize the tablet and I can not calibrate or draw anything. In linuxmint 18.3 works perfectly. sysinfo.3XqU88nvax.tar.gz

Lvaskz commented 6 years ago

Hi, with linuxmint 19 beta, wacom Cintiq 15x Pl 550 is no recognized

jigpu commented 6 years ago

Hi there -- could you let me know if your Cintiq is connected over USB or serial? The only mention of it in your logs is as a monitor, not as an input device. It isn't listed as a USB device by lsusb, the kernel's dmesg log doesn't show any interesting devices, and the xsetwacom and xinput tools don't list it either.

If you're connected over serial, I would strongly suggest using USB instead. The serial connection is much harder to get set up properly, which could be why it suddenly stopped working (a minor config file difference between Ubuntu and Mint could easily be the problem).

If you're connected over USB, more in-depth troubleshooting is required. Does the tablet's green status LED light when touching the pen to the screen?

Lvaskz commented 6 years ago

Wacom cintiq 15x is connected via usb.

"Does the tablet's green status LED light when touching the pen to the screen?" Yes, it does

jigpu commented 6 years ago

Hmm, okay. In that case, something very strange is going on. The tablet is clearly working enough to light the status LED, but the syslog didn't indicate the kernel ever saw a USB device. Please try running dmesg -w to "watch" the kernel logs in real-time. Take note of the timestamp of the last message, and then unplug and reconnect the Cintiq's USB cable. Were any new messages logged? Please copy any new messages here.

Lvaskz commented 6 years ago

I have something to say. My cintiq has a cable to conect to my computer via hdmi adapter and a usb cable to the computer for the pen. I add a manual pdf, watch page 11 to see the tablet if that helps Cintiq15X-User-Manual.pdf

Lvaskz commented 6 years ago

[ 0.000000] microcode: microcode updated early to revision 0x23, date = 2018-01-18 [ 0.000000] Linux version 4.15.0-23-generic (buildd@lgw01-amd64-055) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #25-Ubuntu SMP Wed May 23 18:02:16 UTC 2018 (Ubuntu 4.15.0-23.25-generic 4.15.18) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-23-generic root=UUID=9ec20f28-0305-4600-8ed3-22c7465ef553 ro quiet splash vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'

