请问你使用这个nginx.tmpl没有报错吗？

模板文件，麻烦看看有啥不一样
{{ $all := . }}
{{ $servers := .Servers }}
{{ $cfg := .Cfg }}
{{ $IsIPV6Enabled := .IsIPV6Enabled }}
{{ $healthzURI := .HealthzURI }}
{{ $backends := .Backends }}
{{ $proxyHeaders := .ProxySetHeaders }}
{{ $addHeaders := .AddHeaders }}

# Configuration checksum: {{ $all.Cfg.Checksum }}

# setup custom paths that do not require root access
pid {{ .PID }};

{{ if $cfg.UseGeoIP2 }}
load_module /etc/nginx/modules/ngx_http_geoip2_module.so;
{{ end }}

{{ if (shouldLoadModSecurityModule $cfg $servers) }}
load_module /etc/nginx/modules/ngx_http_modsecurity_module.so;
{{ end }}

{{ if (shouldLoadOpentracingModule $cfg $servers) }}
load_module /etc/nginx/modules/ngx_http_opentracing_module.so;
{{ end }}

daemon off;

worker_processes {{ $cfg.WorkerProcesses }};
{{ if gt (len $cfg.WorkerCPUAffinity) 0 }}
worker_cpu_affinity {{ $cfg.WorkerCPUAffinity }};
{{ end }}

worker_rlimit_nofile {{ $cfg.MaxWorkerOpenFiles }};

{{/* http://nginx.org/en/docs/ngx_core_module.html#worker_shutdown_timeout */}}
{{/* avoid waiting too long during a reload */}}
worker_shutdown_timeout {{ $cfg.WorkerShutdownTimeout }} ;

{{ if not (empty $cfg.MainSnippet) }}
{{ $cfg.MainSnippet }}
{{ end }}

# Skywalking ENV
env SW_SERVICE_NAME;
env SW_SERVICE_INSTANCE_NAME;
env SW_BACKEND_SERVERS;

events {
    multi_accept        {{ if $cfg.EnableMultiAccept }}on{{ else }}off{{ end }};
    worker_connections  {{ $cfg.MaxWorkerConnections }};
    use                 epoll;
}

http {
    lua_package_path "/etc/nginx/lua/?.lua;/etc/nginx/lua/skywalking/?.lua;;";

    lua_shared_dict tracing_buffer 100m;

    {{ buildLuaSharedDictionaries $cfg $servers }}

    init_by_lua_block {
        collectgarbage("collect")

        -- init modules
        local ok, res

        ok, res = pcall(require, "lua_ingress")
        if not ok then
          error("require failed: " .. tostring(res))
        else
          lua_ingress = res
          lua_ingress.set_config({{ configForLua $all }})
        end

        ok, res = pcall(require, "configuration")
        if not ok then
          error("require failed: " .. tostring(res))
        else
          configuration = res
        end

        ok, res = pcall(require, "balancer")
        if not ok then
          error("require failed: " .. tostring(res))
        else
          balancer = res
        end

        {{ if $all.EnableMetrics }}
        ok, res = pcall(require, "monitor")
        if not ok then
          error("require failed: " .. tostring(res))
        else
          monitor = res
        end
        {{ end }}

        ok, res = pcall(require, "certificate")
        if not ok then
          error("require failed: " .. tostring(res))
        else
          certificate = res
          certificate.is_ocsp_stapling_enabled = {{ $cfg.EnableOCSP }}
        end

        ok, res = pcall(require, "plugins")
        if not ok then
          error("require failed: " .. tostring(res))
        else
          plugins = res
        end
        -- load all plugins that'll be used here
        plugins.init({ {{ range  $idx, $plugin := $cfg.Plugins }}{{ if $idx }},{{ end }}{{ $plugin | quote }}{{ end }} })
    }

    init_worker_by_lua_block {
        lua_ingress.init_worker()
        balancer.init_worker()
        {{ if $all.EnableMetrics }}
        monitor.init_worker({{ $all.MonitorMaxBatchSize }})
        {{ end }}

        plugins.run()

        -- Skywalking
        local metadata_buffer = ngx.shared.tracing_buffer
        metadata_buffer:set('serviceName', os.getenv("SW_SERVICE_NAME"))
        metadata_buffer:set('serviceInstanceName', os.getenv("SW_SERVICE_INSTANCE_NAME"))
        require("client"):startBackendTimer(os.getenv("SW_BACKEND_SERVERS"))
    }

    {{/* Enable the real_ip module only if we use either X-Forwarded headers or Proxy Protocol. */}}
    {{/* we use the value of the real IP for the geo_ip module */}}
    {{ if or $cfg.UseForwardedHeaders $cfg.UseProxyProtocol }}
    {{ if $cfg.UseProxyProtocol }}
    real_ip_header      proxy_protocol;
    {{ else }}
    real_ip_header      {{ $cfg.ForwardedForHeader }};
    {{ end }}

    real_ip_recursive   on;
    {{ range $trusted_ip := $cfg.ProxyRealIPCIDR }}
    set_real_ip_from    {{ $trusted_ip }};
    {{ end }}
    {{ end }}

    {{ if $all.Cfg.EnableModsecurity }}
    modsecurity on;

    modsecurity_rules_file /etc/nginx/modsecurity/modsecurity.conf;