[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cadc4fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cadc5000-0x00000000cadcbfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cadcc000-0x00000000cb1f4fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cb1f5000-0x00000000cb7f0fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cb7f1000-0x00000000da891fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da892000-0x00000000dabdafff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dabdb000-0x00000000dabf5fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dabf6000-0x00000000db571fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000db572000-0x00000000dbf6ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dbf70000-0x00000000dbffdfff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000dbffe000-0x00000000dbffefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by American Megatrends [ 0.000000] efi: ACPI=0xdabe0000 ACPI 2.0=0xdabe0000 SMBIOS=0xf04c0 MPS=0xfd820 [ 0.000000] secureboot: Secure boot could not be determined (mode 0) [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Dell Inc. Inspiron 3442/0RW1RW, BIOS A05 11/14/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7F00000000 write-back [ 0.000000] 1 base 0100000000 mask 7FE0000000 write-back [ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable [ 0.000000] 3 base 00DE000000 mask 7FFE000000 uncachable [ 0.000000] 4 base 00DD000000 mask 7FFF000000 uncachable [ 0.000000] 5 base 011FE00000 mask 7FFFE00000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] total RAM covered: 4046M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 7 lose cover RAM: 0G [ 0.000000] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdbfff max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fdad0-0x000fdadf] mapped at [ (ptrval)] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x5cb3f000, 0x5cb3ffff] PGTABLE [ 0.000000] BRK [0x5cb40000, 0x5cb40fff] PGTABLE [ 0.000000] BRK [0x5cb41000, 0x5cb41fff] PGTABLE [ 0.000000] BRK [0x5cb42000, 0x5cb42fff] PGTABLE [ 0.000000] BRK [0x5cb43000, 0x5cb43fff] PGTABLE [ 0.000000] BRK [0x5cb44000, 0x5cb44fff] PGTABLE [ 0.000000] BRK [0x5cb45000, 0x5cb45fff] PGTABLE [ 0.000000] BRK [0x5cb46000, 0x5cb46fff] PGTABLE [ 0.000000] BRK [0x5cb47000, 0x5cb47fff] PGTABLE [ 0.000000] BRK [0x5cb48000, 0x5cb48fff] PGTABLE [ 0.000000] BRK [0x5cb49000, 0x5cb49fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x31537000-0x34a92fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000DABE0000 000024 (v02 DELL ) [ 0.000000] ACPI: XSDT 0x00000000DABE0098 0000B4 (v01 DELL WN09 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000DABF07C8 00010C (v05 DELL WN09 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000DABE01E0 0105E4 (v02 DELL WN09 00000000 INTL 20120711) [ 0.000000] ACPI: FACS 0x00000000DB56EF80 000040 [ 0.000000] ACPI: APIC 0x00000000DABF08D8 000072 (v03 DELL WN09 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000DABF0950 000044 (v01 DELL WN09 01072009 AMI 00010013) [ 0.000000] ACPI: ASF! 0x00000000DABF0998 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: LPIT 0x00000000DABF0A40 000094 (v01 ALASKA 00000000 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000DABF0AD8 000228 (v01 INTEL sensrhub 00000000 INTL 20120711) [ 0.000000] ACPI: SLIC 0x00000000DABF0D00 000176 (v01 DELL WN09 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x00000000DABF0E78 0004B5 (v01 PmRef Cpu0Ist 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000DABF1330 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711) [ 0.000000] ACPI: MCFG 0x00000000DABF1E08 00003C (v01 DELL WN09 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000DABF1E48 000038 (v01 DELL WN09 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000DABF1E80 000315 (v01 SataRe SataTabl 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000DABF2198 0035A5 (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.000000] ACPI: MSDM 0x00000000DABF5740 000055 (v03 DELL WN09 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x00000000DABF5798 00004B (v01 MeSsdt MeSsdt 00003000 INTL 20120711) [ 0.000000] ACPI: TPM2 0x00000000DABF57E8 000034 (v03 00000000 00000000) [ 0.000000] ACPI: BGRT 0x00000000DABF5820 000038 (v00 DELL WN09 01072009 AMI 00010013) [ 0.000000] ACPI: CSRT 0x00000000DABF5858 0000C4 (v01 INTL HSWULT-R 00000001 INTL 20100528) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x11fdd5000-0x11fdfffff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000011fdfffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cadc4fff] [ 0.000000] node 0: [mem 0x00000000cadcc000-0x00000000cb1f4fff] [ 0.000000] node 0: [mem 0x00000000cb7f1000-0x00000000da891fff] [ 0.000000] node 0: [mem 0x00000000dbffe000-0x00000000dbffefff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000011fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fdfffff] [ 0.000000] On node 0 totalpages: 1024045 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 26 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13899 pages used for memmap [ 0.000000] DMA32 zone: 889488 pages, LIFO batch:31 [ 0.000000] Normal zone: 2040 pages used for memmap [ 0.000000] Normal zone: 130560 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 98 pages [ 0.000000] Reserving Intel graphics memory at 0x00000000dd200000-0x00000000df1fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcadc5000-0xcadcbfff] [ 0.000000] PM: Registered nosave memory: [mem 0xcb1f5000-0xcb7f0fff] [ 0.000000] PM: Registered nosave memory: [mem 0xda892000-0xdabdafff] [ 0.000000] PM: Registered nosave memory: [mem 0xdabdb000-0xdabf5fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdabf6000-0xdb571fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb572000-0xdbf6ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdbf70000-0xdbffdfff] [ 0.000000] PM: Registered nosave memory: [mem 0xdbfff000-0xdcffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf1fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1008016 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-23-generic root=UUID=9ec20f28-0305-4600-8ed3-22c7465ef553 ro quiet splash vt.handoff=1 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3688712K/4096180K available (12300K kernel code, 2470K rwdata, 4240K rodata, 2408K init, 2416K bss, 407468K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 39083 entries in 153 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 524544, nr_irqs: 728, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#1 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 7 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 1696.068 MHz processor [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3392.13 BogoMIPS (lpj=6784272) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.024000] Security Framework initialized [ 0.024000] Yama: becoming mindful. [ 0.024000] AppArmor: AppArmor initialized [ 0.024000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.024000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.024000] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.024000] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.024000] CPU: Physical Processor ID: 0 [ 0.024000] CPU: Processor Core ID: 0 [ 0.024000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.024000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.024000] mce: CPU supports 7 MCE banks [ 0.024000] CPU0: Thermal monitoring enabled (TM1) [ 0.024000] process: using mwait in idle threads [ 0.024000] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.024000] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.024000] Spectre V2 : Mitigation: Full generic retpoline [ 0.024000] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier [ 0.024000] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.024000] Speculative Store Bypass: Vulnerable [ 0.024000] Freeing SMP alternatives memory: 36K [ 0.036779] TSC deadline timer enabled [ 0.036782] smpboot: CPU0: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz (family: 0x6, model: 0x45, stepping: 0x1) [ 0.036849] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.036889] ... version: 3 [ 0.036890] ... bit width: 48 [ 0.036890] ... generic registers: 4 [ 0.036891] ... value mask: 0000ffffffffffff [ 0.036892] ... max period: 00007fffffffffff [ 0.036892] ... fixed-purpose events: 3 [ 0.036893] ... event mask: 000000070000000f [ 0.036928] Hierarchical SRCU implementation. [ 0.037904] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.037918] smp: Bringing up secondary CPUs ... [ 0.037990] x86: Booting SMP configuration: [ 0.037991] .... node #0, CPUs: #1 #2 #3 [ 0.039728] smp: Brought up 1 node, 4 CPUs [ 0.039728] smpboot: Max logical packages: 1 [ 0.039728] smpboot: Total of 4 processors activated (13568.54 BogoMIPS) [ 0.040219] devtmpfs: initialized [ 0.040219] x86/mm: Memory block size: 128MB [ 0.040401] evm: security.selinux [ 0.040401] evm: security.SMACK64 [ 0.040402] evm: security.SMACK64EXEC [ 0.040402] evm: security.SMACK64TRANSMUTE [ 0.040403] evm: security.SMACK64MMAP [ 0.040403] evm: security.apparmor [ 0.040404] evm: security.ima [ 0.040404] evm: security.capability [ 0.040418] PM: Registering ACPI NVS region [mem 0xcadc5000-0xcadcbfff] (28672 bytes) [ 0.040418] PM: Registering ACPI NVS region [mem 0xdabf6000-0xdb571fff] (9945088 bytes) [ 0.040418] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.040418] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.040418] pinctrl core: initialized pinctrl subsystem [ 0.040418] RTC time: 0:36:56, date: 06/29/18 [ 0.040418] NET: Registered protocol family 16 [ 0.040418] audit: initializing netlink subsys (disabled) [ 0.040418] audit: type=2000 audit(1530232616.040:1): state=initialized audit_enabled=0 res=1 [ 0.040418] cpuidle: using governor ladder [ 0.040418] cpuidle: using governor menu [ 0.040418] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.040418] ACPI: bus type PCI registered [ 0.040418] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.040418] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.040418] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.040418] PCI: Using configuration type 1 for base access [ 0.040418] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.041087] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.041087] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.041087] ACPI: Added _OSI(Module Device) [ 0.041087] ACPI: Added _OSI(Processor Device) [ 0.041087] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.041087] ACPI: Added _OSI(Processor Aggregator Device) [ 0.041087] ACPI: Executed 1 blocks of module-level executable AML code [ 0.051879] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.084686] ACPI: Dynamic OEM Table Load: [ 0.084692] ACPI: SSDT 0xFFFF8E30DA72F400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.084882] ACPI: Dynamic OEM Table Load: [ 0.084882] ACPI: SSDT 0xFFFF8E30DA606000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.085141] ACPI: Dynamic OEM Table Load: [ 0.085141] ACPI: SSDT 0xFFFF8E30DA6E9A00 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.085141] ACPI: Interpreter enabled [ 0.085141] ACPI: (supports S0 S3 S4 S5) [ 0.085141] ACPI: Using IOAPIC for interrupt routing [ 0.085141] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.085479] ACPI: Enabled 6 GPEs in block 00 to 7F [ 0.109084] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.109089] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.109416] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 0.109626] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 0.109627] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.110263] PCI host bridge to bus 0000:00 [ 0.110266] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.110268] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.110269] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.110270] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.110272] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.110273] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.110274] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.110275] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window] [ 0.110277] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.110285] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000 [ 0.110400] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000 [ 0.110411] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] [ 0.110417] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.110421] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.110434] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.110526] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300 [ 0.110535] pci 0000:00:03.0: reg 0x10: [mem 0xf7e14000-0xf7e17fff 64bit] [ 0.110655] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330 [ 0.110674] pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit] [ 0.110727] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.110817] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000 [ 0.110836] pci 0000:00:16.0: reg 0x10: [mem 0xf7e1d000-0xf7e1d01f 64bit] [ 0.110892] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.110986] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300 [ 0.111001] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e10000-0xf7e13fff 64bit] [ 0.111055] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.111147] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400 [ 0.111212] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.111363] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400 [ 0.111430] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.111577] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400 [ 0.111644] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.111795] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320 [ 0.111815] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e1b000-0xf7e1b3ff] [ 0.111895] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.111989] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100 [ 0.116186] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601 [ 0.116200] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7] [ 0.116206] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3] [ 0.116213] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097] [ 0.116219] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083] [ 0.116225] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.116231] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e1a000-0xf7e1a7ff] [ 0.116263] pci 0000:00:1f.2: PME# supported from D3hot [ 0.116346] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500 [ 0.116361] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e19000-0xf7e190ff 64bit] [ 0.116379] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.116537] acpiphp: Slot [1] registered [ 0.116542] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.116615] pci 0000:06:00.0: [168c:0036] type 00 class 0x028000 [ 0.116645] pci 0000:06:00.0: reg 0x10: [mem 0xf7d00000-0xf7d7ffff 64bit] [ 0.116680] pci 0000:06:00.0: reg 0x30: [mem 0xf7d80000-0xf7d8ffff pref] [ 0.116750] pci 0000:06:00.0: supports D1 D2 [ 0.116751] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.128037] pci 0000:00:1c.2: PCI bridge to [bus 06] [ 0.128042] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.128135] pci 0000:07:00.0: [10ec:8136] type 00 class 0x020000 [ 0.128167] pci 0000:07:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 0.128197] pci 0000:07:00.0: reg 0x18: [mem 0xf7c00000-0xf7c00fff 64bit] [ 0.128216] pci 0000:07:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref] [ 0.128322] pci 0000:07:00.0: supports D1 D2 [ 0.128324] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.140025] pci 0000:00:1c.3: PCI bridge to [bus 07] [ 0.140029] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 0.140033] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.140038] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.141967] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) [ 0.142035] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.142102] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) [ 0.142170] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) [ 0.142239] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.142306] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.142374] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) [ 0.142442] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) [ 0.146230] SCSI subsystem initialized [ 0.146241] libata version 3.00 loaded. [ 0.146241] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.146241] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.146241] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.146241] vgaarb: loaded [ 0.146241] ACPI: bus type USB registered [ 0.146241] usbcore: registered new interface driver usbfs [ 0.146241] usbcore: registered new interface driver hub [ 0.146241] usbcore: registered new device driver usb [ 0.204399] EDAC MC: Ver: 3.0.0 [ 0.204399] Registered efivars operations [ 0.207354] PCI: Using ACPI for IRQ routing [ 0.207354] PCI: pci_cache_line_size set to 64 bytes [ 0.207354] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.207354] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.207354] e820: reserve RAM buffer [mem 0xcadc5000-0xcbffffff] [ 0.207354] e820: reserve RAM buffer [mem 0xcb1f5000-0xcbffffff] [ 0.207354] e820: reserve RAM buffer [mem 0xda892000-0xdbffffff] [ 0.207354] e820: reserve RAM buffer [mem 0xdbfff000-0xdbffffff] [ 0.207354] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff] [ 0.208003] NetLabel: Initializing [ 0.208003] NetLabel: domain hash size = 128 [ 0.208003] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.208003] NetLabel: unlabeled traffic allowed by default [ 0.208047] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.208052] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.210071] clocksource: Switched to clocksource hpet [ 0.218025] VFS: Disk quotas dquot_6.6.0 [ 0.218041] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.218138] AppArmor: AppArmor Filesystem Enabled [ 0.218165] pnp: PnP ACPI init [ 0.218299] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.218305] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.218677] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.218679] system 00:01: [io 0xffff] has been reserved [ 0.218681] system 00:01: [io 0xffff] has been reserved [ 0.218682] system 00:01: [io 0xffff] has been reserved [ 0.218684] system 00:01: [io 0x1c00-0x1cfe] could not be reserved [ 0.218685] system 00:01: [io 0x1d00-0x1dfe] could not be reserved [ 0.218687] system 00:01: [io 0x1e00-0x1efe] could not be reserved [ 0.218688] system 00:01: [io 0x1f00-0x1ffe] could not be reserved [ 0.218690] system 00:01: [io 0x1800-0x18fe] has been reserved [ 0.218691] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.218696] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.218719] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.218774] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.218778] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.218824] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.218826] system 00:04: [mem 0xfe800000-0xfe802fff] has been reserved [ 0.218830] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.218905] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.219412] system 00:06: [mem 0xfe102000-0xfe102fff] has been reserved [ 0.219414] system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved [ 0.219415] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved [ 0.219417] system 00:06: [mem 0xfe10c000-0xfe10cfff] has been reserved [ 0.219418] system 00:06: [mem 0xfe10e000-0xfe10efff] has been reserved [ 0.219420] system 00:06: [mem 0xfe112000-0xfe112fff] has been reserved [ 0.219422] system 00:06: [mem 0xfe111000-0xfe111007] has been reserved [ 0.219423] system 00:06: [mem 0xfe111014-0xfe111fff] has been reserved [ 0.219427] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.220253] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.220255] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.220256] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.220258] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.220259] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.220261] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.220262] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.220264] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.220266] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 0.220267] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.220269] system 00:07: [mem 0xf7fee000-0xf7feefff] has been reserved [ 0.220271] system 00:07: [mem 0xf7fd0000-0xf7fdffff] has been reserved [ 0.220274] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.222723] pnp: PnP ACPI: found 8 devices [ 0.228623] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.228647] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.228656] pci 0000:00:1c.2: PCI bridge to [bus 06] [ 0.228660] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.228667] pci 0000:00:1c.3: PCI bridge to [bus 07] [ 0.228669] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 0.228672] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.228675] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.228681] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.228682] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.228684] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.228685] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.228687] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.228688] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.228689] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.228691] pci_bus 0000:00: resource 11 [mem 0xdf200000-0xfeafffff window] [ 0.228693] pci_bus 0000:06: resource 1 [mem 0xf7d00000-0xf7dfffff] [ 0.228694] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.228695] pci_bus 0000:07: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 0.228697] pci_bus 0000:07: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.228847] NET: Registered protocol family 2 [ 0.229039] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.229102] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.229199] TCP: Hash tables configured (established 32768 bind 32768) [ 0.229228] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.229243] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.229288] NET: Registered protocol family 1 [ 0.229301] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.252152] PCI: CLS 64 bytes, default 64 [ 0.252194] Unpacking initramfs... [ 1.075691] Freeing initrd memory: 54640K [ 1.075726] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.075730] software IO TLB [mem 0xc6dc5000-0xcadc5000] (64MB) mapped at [00000000d6850e58-000000003fd936a0] [ 1.075972] Scanning for low memory corruption every 60 seconds [ 1.076561] Initialise system trusted keyrings [ 1.076569] Key type blacklist registered [ 1.076605] workingset: timestamp_bits=36 max_order=20 bucket_order=0 [ 1.077631] zbud: loaded [ 1.078088] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.078210] fuse init (API version 7.26) [ 1.079237] Key type asymmetric registered [ 1.079238] Asymmetric key parser 'x509' registered [ 1.079270] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.079302] io scheduler noop registered [ 1.079303] io scheduler deadline registered [ 1.079347] io scheduler cfq registered (default) [ 1.080000] efifb: probing for efifb [ 1.080030] efifb: framebuffer at 0xe0000000, using 4160k, total 4160k [ 1.080031] efifb: mode is 1366x768x32, linelength=5504, pages=1 [ 1.080032] efifb: scrolling: redraw [ 1.080034] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.080129] Console: switching to colour frame buffer device 170x48 [ 1.080148] fb0: EFI VGA frame buffer device [ 1.080157] intel_idle: MWAIT substates: 0x11142120 [ 1.080158] intel_idle: v0.4.1 model 0x45 [ 1.080343] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.080476] ACPI: AC Adapter [AC] (off-line) [ 1.080537] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 1.080557] ACPI: Lid Switch [LID0] [ 1.080588] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 1.080596] ACPI: Power Button [PWRB] [ 1.080622] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 1.080628] ACPI: Sleep Button [SBTN] [ 1.080656] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.080670] ACPI: Power Button [PWRF] [ 1.094414] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 1.097658] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.097659] ACPI: Thermal Zone [THM] (40 C) [ 1.097812] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.099431] Linux agpgart interface v0.103 [ 1.100717] loop: module loaded [ 1.100867] libphy: Fixed MDIO Bus: probed [ 1.100868] tun: Universal TUN/TAP device driver, 1.6 [ 1.100894] PPP generic driver version 2.4.2 [ 1.100926] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.100928] ehci-pci: EHCI PCI platform driver [ 1.101047] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.101052] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 1.101062] ehci-pci 0000:00:1d.0: debug port 2 [ 1.104964] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.104974] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e1b000 [ 1.120019] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.120071] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.120073] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.120075] usb usb1: Product: EHCI Host Controller [ 1.120077] usb usb1: Manufacturer: Linux 4.15.0-23-generic ehci_hcd [ 1.120079] usb usb1: SerialNumber: 0000:00:1d.0 [ 1.120601] hub 1-0:1.0: USB hub found [ 1.120607] hub 1-0:1.0: 2 ports detected [ 1.121798] ehci-platform: EHCI generic platform driver [ 1.121811] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.121815] ohci-pci: OHCI PCI platform driver [ 1.121824] ohci-platform: OHCI generic platform driver [ 1.121832] uhci_hcd: USB Universal Host Controller Interface driver [ 1.122163] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.122170] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.123234] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810 [ 1.123239] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.123354] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.123355] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.123357] usb usb2: Product: xHCI Host Controller [ 1.123358] usb usb2: Manufacturer: Linux 4.15.0-23-generic xhci-hcd [ 1.123360] usb usb2: SerialNumber: 0000:00:14.0 [ 1.123487] hub 2-0:1.0: USB hub found [ 1.123497] hub 2-0:1.0: 9 ports detected [ 1.125202] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.125206] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.125231] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.125233] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.125234] usb usb3: Product: xHCI Host Controller [ 1.125235] usb usb3: Manufacturer: Linux 4.15.0-23-generic xhci-hcd [ 1.125236] usb usb3: SerialNumber: 0000:00:14.0 [ 1.125315] hub 3-0:1.0: USB hub found [ 1.125321] hub 3-0:1.0: 4 ports detected [ 1.125716] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.125717] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.127197] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.127271] mousedev: PS/2 mouse device common for all mice [ 1.127474] rtc_cmos 00:02: RTC can wake from S4 [ 1.127591] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.127615] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.127622] i2c /dev entries driver [ 1.127712] device-mapper: uevent: version 1.0.3 [ 1.127759] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 1.127766] intel_pstate: Intel P-state driver initializing [ 1.127893] ledtrig-cpu: registered to indicate activity on CPUs [ 1.127895] EFI Variables Facility v0.08 2004-May-17 [ 1.131954] NET: Registered protocol family 10 [ 1.132718] ACPI: Battery Slot [BAT0] (battery present) [ 1.137063] Segment Routing with IPv6 [ 1.137083] NET: Registered protocol family 17 [ 1.137129] Key type dns_resolver registered [ 1.137375] RAS: Correctable Errors collector initialized. [ 1.137403] microcode: sig=0x40651, pf=0x40, revision=0x23 [ 1.137446] microcode: Microcode Update Driver: v2.2. [ 1.137455] sched_clock: Marking stable (1137442913, 0)->(1121182998, 16259915) [ 1.137621] registered taskstats version 1 [ 1.137629] Loading compiled-in X.509 certificates [ 1.139924] Loaded X.509 cert 'Build time autogenerated kernel key: d77482c25b833df502ed38a87c5d7f330fdff3cb' [ 1.140130] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring [ 1.140153] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring [ 1.140249] Couldn't get size: 0x800000000000000e [ 1.140251] MODSIGN: Couldn't get UEFI MokListRT [ 1.140578] zswap: loaded using pool lzo/zbud [ 1.143772] Key type big_key registered [ 1.143775] Key type trusted registered [ 1.145228] Key type encrypted registered [ 1.145231] AppArmor: AppArmor sha1 policy hashing enabled [ 1.145233] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 1.145257] evm: HMAC attrs: 0x1 [ 1.145645] Magic number: 6:756:608 [ 1.145757] rtc_cmos 00:02: setting system clock to 2018-06-29 00:36:57 UTC (1530232617) [ 1.145839] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.145839] EDD information not available. [ 1.148358] Freeing unused kernel memory: 2408K [ 1.150736] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.172116] Write protecting the kernel read-only data: 20480k [ 1.172728] Freeing unused kernel memory: 2008K [ 1.177037] Freeing unused kernel memory: 1904K [ 1.182673] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.182674] x86/mm: Checking user space page tables [ 1.188217] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.265090] hidraw: raw HID events driver (C) Jiri Kosina [ 1.288124] i2c_hid i2c-DLL0651:00: i2c-DLL0651:00 supply vdd not found, using dummy regulator [ 1.295116] ahci 0000:00:1f.2: version 3.0 [ 1.295761] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found [ 1.299117] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.299126] r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.299590] r8169 0000:07:00.0 eth0: RTL8106e at 0x000000002901e8a3, 74:e6:e2:40:ad:af, XID 04900000 IRQ 42 [ 1.305435] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode [ 1.305439] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 1.312647] scsi host0: ahci [ 1.313084] scsi host1: ahci [ 1.313205] scsi host2: ahci [ 1.313554] scsi host3: ahci [ 1.313613] ata1: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a100 irq 41 [ 1.313616] ata2: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a180 irq 41 [ 1.313617] ata3: DUMMY [ 1.313618] ata4: DUMMY [ 1.316609] r8169 0000:07:00.0 enp7s0: renamed from eth0 [ 1.317365] media: Linux media interface: v0.10 [ 1.322132] Linux video capture interface: v2.00 [ 1.338187] [drm] Memory usable by graphics device = 2048M [ 1.338190] checking generic (e0000000 410000) vs hw (e0000000 10000000) [ 1.338190] fb: switching to inteldrmfb from EFI VGA [ 1.338214] Console: switching to colour dummy device 80x25 [ 1.338307] [drm] Replacing VGA console driver [ 1.344074] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.344075] [drm] Driver supports precise vblank timestamp query. [ 1.346113] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.354709] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0 [ 1.356543] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.356901] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 1.372779] fbcon: inteldrmfb (fb0) is primary device [ 1.372839] Console: switching to colour frame buffer device 170x48 [ 1.372863] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.394023] rmi4_f01 rmi4-00.fn01: found RMI device, manufacturer: Synaptics, product: s3203, fw id: 1567123 [ 1.456061] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.476494] input: Synaptics s3203 as /devices/pci0000:00/INT33C3:00/i2c-1/i2c-DLL0651:00/0018:06CB:2985.0001/input/input5 [ 1.476645] hid-rmi 0018:06CB:2985.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL0651:00 06CB:2985] on i2c-DLL0651:00 [ 1.612477] usb 1-1: New USB device found, idVendor=8087, idProduct=8000 [ 1.612480] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.612835] hub 1-1:1.0: USB hub found [ 1.612893] hub 1-1:1.0: 8 ports detected [ 1.627589] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.627608] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.630466] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A1B0, max UDMA/100 [ 1.632791] ata2.00: configured for UDMA/100 [ 1.634007] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2BA30003, max UDMA/133 [ 1.634010] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.640423] ata1.00: configured for UDMA/133 [ 1.640686] scsi 0:0:0:0: Direct-Access ATA ST1000LM024 HN-M 0003 PQ: 0 ANSI: 5 [ 1.641181] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.641216] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.641220] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.641241] sd 0:0:0:0: [sda] Write Protect is off [ 1.641244] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.641287] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.643168] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GU90N A1B0 PQ: 0 ANSI: 5 [ 1.697492] sda: sda1 sda2 [ 1.697996] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.702272] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.702273] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.702409] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.702513] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.904033] usb 1-1.2: new low-speed USB device number 3 using ehci-pci [ 2.017476] usb 1-1.2: New USB device found, idVendor=276d, idProduct=1160 [ 2.017479] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.017481] usb 1-1.2: Product: G Mouse [ 2.017483] usb 1-1.2: Manufacturer: YSTEK [ 2.023537] usbcore: registered new interface driver usbhid [ 2.023539] usbhid: USB HID core driver [ 2.026041] input: YSTEK G Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:276D:1160.0002/input/input7 [ 2.026147] hid-generic 0003:276D:1160.0002: input,hidraw1: USB HID v1.10 Mouse [YSTEK G Mouse] on usb-0000:00:1d.0-1.2/input0 [ 2.076059] tsc: Refined TSC clocksource calibration: 1696.073 MHz [ 2.076069] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1872a9796f1, max_idle_ns: 440795212049 ns [ 2.096101] usb 1-1.5: new high-speed USB device number 4 using ehci-pci [ 2.209920] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 2.270690] usb 1-1.5: New USB device found, idVendor=0c45, idProduct=6a04 [ 2.270693] usb 1-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 2.270695] usb 1-1.5: Product: Integrated_Webcam_HD [ 2.270697] usb 1-1.5: Manufacturer: CNFDH85K541030000VH2 [ 2.356046] usb 1-1.6: new full-speed USB device number 5 using ehci-pci [ 2.465150] usb 1-1.6: New USB device found, idVendor=0cf3, idProduct=0036 [ 2.465153] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.544051] usb 1-1.8: new high-speed USB device number 6 using ehci-pci [ 2.652896] usb 1-1.8: New USB device found, idVendor=0bda, idProduct=0129 [ 2.652899] usb 1-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.652901] usb 1-1.8: Product: USB2.0-CRW [ 2.652902] usb 1-1.8: Manufacturer: Generic [ 2.652904] usb 1-1.8: SerialNumber: 20100201396000000 [ 3.100277] clocksource: Switched to clocksource tsc [ 3.630172] random: crng init done [ 3.631770] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.751785] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 3.768165] systemd[1]: Detected architecture x86-64. [ 3.783893] systemd[1]: Set hostname to . [ 6.175882] systemd[1]: Reached target Libvirt guests shutdown. [ 6.176151] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 6.176212] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.176387] systemd[1]: Created slice User and Session Slice. [ 6.176412] systemd[1]: Reached target Remote File Systems. [ 6.176535] systemd[1]: Created slice System Slice. [ 6.176613] systemd[1]: Listening on LVM2 metadata daemon socket. [ 7.042384] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 7.406147] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS [ 7.493673] systemd-journald[290]: Received request to flush runtime journal from PID 1 [ 8.067086] lp: driver loaded but no devices found [ 8.201480] ppdev: user-space parallel port driver [ 22.696474] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels [ 22.734218] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 22.761690] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 22.776881] Bluetooth: Core ver 2.22 [ 22.776900] NET: Registered protocol family 31 [ 22.776901] Bluetooth: HCI device and connection manager initialized [ 22.776906] Bluetooth: HCI socket layer initialized [ 22.776909] Bluetooth: L2CAP socket layer initialized [ 22.776915] Bluetooth: SCO socket layer initialized [ 22.784507] usbcore: registered new interface driver btusb [ 22.786748] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 22.826711] ath9k 0000:06:00.0: enabling device (0000 -> 0002) [ 22.826930] ath: phy0: WB335 1-ANT card detected [ 22.826932] ath: phy0: Set BT/WLAN RX diversity capability [ 22.833768] ath: phy0: Enable LNA combining [ 22.834874] ath: phy0: ASPM enabled: 0x42 [ 22.834876] ath: EEPROM regdomain: 0x60 [ 22.834877] ath: EEPROM indicates we should expect a direct regpair map [ 22.834879] ath: Country alpha2 being used: 00 [ 22.834880] ath: Regpair used: 0x60 [ 22.839037] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 22.839258] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 22.839322] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 22.839428] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 22.839998] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffb707c1100000, irq=18 [ 22.892534] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3234: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 22.892536] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 22.892538] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 22.892539] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 22.892540] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 22.892542] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x19 [ 22.892544] snd_hda_codec_realtek hdaudioC1D0: Headphone Mic=0x1a [ 22.892545] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 22.919558] dell-smbios A80593CE-A997-11DA-B012-B622A1EF5492: WMI SMBIOS userspace interface not supported(0), try upgrading to a newer BIOS [ 23.027760] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 23.027762] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 23.027763] RAPL PMU: hw unit of domain package 2^-14 Joules [ 23.027764] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 23.027765] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 23.040913] AVX2 version of gcm_enc/dec engaged. [ 23.040914] AES CTR mode by8 optimization enabled [ 23.077760] intel_rapl: Found RAPL domain package [ 23.077762] intel_rapl: Found RAPL domain core [ 23.077763] intel_rapl: Found RAPL domain uncore [ 23.077764] intel_rapl: Found RAPL domain dram [ 23.077766] intel_rapl: RAPL package 0 domain package locked by BIOS [ 23.077771] intel_rapl: RAPL package 0 domain dram locked by BIOS [ 23.353815] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input8 [ 23.401446] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9 [ 23.750193] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10 [ 23.750238] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11 [ 23.750279] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12 [ 23.750320] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13 [ 23.750359] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14 [ 23.772947] usbcore: registered new interface driver ath3k [ 23.839830] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 23.890278] usb 1-1.6: USB disconnect, device number 5 [ 24.055002] usbcore: registered new interface driver rtsx_usb [ 24.067198] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:6a04) [ 24.107369] uvcvideo 1-1.5:1.0: Entity type for entity Extension 4 was not initialized! [ 24.107372] uvcvideo 1-1.5:1.0: Entity type for entity Extension 3 was not initialized! [ 24.107374] uvcvideo 1-1.5:1.0: Entity type for entity Processing 2 was not initialized! [ 24.107376] uvcvideo 1-1.5:1.0: Entity type for entity Camera 1 was not initialized! [ 24.107460] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input15 [ 24.107530] usbcore: registered new interface driver uvcvideo [ 24.107530] USB Video Class driver (1.1.1) [ 24.124038] usb 1-1.6: new full-speed USB device number 7 using ehci-pci [ 28.490092] ath9k 0000:06:00.0 wlp6s0: renamed from wlan0 [ 29.232065] usb 1-1.6: device descriptor read/64, error -110 [ 29.555116] audit: type=1400 audit(1530232645.902:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1005 comm="apparmor_parser" [ 29.555121] audit: type=1400 audit(1530232645.902:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1005 comm="apparmor_parser" [ 29.555124] audit: type=1400 audit(1530232645.902:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1005 comm="apparmor_parser" [ 29.555363] audit: type=1400 audit(1530232645.902:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1001 comm="apparmor_parser" [ 29.555366] audit: type=1400 audit(1530232645.902:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1001 comm="apparmor_parser" [ 29.555369] audit: type=1400 audit(1530232645.902:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1001 comm="apparmor_parser" [ 29.555372] audit: type=1400 audit(1530232645.902:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1001 comm="apparmor_parser" [ 29.556775] audit: type=1400 audit(1530232645.906:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=1006 comm="apparmor_parser" [ 29.556872] audit: type=1400 audit(1530232645.906:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1007 comm="apparmor_parser" [ 29.556875] audit: type=1400 audit(1530232645.906:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc//sanitized_helper" pid=1007 comm="apparmor_parser" [ 34.457227] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready [ 34.633174] usb 1-1.6: New USB device found, idVendor=0cf3, idProduct=0036 [ 34.633178] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 34.709219] r8169 0000:07:00.0 enp7s0: link down [ 34.709306] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready [ 34.733634] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 34.733636] Bluetooth: BNEP filters: protocol multicast [ 34.733640] Bluetooth: BNEP socket layer initialized [ 34.747068] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready [ 34.761280] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready [ 34.830612] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready [ 35.915620] wlp6s0: authenticate with c0:56:27:27:93:cd [ 35.927392] wlp6s0: send auth to c0:56:27:27:93:cd (try 1/3) [ 35.929328] wlp6s0: authenticated [ 35.932070] wlp6s0: associate with c0:56:27:27:93:cd (try 1/3) [ 35.935862] wlp6s0: RX AssocResp from c0:56:27:27:93:cd (capab=0x411 status=0 aid=2) [ 35.935942] wlp6s0: associated [ 35.975807] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready [ 37.772040] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 37.842482] Ebtables v2.0 registered [ 38.357112] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 38.358077] virbr0: port 1(virbr0-nic) entered blocking state [ 38.358080] virbr0: port 1(virbr0-nic) entered disabled state [ 38.358144] device virbr0-nic entered promiscuous mode [ 38.432305] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 38.818517] virbr0: port 1(virbr0-nic) entered blocking state [ 38.818522] virbr0: port 1(virbr0-nic) entered listening state [ 38.868717] virbr0: port 1(virbr0-nic) entered disabled state [ 41.827750] Bluetooth: RFCOMM TTY layer initialized [ 41.827758] Bluetooth: RFCOMM socket layer initialized [ 41.827762] Bluetooth: RFCOMM ver 1.11 [ 46.931846] rfkill: input handler disabled [ 1747.657916] wlp6s0: deauthenticating from c0:56:27:27:93:cd by local choice (Reason: 3=DEAUTH_LEAVING) [ 1751.233159] PM: suspend entry (deep) [ 1751.233162] PM: Syncing filesystems ... done. [ 1752.106554] Freezing user space processes ... (elapsed 0.181 seconds) done. [ 1752.288178] OOM killer disabled. [ 1752.288180] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 1752.289880] Suspending console(s) (use no_console_suspend to debug) [ 1752.305912] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1752.306008] sd 0:0:0:0: [sda] Stopping disk [ 1753.419604] ACPI: Preparing to enter system sleep state S3 [ 1753.431654] PM: Saving platform NVS memory [ 1753.431761] Disabling non-boot CPUs ... [ 1753.446268] IRQ 44: no longer affine to CPU1 [ 1753.447290] smpboot: CPU 1 is now offline [ 1753.470330] IRQ 42: no longer affine to CPU2 [ 1753.471365] smpboot: CPU 2 is now offline [ 1753.494325] IRQ 18: no longer affine to CPU3 [ 1753.495356] smpboot: CPU 3 is now offline [ 1753.498647] ACPI: Low-level resume complete [ 1753.498765] PM: Restoring platform NVS memory [ 1753.504543] Enabling non-boot CPUs ... [ 1753.504614] x86: Booting SMP configuration: [ 1753.504616] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 1753.508544] cache: parent cpu1 should not be sleeping [ 1753.508942] CPU1 is up [ 1753.508991] smpboot: Booting Node 0 Processor 2 APIC 0x1 [ 1753.509830] cache: parent cpu2 should not be sleeping [ 1753.510134] CPU2 is up [ 1753.510182] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 1753.510915] cache: parent cpu3 should not be sleeping [ 1753.511228] CPU3 is up [ 1753.517066] ACPI: Waking up from system sleep state S3 [ 1753.749950] ath: phy0: ASPM enabled: 0x42 [ 1753.751668] sd 0:0:0:0: [sda] Starting disk [ 1753.751701] ACPI: button: The lid device is not compliant to SW_LID. [ 1753.934694] r8169 0000:07:00.0 enp7s0: link down [ 1754.064443] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1754.068685] ata2.00: configured for UDMA/100 [ 1754.193357] usb 1-1.2: reset low-speed USB device number 3 using ehci-pci [ 1754.569350] usb 1-1.8: reset high-speed USB device number 6 using ehci-pci [ 1754.757357] usb 1-1.6: reset full-speed USB device number 7 using ehci-pci [ 1754.865695] usb 1-1.6: device firmware changed [ 1754.945327] usb 1-1.5: reset high-speed USB device number 4 using ehci-pci [ 1755.124513] OOM killer enabled. [ 1755.124515] Restarting tasks ... [ 1755.132354] pci_bus 0000:04: Allocating resources [ 1755.132368] pcieport 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 1755.132372] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000 [ 1755.132375] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000 [ 1755.132381] pci_bus 0000:06: Allocating resources [ 1755.132397] pcieport 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000 [ 1755.132400] pcieport 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000 [ 1755.132406] pci_bus 0000:07: Allocating resources [ 1755.132430] pcieport 0000:00:1c.0: BAR 14: assigned [mem 0xdf200000-0xdf3fffff] [ 1755.132440] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xdf400000-0xdf5fffff 64bit pref] [ 1755.132449] pcieport 0000:00:1c.2: BAR 15: assigned [mem 0xdf600000-0xdf7fffff 64bit pref] [ 1755.132453] pcieport 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 1755.132456] pcieport 0000:00:1c.2: BAR 13: assigned [io 0x3000-0x3fff] [ 1755.133181] pci_bus 0000:04: Allocating resources [ 1755.133193] pci_bus 0000:06: Allocating resources [ 1755.133211] pci_bus 0000:07: Allocating resources [ 1755.134868] usb 1-1.6: USB disconnect, device number 7 [ 1755.143710] done. [ 1755.190980] PM: suspend exit [ 1755.213291] usb 1-1.6: new full-speed USB device number 8 using ehci-pci [ 1755.322749] usb 1-1.6: New USB device found, idVendor=0cf3, idProduct=0036 [ 1755.322757] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1755.543755] usb 1-1.6: USB disconnect, device number 8 [ 1755.773303] usb 1-1.6: new full-speed USB device number 9 using ehci-pci [ 1755.985345] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1755.997965] ata1.00: configured for UDMA/133 [ 1756.235878] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready [ 1756.418413] r8169 0000:07:00.0 enp7s0: link down [ 1756.418480] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready [ 1756.419500] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready [ 1756.435032] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready [ 1756.499025] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready [ 1757.595006] wlp6s0: authenticate with c0:56:27:27:93:cd [ 1757.606738] wlp6s0: send auth to c0:56:27:27:93:cd (try 1/3) [ 1757.614168] wlp6s0: authenticated [ 1757.621288] wlp6s0: associate with c0:56:27:27:93:cd (try 1/3) [ 1757.627615] wlp6s0: RX AssocResp from c0:56:27:27:93:cd (capab=0x411 status=0 aid=2) [ 1757.627725] wlp6s0: associated [ 1757.650879] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready [ 1757.807339] atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0). [ 1757.807342] atkbd serio0: Use 'setkeycodes e00d ' to make it known. [ 1760.889226] usb 1-1.6: device descriptor read/64, error -110 [ 1771.414262] usb 1-1.6: New USB device found, idVendor=0cf3, idProduct=0036 [ 1771.414268] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 7646.680414] xhci_hcd 0000:00:14.0: Root hub is not suspended [ 7646.915841] usb 2-1: new low-speed USB device number 2 using xhci_hcd [ 7647.043961] usb 2-1: device descriptor read/64, error -71 [ 7647.279886] usb 2-1: device descriptor read/64, error -71 [ 7647.515821] usb 2-1: new low-speed USB device number 3 using xhci_hcd [ 7647.643862] usb 2-1: device descriptor read/64, error -71 [ 7647.879881] usb 2-1: device descriptor read/64, error -71 [ 7647.987887] usb usb2-port1: attempt power cycle [ 7648.639787] usb 2-1: new low-speed USB device number 4 using xhci_hcd [ 7648.640295] usb 2-1: Device not responding to setup address. [ 7648.848285] usb 2-1: Device not responding to setup address. [ 7649.055775] usb 2-1: device not accepting address 4, error -71 [ 7649.183674] usb 2-1: new low-speed USB device number 5 using xhci_hcd [ 7649.184078] usb 2-1: Device not responding to setup address. [ 7649.392249] usb 2-1: Device not responding to setup address. [ 7649.599772] usb 2-1: device not accepting address 5, error -71 [ 7649.599858] usb usb2-port1: unable to enumerate USB device

Lvaskz commented 6 years ago

Here I disconnected and connected again: ~$ dmesg -w [ 0.000000] microcode: microcode updated early to revision 0x23, date = 2018-01-18 [ 0.000000] Linux version 4.15.0-23-generic (buildd@lgw01-amd64-055) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #25-Ubuntu SMP Wed May 23 18:02:16 UTC 2018 (Ubuntu 4.15.0-23.25-generic 4.15.18) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-23-generic root=UUID=9ec20f28-0305-4600-8ed3-22c7465ef553 ro quiet splash vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'

[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cadc4fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cadc5000-0x00000000cadcbfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cadcc000-0x00000000cb1f4fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cb1f5000-0x00000000cb7f0fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cb7f1000-0x00000000da891fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da892000-0x00000000dabdafff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dabdb000-0x00000000dabf5fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dabf6000-0x00000000db571fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000db572000-0x00000000dbf6ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dbf70000-0x00000000dbffdfff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000dbffe000-0x00000000dbffefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by American Megatrends [ 0.000000] efi: ACPI=0xdabe0000 ACPI 2.0=0xdabe0000 SMBIOS=0xf04c0 MPS=0xfd820 [ 0.000000] secureboot: Secure boot could not be determined (mode 0) [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Dell Inc. Inspiron 3442/0RW1RW, BIOS A05 11/14/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7F00000000 write-back [ 0.000000] 1 base 0100000000 mask 7FE0000000 write-back [ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable [ 0.000000] 3 base 00DE000000 mask 7FFE000000 uncachable [ 0.000000] 4 base 00DD000000 mask 7FFF000000 uncachable [ 0.000000] 5 base 011FE00000 mask 7FFFE00000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] total RAM covered: 4046M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 7 lose cover RAM: 0G [ 0.000000] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdbfff max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fdad0-0x000fdadf] mapped at [ (ptrval)] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x5cb3f000, 0x5cb3ffff] PGTABLE [ 0.000000] BRK [0x5cb40000, 0x5cb40fff] PGTABLE [ 0.000000] BRK [0x5cb41000, 0x5cb41fff] PGTABLE [ 0.000000] BRK [0x5cb42000, 0x5cb42fff] PGTABLE [ 0.000000] BRK [0x5cb43000, 0x5cb43fff] PGTABLE [ 0.000000] BRK [0x5cb44000, 0x5cb44fff] PGTABLE [ 0.000000] BRK [0x5cb45000, 0x5cb45fff] PGTABLE [ 0.000000] BRK [0x5cb46000, 0x5cb46fff] PGTABLE [ 0.000000] BRK [0x5cb47000, 0x5cb47fff] PGTABLE [ 0.000000] BRK [0x5cb48000, 0x5cb48fff] PGTABLE [ 0.000000] BRK [0x5cb49000, 0x5cb49fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x31537000-0x34a92fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000DABE0000 000024 (v02 DELL ) [ 0.000000] ACPI: XSDT 0x00000000DABE0098 0000B4 (v01 DELL WN09 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000DABF07C8 00010C (v05 DELL WN09 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000DABE01E0 0105E4 (v02 DELL WN09 00000000 INTL 20120711) [ 0.000000] ACPI: FACS 0x00000000DB56EF80 000040 [ 0.000000] ACPI: APIC 0x00000000DABF08D8 000072 (v03 DELL WN09 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000DABF0950 000044 (v01 DELL WN09 01072009 AMI 00010013) [ 0.000000] ACPI: ASF! 0x00000000DABF0998 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: LPIT 0x00000000DABF0A40 000094 (v01 ALASKA 00000000 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000DABF0AD8 000228 (v01 INTEL sensrhub 00000000 INTL 20120711) [ 0.000000] ACPI: SLIC 0x00000000DABF0D00 000176 (v01 DELL WN09 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x00000000DABF0E78 0004B5 (v01 PmRef Cpu0Ist 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000DABF1330 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711) [ 0.000000] ACPI: MCFG 0x00000000DABF1E08 00003C (v01 DELL WN09 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000DABF1E48 000038 (v01 DELL WN09 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000DABF1E80 000315 (v01 SataRe SataTabl 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000DABF2198 0035A5 (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.000000] ACPI: MSDM 0x00000000DABF5740 000055 (v03 DELL WN09 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x00000000DABF5798 00004B (v01 MeSsdt MeSsdt 00003000 INTL 20120711) [ 0.000000] ACPI: TPM2 0x00000000DABF57E8 000034 (v03 00000000 00000000) [ 0.000000] ACPI: BGRT 0x00000000DABF5820 000038 (v00 DELL WN09 01072009 AMI 00010013) [ 0.000000] ACPI: CSRT 0x00000000DABF5858 0000C4 (v01 INTL HSWULT-R 00000001 INTL 20100528) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x11fdd5000-0x11fdfffff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000011fdfffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cadc4fff] [ 0.000000] node 0: [mem 0x00000000cadcc000-0x00000000cb1f4fff] [ 0.000000] node 0: [mem 0x00000000cb7f1000-0x00000000da891fff] [ 0.000000] node 0: [mem 0x00000000dbffe000-0x00000000dbffefff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000011fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fdfffff] [ 0.000000] On node 0 totalpages: 1024045 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 26 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13899 pages used for memmap [ 0.000000] DMA32 zone: 889488 pages, LIFO batch:31 [ 0.000000] Normal zone: 2040 pages used for memmap [ 0.000000] Normal zone: 130560 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 98 pages [ 0.000000] Reserving Intel graphics memory at 0x00000000dd200000-0x00000000df1fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcadc5000-0xcadcbfff] [ 0.000000] PM: Registered nosave memory: [mem 0xcb1f5000-0xcb7f0fff] [ 0.000000] PM: Registered nosave memory: [mem 0xda892000-0xdabdafff] [ 0.000000] PM: Registered nosave memory: [mem 0xdabdb000-0xdabf5fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdabf6000-0xdb571fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb572000-0xdbf6ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdbf70000-0xdbffdfff] [ 0.000000] PM: Registered nosave memory: [mem 0xdbfff000-0xdcffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf1fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1008016 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-23-generic root=UUID=9ec20f28-0305-4600-8ed3-22c7465ef553 ro quiet splash vt.handoff=1 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3688712K/4096180K available (12300K kernel code, 2470K rwdata, 4240K rodata, 2408K init, 2416K bss, 407468K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 39083 entries in 153 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 524544, nr_irqs: 728, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#1 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 7 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 1696.068 MHz processor [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3392.13 BogoMIPS (lpj=6784272) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.024000] Security Framework initialized [ 0.024000] Yama: becoming mindful. [ 0.024000] AppArmor: AppArmor initialized [ 0.024000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.024000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.024000] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.024000] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.024000] CPU: Physical Processor ID: 0 [ 0.024000] CPU: Processor Core ID: 0 [ 0.024000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.024000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.024000] mce: CPU supports 7 MCE banks [ 0.024000] CPU0: Thermal monitoring enabled (TM1) [ 0.024000] process: using mwait in idle threads [ 0.024000] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.024000] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.024000] Spectre V2 : Mitigation: Full generic retpoline [ 0.024000] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier [ 0.024000] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.024000] Speculative Store Bypass: Vulnerable [ 0.024000] Freeing SMP alternatives memory: 36K [ 0.036779] TSC deadline timer enabled [ 0.036782] smpboot: CPU0: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz (family: 0x6, model: 0x45, stepping: 0x1) [ 0.036849] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.036889] ... version: 3 [ 0.036890] ... bit width: 48 [ 0.036890] ... generic registers: 4 [ 0.036891] ... value mask: 0000ffffffffffff [ 0.036892] ... max period: 00007fffffffffff [ 0.036892] ... fixed-purpose events: 3 [ 0.036893] ... event mask: 000000070000000f [ 0.036928] Hierarchical SRCU implementation. [ 0.037904] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.037918] smp: Bringing up secondary CPUs ... [ 0.037990] x86: Booting SMP configuration: [ 0.037991] .... node #0, CPUs: #1 #2 #3 [ 0.039728] smp: Brought up 1 node, 4 CPUs [ 0.039728] smpboot: Max logical packages: 1 [ 0.039728] smpboot: Total of 4 processors activated (13568.54 BogoMIPS) [ 0.040219] devtmpfs: initialized [ 0.040219] x86/mm: Memory block size: 128MB [ 0.040401] evm: security.selinux [ 0.040401] evm: security.SMACK64 [ 0.040402] evm: security.SMACK64EXEC [ 0.040402] evm: security.SMACK64TRANSMUTE [ 0.040403] evm: security.SMACK64MMAP [ 0.040403] evm: security.apparmor [ 0.040404] evm: security.ima [ 0.040404] evm: security.capability [ 0.040418] PM: Registering ACPI NVS region [mem 0xcadc5000-0xcadcbfff] (28672 bytes) [ 0.040418] PM: Registering ACPI NVS region [mem 0xdabf6000-0xdb571fff] (9945088 bytes) [ 0.040418] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.040418] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.040418] pinctrl core: initialized pinctrl subsystem [ 0.040418] RTC time: 0:36:56, date: 06/29/18 [ 0.040418] NET: Registered protocol family 16 [ 0.040418] audit: initializing netlink subsys (disabled) [ 0.040418] audit: type=2000 audit(1530232616.040:1): state=initialized audit_enabled=0 res=1 [ 0.040418] cpuidle: using governor ladder [ 0.040418] cpuidle: using governor menu [ 0.040418] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.040418] ACPI: bus type PCI registered [ 0.040418] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.040418] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.040418] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.040418] PCI: Using configuration type 1 for base access [ 0.040418] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.041087] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.041087] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.041087] ACPI: Added _OSI(Module Device) [ 0.041087] ACPI: Added _OSI(Processor Device) [ 0.041087] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.041087] ACPI: Added _OSI(Processor Aggregator Device) [ 0.041087] ACPI: Executed 1 blocks of module-level executable AML code [ 0.051879] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.084686] ACPI: Dynamic OEM Table Load: [ 0.084692] ACPI: SSDT 0xFFFF8E30DA72F400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.084882] ACPI: Dynamic OEM Table Load: [ 0.084882] ACPI: SSDT 0xFFFF8E30DA606000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.085141] ACPI: Dynamic OEM Table Load: [ 0.085141] ACPI: SSDT 0xFFFF8E30DA6E9A00 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.085141] ACPI: Interpreter enabled [ 0.085141] ACPI: (supports S0 S3 S4 S5) [ 0.085141] ACPI: Using IOAPIC for interrupt routing [ 0.085141] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.085479] ACPI: Enabled 6 GPEs in block 00 to 7F [ 0.109084] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.109089] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.109416] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 0.109626] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 0.109627] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.110263] PCI host bridge to bus 0000:00 [ 0.110266] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.110268] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.110269] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.110270] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.110272] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.110273] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.110274] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.110275] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window] [ 0.110277] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.110285] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000 [ 0.110400] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000 [ 0.110411] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] [ 0.110417] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.110421] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.110434] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.110526] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300 [ 0.110535] pci 0000:00:03.0: reg 0x10: [mem 0xf7e14000-0xf7e17fff 64bit] [ 0.110655] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330 [ 0.110674] pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit] [ 0.110727] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.110817] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000 [ 0.110836] pci 0000:00:16.0: reg 0x10: [mem 0xf7e1d000-0xf7e1d01f 64bit] [ 0.110892] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.110986] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300 [ 0.111001] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e10000-0xf7e13fff 64bit] [ 0.111055] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.111147] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400 [ 0.111212] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.111363] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400 [ 0.111430] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.111577] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400 [ 0.111644] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.111795] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320 [ 0.111815] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e1b000-0xf7e1b3ff] [ 0.111895] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.111989] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100 [ 0.116186] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601 [ 0.116200] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7] [ 0.116206] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3] [ 0.116213] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097] [ 0.116219] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083] [ 0.116225] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.116231] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e1a000-0xf7e1a7ff] [ 0.116263] pci 0000:00:1f.2: PME# supported from D3hot [ 0.116346] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500 [ 0.116361] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e19000-0xf7e190ff 64bit] [ 0.116379] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.116537] acpiphp: Slot [1] registered [ 0.116542] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.116615] pci 0000:06:00.0: [168c:0036] type 00 class 0x028000 [ 0.116645] pci 0000:06:00.0: reg 0x10: [mem 0xf7d00000-0xf7d7ffff 64bit] [ 0.116680] pci 0000:06:00.0: reg 0x30: [mem 0xf7d80000-0xf7d8ffff pref] [ 0.116750] pci 0000:06:00.0: supports D1 D2 [ 0.116751] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.128037] pci 0000:00:1c.2: PCI bridge to [bus 06] [ 0.128042] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.128135] pci 0000:07:00.0: [10ec:8136] type 00 class 0x020000 [ 0.128167] pci 0000:07:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 0.128197] pci 0000:07:00.0: reg 0x18: [mem 0xf7c00000-0xf7c00fff 64bit] [ 0.128216] pci 0000:07:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref] [ 0.128322] pci 0000:07:00.0: supports D1 D2 [ 0.128324] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.140025] pci 0000:00:1c.3: PCI bridge to [bus 07] [ 0.140029] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 0.140033] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.140038] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.141967] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) [ 0.142035] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.142102] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) [ 0.142170] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) [ 0.142239] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.142306] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.142374] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) [ 0.142442] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) [ 0.146230] SCSI subsystem initialized [ 0.146241] libata version 3.00 loaded. [ 0.146241] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.146241] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.146241] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.146241] vgaarb: loaded [ 0.146241] ACPI: bus type USB registered [ 0.146241] usbcore: registered new interface driver usbfs [ 0.146241] usbcore: registered new interface driver hub [ 0.146241] usbcore: registered new device driver usb [ 0.204399] EDAC MC: Ver: 3.0.0 [ 0.204399] Registered efivars operations [ 0.207354] PCI: Using ACPI for IRQ routing [ 0.207354] PCI: pci_cache_line_size set to 64 bytes [ 0.207354] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.207354] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.207354] e820: reserve RAM buffer [mem 0xcadc5000-0xcbffffff] [ 0.207354] e820: reserve RAM buffer [mem 0xcb1f5000-0xcbffffff] [ 0.207354] e820: reserve RAM buffer [mem 0xda892000-0xdbffffff] [ 0.207354] e820: reserve RAM buffer [mem 0xdbfff000-0xdbffffff] [ 0.207354] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff] [ 0.208003] NetLabel: Initializing [ 0.208003] NetLabel: domain hash size = 128 [ 0.208003] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.208003] NetLabel: unlabeled traffic allowed by default [ 0.208047] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.208052] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.210071] clocksource: Switched to clocksource hpet [ 0.218025] VFS: Disk quotas dquot_6.6.0 [ 0.218041] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.218138] AppArmor: AppArmor Filesystem Enabled [ 0.218165] pnp: PnP ACPI init [ 0.218299] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.218305] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.218677] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.218679] system 00:01: [io 0xffff] has been reserved [ 0.218681] system 00:01: [io 0xffff] has been reserved [ 0.218682] system 00:01: [io 0xffff] has been reserved [ 0.218684] system 00:01: [io 0x1c00-0x1cfe] could not be reserved [ 0.218685] system 00:01: [io 0x1d00-0x1dfe] could not be reserved [ 0.218687] system 00:01: [io 0x1e00-0x1efe] could not be reserved [ 0.218688] system 00:01: [io 0x1f00-0x1ffe] could not be reserved [ 0.218690] system 00:01: [io 0x1800-0x18fe] has been reserved [ 0.218691] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.218696] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.218719] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.218774] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.218778] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.218824] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.218826] system 00:04: [mem 0xfe800000-0xfe802fff] has been reserved [ 0.218830] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.218905] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.219412] system 00:06: [mem 0xfe102000-0xfe102fff] has been reserved [ 0.219414] system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved [ 0.219415] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved [ 0.219417] system 00:06: [mem 0xfe10c000-0xfe10cfff] has been reserved [ 0.219418] system 00:06: [mem 0xfe10e000-0xfe10efff] has been reserved [ 0.219420] system 00:06: [mem 0xfe112000-0xfe112fff] has been reserved [ 0.219422] system 00:06: [mem 0xfe111000-0xfe111007] has been reserved [ 0.219423] system 00:06: [mem 0xfe111014-0xfe111fff] has been reserved [ 0.219427] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.220253] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.220255] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.220256] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.220258] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.220259] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.220261] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.220262] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.220264] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.220266] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 0.220267] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.220269] system 00:07: [mem 0xf7fee000-0xf7feefff] has been reserved [ 0.220271] system 00:07: [mem 0xf7fd0000-0xf7fdffff] has been reserved [ 0.220274] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.222723] pnp: PnP ACPI: found 8 devices [ 0.228623] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.228647] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.228656] pci 0000:00:1c.2: PCI bridge to [bus 06] [ 0.228660] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.228667] pci 0000:00:1c.3: PCI bridge to [bus 07] [ 0.228669] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 0.228672] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.228675] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.228681] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.228682] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.228684] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.228685] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.228687] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.228688] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.228689] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.228691] pci_bus 0000:00: resource 11 [mem 0xdf200000-0xfeafffff window] [ 0.228693] pci_bus 0000:06: resource 1 [mem 0xf7d00000-0xf7dfffff] [ 0.228694] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.228695] pci_bus 0000:07: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 0.228697] pci_bus 0000:07: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.228847] NET: Registered protocol family 2 [ 0.229039] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.229102] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.229199] TCP: Hash tables configured (established 32768 bind 32768) [ 0.229228] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.229243] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.229288] NET: Registered protocol family 1 [ 0.229301] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.252152] PCI: CLS 64 bytes, default 64 [ 0.252194] Unpacking initramfs... [ 1.075691] Freeing initrd memory: 54640K [ 1.075726] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.075730] software IO TLB [mem 0xc6dc5000-0xcadc5000] (64MB) mapped at [00000000d6850e58-000000003fd936a0] [ 1.075972] Scanning for low memory corruption every 60 seconds [ 1.076561] Initialise system trusted keyrings [ 1.076569] Key type blacklist registered [ 1.076605] workingset: timestamp_bits=36 max_order=20 bucket_order=0 [ 1.077631] zbud: loaded [ 1.078088] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.078210] fuse init (API version 7.26) [ 1.079237] Key type asymmetric registered [ 1.079238] Asymmetric key parser 'x509' registered [ 1.079270] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.079302] io scheduler noop registered [ 1.079303] io scheduler deadline registered [ 1.079347] io scheduler cfq registered (default) [ 1.080000] efifb: probing for efifb [ 1.080030] efifb: framebuffer at 0xe0000000, using 4160k, total 4160k [ 1.080031] efifb: mode is 1366x768x32, linelength=5504, pages=1 [ 1.080032] efifb: scrolling: redraw [ 1.080034] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.080129] Console: switching to colour frame buffer device 170x48 [ 1.080148] fb0: EFI VGA frame buffer device [ 1.080157] intel_idle: MWAIT substates: 0x11142120 [ 1.080158] intel_idle: v0.4.1 model 0x45 [ 1.080343] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.080476] ACPI: AC Adapter [AC] (off-line) [ 1.080537] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 1.080557] ACPI: Lid Switch [LID0] [ 1.080588] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 1.080596] ACPI: Power Button [PWRB] [ 1.080622] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 1.080628] ACPI: Sleep Button [SBTN] [ 1.080656] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.080670] ACPI: Power Button [PWRF] [ 1.094414] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 1.097658] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.097659] ACPI: Thermal Zone [THM] (40 C) [ 1.097812] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.099431] Linux agpgart interface v0.103 [ 1.100717] loop: module loaded [ 1.100867] libphy: Fixed MDIO Bus: probed [ 1.100868] tun: Universal TUN/TAP device driver, 1.6 [ 1.100894] PPP generic driver version 2.4.2 [ 1.100926] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.100928] ehci-pci: EHCI PCI platform driver [ 1.101047] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.101052] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 1.101062] ehci-pci 0000:00:1d.0: debug port 2 [ 1.104964] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.104974] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e1b000 [ 1.120019] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.120071] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.120073] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.120075] usb usb1: Product: EHCI Host Controller [ 1.120077] usb usb1: Manufacturer: Linux 4.15.0-23-generic ehci_hcd [ 1.120079] usb usb1: SerialNumber: 0000:00:1d.0 [ 1.120601] hub 1-0:1.0: USB hub found [ 1.120607] hub 1-0:1.0: 2 ports detected [ 1.121798] ehci-platform: EHCI generic platform driver [ 1.121811] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.121815] ohci-pci: OHCI PCI platform driver [ 1.121824] ohci-platform: OHCI generic platform driver [ 1.121832] uhci_hcd: USB Universal Host Controller Interface driver [ 1.122163] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.122170] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.123234] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810 [ 1.123239] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.123354] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.123355] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.123357] usb usb2: Product: xHCI Host Controller [ 1.123358] usb usb2: Manufacturer: Linux 4.15.0-23-generic xhci-hcd [ 1.123360] usb usb2: SerialNumber: 0000:00:14.0 [ 1.123487] hub 2-0:1.0: USB hub found [ 1.123497] hub 2-0:1.0: 9 ports detected [ 1.125202] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.125206] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.125231] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.125233] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.125234] usb usb3: Product: xHCI Host Controller [ 1.125235] usb usb3: Manufacturer: Linux 4.15.0-23-generic xhci-hcd [ 1.125236] usb usb3: SerialNumber: 0000:00:14.0 [ 1.125315] hub 3-0:1.0: USB hub found [ 1.125321] hub 3-0:1.0: 4 ports detected [ 1.125716] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.125717] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.127197] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.127271] mousedev: PS/2 mouse device common for all mice [ 1.127474] rtc_cmos 00:02: RTC can wake from S4 [ 1.127591] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.127615] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.127622] i2c /dev entries driver [ 1.127712] device-mapper: uevent: version 1.0.3 [ 1.127759] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 1.127766] intel_pstate: Intel P-state driver initializing [ 1.127893] ledtrig-cpu: registered to indicate activity on CPUs [ 1.127895] EFI Variables Facility v0.08 2004-May-17 [ 1.131954] NET: Registered protocol family 10 [ 1.132718] ACPI: Battery Slot [BAT0] (battery present) [ 1.137063] Segment Routing with IPv6 [ 1.137083] NET: Registered protocol family 17 [ 1.137129] Key type dns_resolver registered [ 1.137375] RAS: Correctable Errors collector initialized. [ 1.137403] microcode: sig=0x40651, pf=0x40, revision=0x23 [ 1.137446] microcode: Microcode Update Driver: v2.2. [ 1.137455] sched_clock: Marking stable (1137442913, 0)->(1121182998, 16259915) [ 1.137621] registered taskstats version 1 [ 1.137629] Loading compiled-in X.509 certificates [ 1.139924] Loaded X.509 cert 'Build time autogenerated kernel key: d77482c25b833df502ed38a87c5d7f330fdff3cb' [ 1.140130] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring [ 1.140153] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring [ 1.140249] Couldn't get size: 0x800000000000000e [ 1.140251] MODSIGN: Couldn't get UEFI MokListRT [ 1.140578] zswap: loaded using pool lzo/zbud [ 1.143772] Key type big_key registered [ 1.143775] Key type trusted registered [ 1.145228] Key type encrypted registered [ 1.145231] AppArmor: AppArmor sha1 policy hashing enabled [ 1.145233] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 1.145257] evm: HMAC attrs: 0x1 [ 1.145645] Magic number: 6:756:608 [ 1.145757] rtc_cmos 00:02: setting system clock to 2018-06-29 00:36:57 UTC (1530232617) [ 1.145839] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.145839] EDD information not available. [ 1.148358] Freeing unused kernel memory: 2408K [ 1.150736] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.172116] Write protecting the kernel read-only data: 20480k [ 1.172728] Freeing unused kernel memory: 2008K [ 1.177037] Freeing unused kernel memory: 1904K [ 1.182673] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.182674] x86/mm: Checking user space page tables [ 1.188217] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.265090] hidraw: raw HID events driver (C) Jiri Kosina [ 1.288124] i2c_hid i2c-DLL0651:00: i2c-DLL0651:00 supply vdd not found, using dummy regulator [ 1.295116] ahci 0000:00:1f.2: version 3.0 [ 1.295761] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found [ 1.299117] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.299126] r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.299590] r8169 0000:07:00.0 eth0: RTL8106e at 0x000000002901e8a3, 74:e6:e2:40:ad:af, XID 04900000 IRQ 42 [ 1.305435] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode [ 1.305439] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 1.312647] scsi host0: ahci [ 1.313084] scsi host1: ahci [ 1.313205] scsi host2: ahci [ 1.313554] scsi host3: ahci [ 1.313613] ata1: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a100 irq 41 [ 1.313616] ata2: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a180 irq 41 [ 1.313617] ata3: DUMMY [ 1.313618] ata4: DUMMY [ 1.316609] r8169 0000:07:00.0 enp7s0: renamed from eth0 [ 1.317365] media: Linux media interface: v0.10 [ 1.322132] Linux video capture interface: v2.00 [ 1.338187] [drm] Memory usable by graphics device = 2048M [ 1.338190] checking generic (e0000000 410000) vs hw (e0000000 10000000) [ 1.338190] fb: switching to inteldrmfb from EFI VGA [ 1.338214] Console: switching to colour dummy device 80x25 [ 1.338307] [drm] Replacing VGA console driver [ 1.344074] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.344075] [drm] Driver supports precise vblank timestamp query. [ 1.346113] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.354709] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0 [ 1.356543] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.356901] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 1.372779] fbcon: inteldrmfb (fb0) is primary device [ 1.372839] Console: switching to colour frame buffer device 170x48 [ 1.372863] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.394023] rmi4_f01 rmi4-00.fn01: found RMI device, manufacturer: Synaptics, product: s3203, fw id: 1567123 [ 1.456061] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.476494] input: Synaptics s3203 as /devices/pci0000:00/INT33C3:00/i2c-1/i2c-DLL0651:00/0018:06CB:2985.0001/input/input5 [ 1.476645] hid-rmi 0018:06CB:2985.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL0651:00 06CB:2985] on i2c-DLL0651:00 [ 1.612477] usb 1-1: New USB device found, idVendor=8087, idProduct=8000 [ 1.612480] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.612835] hub 1-1:1.0: USB hub found [ 1.612893] hub 1-1:1.0: 8 ports detected [ 1.627589] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.627608] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.630466] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A1B0, max UDMA/100 [ 1.632791] ata2.00: configured for UDMA/100 [ 1.634007] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2BA30003, max UDMA/133 [ 1.634010] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.640423] ata1.00: configured for UDMA/133 [ 1.640686] scsi 0:0:0:0: Direct-Access ATA ST1000LM024 HN-M 0003 PQ: 0 ANSI: 5 [ 1.641181] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.641216] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.641220] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.641241] sd 0:0:0:0: [sda] Write Protect is off [ 1.641244] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.641287] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.643168] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GU90N A1B0 PQ: 0 ANSI: 5 [ 1.697492] sda: sda1 sda2 [ 1.697996] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.702272] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.702273] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.702409] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.702513] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.904033] usb 1-1.2: new low-speed USB device number 3 using ehci-pci [ 2.017476] usb 1-1.2: New USB device found, idVendor=276d, idProduct=1160 [ 2.017479] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.017481] usb 1-1.2: Product: G Mouse [ 2.017483] usb 1-1.2: Manufacturer: YSTEK [ 2.023537] usbcore: registered new interface driver usbhid [ 2.023539] usbhid: USB HID core driver [ 2.026041] input: YSTEK G Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:276D:1160.0002/input/input7 [ 2.026147] hid-generic 0003:276D:1160.0002: input,hidraw1: USB HID v1.10 Mouse [YSTEK G Mouse] on usb-0000:00:1d.0-1.2/input0 [ 2.076059] tsc: Refined TSC clocksource calibration: 1696.073 MHz [ 2.076069] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1872a9796f1, max_idle_ns: 440795212049 ns [ 2.096101] usb 1-1.5: new high-speed USB device number 4 using ehci-pci [ 2.209920] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 2.270690] usb 1-1.5: New USB device found, idVendor=0c45, idProduct=6a04 [ 2.270693] usb 1-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 2.270695] usb 1-1.5: Product: Integrated_Webcam_HD [ 2.270697] usb 1-1.5: Manufacturer: CNFDH85K541030000VH2 [ 2.356046] usb 1-1.6: new full-speed USB device number 5 using ehci-pci [ 2.465150] usb 1-1.6: New USB device found, idVendor=0cf3, idProduct=0036 [ 2.465153] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.544051] usb 1-1.8: new high-speed USB device number 6 using ehci-pci [ 2.652896] usb 1-1.8: New USB device found, idVendor=0bda, idProduct=0129 [ 2.652899] usb 1-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.652901] usb 1-1.8: Product: USB2.0-CRW [ 2.652902] usb 1-1.8: Manufacturer: Generic [ 2.652904] usb 1-1.8: SerialNumber: 20100201396000000 [ 3.100277] clocksource: Switched to clocksource tsc [ 3.630172] random: crng init done [ 3.631770] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.751785] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 3.768165] systemd[1]: Detected architecture x86-64. [ 3.783893] systemd[1]: Set hostname to . [ 6.175882] systemd[1]: Reached target Libvirt guests shutdown. [ 6.176151] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 6.176212] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.176387] systemd[1]: Created slice User and Session Slice. [ 6.176412] systemd[1]: Reached target Remote File Systems. [ 6.176535] systemd[1]: Created slice System Slice. [ 6.176613] systemd[1]: Listening on LVM2 metadata daemon socket. [ 7.042384] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 7.406147] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS [ 7.493673] systemd-journald[290]: Received request to flush runtime journal from PID 1 [ 8.067086] lp: driver loaded but no devices found [ 8.201480] ppdev: user-space parallel port driver [ 22.696474] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels [ 22.734218] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 22.761690] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 22.776881] Bluetooth: Core ver 2.22 [ 22.776900] NET: Registered protocol family 31 [ 22.776901] Bluetooth: HCI device and connection manager initialized [ 22.776906] Bluetooth: HCI socket layer initialized [ 22.776909] Bluetooth: L2CAP socket layer initialized [ 22.776915] Bluetooth: SCO socket layer initialized [ 22.784507] usbcore: registered new interface driver btusb [ 22.786748] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 22.826711] ath9k 0000:06:00.0: enabling device (0000 -> 0002) [ 22.826930] ath: phy0: WB335 1-ANT card detected [ 22.826932] ath: phy0: Set BT/WLAN RX diversity capability [ 22.833768] ath: phy0: Enable LNA combining [ 22.834874] ath: phy0: ASPM enabled: 0x42 [ 22.834876] ath: EEPROM regdomain: 0x60 [ 22.834877] ath: EEPROM indicates we should expect a direct regpair map [ 22.834879] ath: Country alpha2 being used: 00 [ 22.834880] ath: Regpair used: 0x60 [ 22.839037] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 22.839258] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 22.839322] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 22.839428] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 22.839998] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffb707c1100000, irq=18 [ 22.892534] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3234: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 22.892536] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 22.892538] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 22.892539] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 22.892540] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 22.892542] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x19 [ 22.892544] snd_hda_codec_realtek hdaudioC1D0: Headphone Mic=0x1a [ 22.892545] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 22.919558] dell-smbios A80593CE-A997-11DA-B012-B622A1EF5492: WMI SMBIOS userspace interface not supported(0), try upgrading to a newer BIOS [ 23.027760] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 23.027762] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 23.027763] RAPL PMU: hw unit of domain package 2^-14 Joules [ 23.027764] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 23.027765] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 23.040913] AVX2 version of gcm_enc/dec engaged. [ 23.040914] AES CTR mode by8 optimization enabled [ 23.077760] intel_rapl: Found RAPL domain package [ 23.077762] intel_rapl: Found RAPL domain core [ 23.077763] intel_rapl: Found RAPL domain uncore [ 23.077764] intel_rapl: Found RAPL domain dram [ 23.077766] intel_rapl: RAPL package 0 domain package locked by BIOS [ 23.077771] intel_rapl: RAPL package 0 domain dram locked by BIOS [ 23.353815] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input8 [ 23.401446] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9 [ 23.750193] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10 [ 23.750238] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11 [ 23.750279] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12 [ 23.750320] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13 [ 23.750359] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14 [ 23.772947] usbcore: registered new interface driver ath3k [ 23.839830] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 23.890278] usb 1-1.6: USB disconnect, device number 5 [ 24.055002] usbcore: registered new interface driver rtsx_usb [ 24.067198] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:6a04) [ 24.107369] uvcvideo 1-1.5:1.0: Entity type for entity Extension 4 was not initialized! [ 24.107372] uvcvideo 1-1.5:1.0: Entity type for entity Extension 3 was not initialized! [ 24.107374] uvcvideo 1-1.5:1.0: Entity type for entity Processing 2 was not initialized! [ 24.107376] uvcvideo 1-1.5:1.0: Entity type for entity Camera 1 was not initialized! [ 24.107460] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input15 [ 24.107530] usbcore: registered new interface driver uvcvideo [ 24.107530] USB Video Class driver (1.1.1) [ 24.124038] usb 1-1.6: new full-speed USB device number 7 using ehci-pci [ 28.490092] ath9k 0000:06:00.0 wlp6s0: renamed from wlan0 [ 29.232065] usb 1-1.6: device descriptor read/64, error -110 [ 29.555116] audit: type=1400 audit(1530232645.902:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1005 comm="apparmor_parser" [ 29.555121] audit: type=1400 audit(1530232645.902:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1005 comm="apparmor_parser" [ 29.555124] audit: type=1400 audit(1530232645.902:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1005 comm="apparmor_parser" [ 29.555363] audit: type=1400 audit(1530232645.902:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1001 comm="apparmor_parser" [ 29.555366] audit: type=1400 audit(1530232645.902:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1001 comm="apparmor_parser" [ 29.555369] audit: type=1400 audit(1530232645.902:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1001 comm="apparmor_parser" [ 29.555372] audit: type=1400 audit(1530232645.902:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1001 comm="apparmor_parser" [ 29.556775] audit: type=1400 audit(1530232645.906:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=1006 comm="apparmor_parser" [ 29.556872] audit: type=1400 audit(1530232645.906:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1007 comm="apparmor_parser" [ 29.556875] audit: type=1400 audit(1530232645.906:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc//sanitized_helper" pid=1007 comm="apparmor_parser" [ 34.457227] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready [ 34.633174] usb 1-1.6: New USB device found, idVendor=0cf3, idProduct=0036 [ 34.633178] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 34.709219] r8169 0000:07:00.0 enp7s0: link down [ 34.709306] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready [ 34.733634] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 34.733636] Bluetooth: BNEP filters: protocol multicast [ 34.733640] Bluetooth: BNEP socket layer initialized [ 34.747068] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready [ 34.761280] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready [ 34.830612] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready [ 35.915620] wlp6s0: authenticate with c0:56:27:27:93:cd [ 35.927392] wlp6s0: send auth to c0:56:27:27:93:cd (try 1/3) [ 35.929328] wlp6s0: authenticated [ 35.932070] wlp6s0: associate with c0:56:27:27:93:cd (try 1/3) [ 35.935862] wlp6s0: RX AssocResp from c0:56:27:27:93:cd (capab=0x411 status=0 aid=2) [ 35.935942] wlp6s0: associated [ 35.975807] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready [ 37.772040] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 37.842482] Ebtables v2.0 registered [ 38.357112] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 38.358077] virbr0: port 1(virbr0-nic) entered blocking state [ 38.358080] virbr0: port 1(virbr0-nic) entered disabled state [ 38.358144] device virbr0-nic entered promiscuous mode [ 38.432305] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 38.818517] virbr0: port 1(virbr0-nic) entered blocking state [ 38.818522] virbr0: port 1(virbr0-nic) entered listening state [ 38.868717] virbr0: port 1(virbr0-nic) entered disabled state [ 41.827750] Bluetooth: RFCOMM TTY layer initialized [ 41.827758] Bluetooth: RFCOMM socket layer initialized [ 41.827762] Bluetooth: RFCOMM ver 1.11 [ 46.931846] rfkill: input handler disabled [ 1747.657916] wlp6s0: deauthenticating from c0:56:27:27:93:cd by local choice (Reason: 3=DEAUTH_LEAVING) [ 1751.233159] PM: suspend entry (deep) [ 1751.233162] PM: Syncing filesystems ... done. [ 1752.106554] Freezing user space processes ... (elapsed 0.181 seconds) done. [ 1752.288178] OOM killer disabled. [ 1752.288180] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 1752.289880] Suspending console(s) (use no_console_suspend to debug) [ 1752.305912] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1752.306008] sd 0:0:0:0: [sda] Stopping disk [ 1753.419604] ACPI: Preparing to enter system sleep state S3 [ 1753.431654] PM: Saving platform NVS memory [ 1753.431761] Disabling non-boot CPUs ... [ 1753.446268] IRQ 44: no longer affine to CPU1 [ 1753.447290] smpboot: CPU 1 is now offline [ 1753.470330] IRQ 42: no longer affine to CPU2 [ 1753.471365] smpboot: CPU 2 is now offline [ 1753.494325] IRQ 18: no longer affine to CPU3 [ 1753.495356] smpboot: CPU 3 is now offline [ 1753.498647] ACPI: Low-level resume complete [ 1753.498765] PM: Restoring platform NVS memory [ 1753.504543] Enabling non-boot CPUs ... [ 1753.504614] x86: Booting SMP configuration: [ 1753.504616] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 1753.508544] cache: parent cpu1 should not be sleeping [ 1753.508942] CPU1 is up [ 1753.508991] smpboot: Booting Node 0 Processor 2 APIC 0x1 [ 1753.509830] cache: parent cpu2 should not be sleeping [ 1753.510134] CPU2 is up [ 1753.510182] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 1753.510915] cache: parent cpu3 should not be sleeping [ 1753.511228] CPU3 is up [ 1753.517066] ACPI: Waking up from system sleep state S3 [ 1753.749950] ath: phy0: ASPM enabled: 0x42 [ 1753.751668] sd 0:0:0:0: [sda] Starting disk [ 1753.751701] ACPI: button: The lid device is not compliant to SW_LID. [ 1753.934694] r8169 0000:07:00.0 enp7s0: link down [ 1754.064443] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1754.068685] ata2.00: configured for UDMA/100 [ 1754.193357] usb 1-1.2: reset low-speed USB device number 3 using ehci-pci [ 1754.569350] usb 1-1.8: reset high-speed USB device number 6 using ehci-pci [ 1754.757357] usb 1-1.6: reset full-speed USB device number 7 using ehci-pci [ 1754.865695] usb 1-1.6: device firmware changed [ 1754.945327] usb 1-1.5: reset high-speed USB device number 4 using ehci-pci [ 1755.124513] OOM killer enabled. [ 1755.124515] Restarting tasks ... [ 1755.132354] pci_bus 0000:04: Allocating resources [ 1755.132368] pcieport 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 1755.132372] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000 [ 1755.132375] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000 [ 1755.132381] pci_bus 0000:06: Allocating resources [ 1755.132397] pcieport 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000 [ 1755.132400] pcieport 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000 [ 1755.132406] pci_bus 0000:07: Allocating resources [ 1755.132430] pcieport 0000:00:1c.0: BAR 14: assigned [mem 0xdf200000-0xdf3fffff] [ 1755.132440] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xdf400000-0xdf5fffff 64bit pref] [ 1755.132449] pcieport 0000:00:1c.2: BAR 15: assigned [mem 0xdf600000-0xdf7fffff 64bit pref] [ 1755.132453] pcieport 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 1755.132456] pcieport 0000:00:1c.2: BAR 13: assigned [io 0x3000-0x3fff] [ 1755.133181] pci_bus 0000:04: Allocating resources [ 1755.133193] pci_bus 0000:06: Allocating resources [ 1755.133211] pci_bus 0000:07: Allocating resources [ 1755.134868] usb 1-1.6: USB disconnect, device number 7 [ 1755.143710] done. [ 1755.190980] PM: suspend exit [ 1755.213291] usb 1-1.6: new full-speed USB device number 8 using ehci-pci [ 1755.322749] usb 1-1.6: New USB device found, idVendor=0cf3, idProduct=0036 [ 1755.322757] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1755.543755] usb 1-1.6: USB disconnect, device number 8 [ 1755.773303] usb 1-1.6: new full-speed USB device number 9 using ehci-pci [ 1755.985345] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1755.997965] ata1.00: configured for UDMA/133 [ 1756.235878] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready [ 1756.418413] r8169 0000:07:00.0 enp7s0: link down [ 1756.418480] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready [ 1756.419500] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready [ 1756.435032] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready [ 1756.499025] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready [ 1757.595006] wlp6s0: authenticate with c0:56:27:27:93:cd [ 1757.606738] wlp6s0: send auth to c0:56:27:27:93:cd (try 1/3) [ 1757.614168] wlp6s0: authenticated [ 1757.621288] wlp6s0: associate with c0:56:27:27:93:cd (try 1/3) [ 1757.627615] wlp6s0: RX AssocResp from c0:56:27:27:93:cd (capab=0x411 status=0 aid=2) [ 1757.627725] wlp6s0: associated [ 1757.650879] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready [ 1757.807339] atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0). [ 1757.807342] atkbd serio0: Use 'setkeycodes e00d ' to make it known. [ 1760.889226] usb 1-1.6: device descriptor read/64, error -110 [ 1771.414262] usb 1-1.6: New USB device found, idVendor=0cf3, idProduct=0036 [ 1771.414268] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 7646.680414] xhci_hcd 0000:00:14.0: Root hub is not suspended [ 7646.915841] usb 2-1: new low-speed USB device number 2 using xhci_hcd [ 7647.043961] usb 2-1: device descriptor read/64, error -71 [ 7647.279886] usb 2-1: device descriptor read/64, error -71 [ 7647.515821] usb 2-1: new low-speed USB device number 3 using xhci_hcd [ 7647.643862] usb 2-1: device descriptor read/64, error -71 [ 7647.879881] usb 2-1: device descriptor read/64, error -71 [ 7647.987887] usb usb2-port1: attempt power cycle [ 7648.639787] usb 2-1: new low-speed USB device number 4 using xhci_hcd [ 7648.640295] usb 2-1: Device not responding to setup address. [ 7648.848285] usb 2-1: Device not responding to setup address. [ 7649.055775] usb 2-1: device not accepting address 4, error -71 [ 7649.183674] usb 2-1: new low-speed USB device number 5 using xhci_hcd [ 7649.184078] usb 2-1: Device not responding to setup address. [ 7649.392249] usb 2-1: Device not responding to setup address. [ 7649.599772] usb 2-1: device not accepting address 5, error -71 [ 7649.599858] usb usb2-port1: unable to enumerate USB device

[ 7925.963020] xhci_hcd 0000:00:14.0: Root hub is not suspended [ 7927.242716] xhci_hcd 0000:00:14.0: Root hub is not suspended [ 7927.478320] usb 2-1: new low-speed USB device number 6 using xhci_hcd [ 7927.606316] usb 2-1: device descriptor read/64, error -71 [ 7927.842355] usb 2-1: device descriptor read/64, error -71 [ 7928.078258] usb 2-1: new low-speed USB device number 7 using xhci_hcd [ 7928.206211] usb 2-1: device descriptor read/64, error -71 [ 7928.442329] usb 2-1: device descriptor read/64, error -71 [ 7928.550251] usb usb2-port1: attempt power cycle [ 7929.202165] usb 2-1: new low-speed USB device number 8 using xhci_hcd [ 7929.202551] usb 2-1: Device not responding to setup address. [ 7929.410582] usb 2-1: Device not responding to setup address. [ 7929.618188] usb 2-1: device not accepting address 8, error -71 [ 7929.746192] usb 2-1: new low-speed USB device number 9 using xhci_hcd [ 7929.746585] usb 2-1: Device not responding to setup address. [ 7929.954639] usb 2-1: Device not responding to setup address. [ 7930.166139] usb 2-1: device not accepting address 9, error -71 [ 7930.166191] usb usb2-port1: unable to enumerate USB device [ 7938.994615] xhci_hcd 0000:00:14.0: Root hub is not suspended [ 7941.082535] xhci_hcd 0000:00:14.0: Root hub is not suspended [ 7941.317822] usb 2-1: new low-speed USB device number 10 using xhci_hcd [ 7941.445880] usb 2-1: device descriptor read/64, error -71 [ 7941.681872] usb 2-1: device descriptor read/64, error -71 [ 7941.917767] usb 2-1: new low-speed USB device number 11 using xhci_hcd [ 7942.045871] usb 2-1: device descriptor read/64, error -71 [ 7942.281830] usb 2-1: device descriptor read/64, error -71 [ 7942.389886] usb usb2-port1: attempt power cycle [ 7943.041790] usb 2-1: new low-speed USB device number 12 using xhci_hcd [ 7943.042381] usb 2-1: Device not responding to setup address. [ 7943.250363] usb 2-1: Device not responding to setup address. [ 7943.457776] usb 2-1: device not accepting address 12, error -71 [ 7943.585808] usb 2-1: new low-speed USB device number 13 using xhci_hcd [ 7943.586372] usb 2-1: Device not responding to setup address. [ 7943.794231] usb 2-1: Device not responding to setup address. [ 7944.001752] usb 2-1: device not accepting address 13, error -71 [ 7944.001834] usb usb2-port1: unable to enumerate USB device [ 7965.333428] xhci_hcd 0000:00:14.0: Root hub is not suspended [ 7967.109555] xhci_hcd 0000:00:14.0: Root hub is not suspended [ 7967.344931] usb 2-1: new low-speed USB device number 14 using xhci_hcd [ 7967.472973] usb 2-1: device descriptor read/64, error -71 [ 7967.708978] usb 2-1: device descriptor read/64, error -71 [ 7967.944928] usb 2-1: new low-speed USB device number 15 using xhci_hcd [ 7968.072952] usb 2-1: device descriptor read/64, error -71 [ 7968.308907] usb 2-1: device descriptor read/64, error -71 [ 7968.417013] usb usb2-port1: attempt power cycle [ 7969.068883] usb 2-1: new low-speed USB device number 16 using xhci_hcd [ 7969.069379] usb 2-1: Device not responding to setup address. [ 7969.277402] usb 2-1: Device not responding to setup address. [ 7969.484869] usb 2-1: device not accepting address 16, error -71 [ 7969.612922] usb 2-1: new low-speed USB device number 17 using xhci_hcd [ 7969.613538] usb 2-1: Device not responding to setup address. [ 7969.821381] usb 2-1: Device not responding to setup address. [ 7970.028836] usb 2-1: device not accepting address 17, error -71 [ 7970.028915] usb usb2-port1: unable to enumerate USB device

Lvaskz commented 6 years ago

I'm going to close this. The tablet is damaged in some of its cables and is no longer recognized in mint 18.3. However, I would like to know if the new Wacom Intous S, is supported?

jigpu commented 6 years ago

Hmm, yeah, error -71 doesn't look good for a USB device...

All three of the recent generations of "Intuos S" tablets should be supported. The latest generation might require the use of our "input-wacom" driver for your distribution's kernel, but the earlier two generations should work out of the box.

Lvaskz commented 6 years ago

Ok, thanks for all your help.

linuxwacom / wacom-hid-descriptors

add support for Wacom Cintiq 15x PL-550 #30