    {{ if $all.Cfg.EnableOWASPCoreRules }}
    modsecurity_rules_file /etc/nginx/owasp-modsecurity-crs/nginx-modsecurity.conf;
    {{ else if (not (empty $all.Cfg.ModsecuritySnippet)) }}
    modsecurity_rules '
      {{ $all.Cfg.ModsecuritySnippet }}
    ';
    {{ end }}

    {{ end }}

    {{ if $cfg.UseGeoIP }}
    {{/* databases used to determine the country depending on the client IP address */}}
    {{/* http://nginx.org/en/docs/http/ngx_http_geoip_module.html */}}
    {{/* this is require to calculate traffic for individual country using GeoIP in the status page */}}
    geoip_country       /etc/nginx/geoip/GeoIP.dat;
    geoip_city          /etc/nginx/geoip/GeoLiteCity.dat;
    geoip_org           /etc/nginx/geoip/GeoIPASNum.dat;
    geoip_proxy_recursive on;
    {{ end }}

    {{ if $cfg.UseGeoIP2 }}
    # https://github.com/leev/ngx_http_geoip2_module#example-usage

    {{ range $index, $file := $all.MaxmindEditionFiles }}
    {{ if eq $file "GeoLite2-City.mmdb" }}
    geoip2 /etc/nginx/geoip/GeoLite2-City.mmdb {
        $geoip2_city_country_code source=$remote_addr country iso_code;
        $geoip2_city_country_name source=$remote_addr country names en;
        $geoip2_city source=$remote_addr city names en;
        $geoip2_postal_code source=$remote_addr postal code;
        $geoip2_dma_code source=$remote_addr location metro_code;
        $geoip2_latitude source=$remote_addr location latitude;
        $geoip2_longitude source=$remote_addr location longitude;
        $geoip2_time_zone source=$remote_addr location time_zone;
        $geoip2_region_code source=$remote_addr subdivisions 0 iso_code;
        $geoip2_region_name source=$remote_addr subdivisions 0 names en;
    }
    {{ end }}

    {{ if eq $file "GeoIP2-City.mmdb" }}
    geoip2 /etc/nginx/geoip/GeoIP2-City.mmdb {
        $geoip2_city_country_code source=$remote_addr country iso_code;
        $geoip2_city_country_name source=$remote_addr country names en;
        $geoip2_city source=$remote_addr city names en;
        $geoip2_postal_code source=$remote_addr postal code;
        $geoip2_dma_code source=$remote_addr location metro_code;
        $geoip2_latitude source=$remote_addr location latitude;
        $geoip2_longitude source=$remote_addr location longitude;
        $geoip2_time_zone source=$remote_addr location time_zone;
        $geoip2_region_code source=$remote_addr subdivisions 0 iso_code;
        $geoip2_region_name source=$remote_addr subdivisions 0 names en;
    }
    {{ end }}

    {{ if eq $file "GeoLite2-ASN.mmdb" }}
    geoip2 /etc/nginx/geoip/GeoLite2-ASN.mmdb {
        $geoip2_asn source=$remote_addr autonomous_system_number;
        $geoip2_org source=$remote_addr autonomous_system_organization;
    }
    {{ end }}

    {{ if eq $file "GeoIP2-ASN.mmdb" }}
    geoip2 /etc/nginx/geoip/GeoIP2-ASN.mmdb {
        $geoip2_asn source=$remote_addr autonomous_system_number;
        $geoip2_org source=$remote_addr autonomous_system_organization;
    }
    {{ end }}

    {{ if eq $file "GeoIP2-ISP.mmdb" }}
    geoip2 /etc/nginx/geoip/GeoIP2-ISP.mmdb {
        $geoip2_isp isp;
        $geoip2_isp_org organization;
    }
    {{ end }}

    {{ if eq $file "GeoIP2-Connection-Type.mmdb" }}
    geoip2 /etc/nginx/geoip/GeoIP2-Connection-Type.mmdb {
        $geoip2_connection_type connection_type;
    }
    {{ end }}

    {{ if eq $file "GeoIP2-Anonymous-IP.mmdb" }}
    geoip2 /etc/nginx/geoip/GeoIP2-Anonymous-IP.mmdb {
        $geoip2_is_anon source=$remote_addr is_anonymous;
        $geoip2_is_hosting_provider source=$remote_addr is_hosting_provider;
        $geoip2_is_public_proxy source=$remote_addr is_public_proxy;
    }
    {{ end }}

    {{ end }}

    {{ end }}

    aio                 threads;
    aio_write           on;

    tcp_nopush          on;
    tcp_nodelay         on;

    log_subrequest      on;

    reset_timedout_connection on;

    keepalive_timeout  {{ $cfg.KeepAlive }}s;
    keepalive_requests {{ $cfg.KeepAliveRequests }};

    client_body_temp_path           /tmp/client-body;
    fastcgi_temp_path               /tmp/fastcgi-temp;
    proxy_temp_path                 /tmp/proxy-temp;
    ajp_temp_path                   /tmp/ajp-temp;

    client_header_buffer_size       {{ $cfg.ClientHeaderBufferSize }};
    client_header_timeout           {{ $cfg.ClientHeaderTimeout }}s;
    large_client_header_buffers     {{ $cfg.LargeClientHeaderBuffers }};
    client_body_buffer_size         {{ $cfg.ClientBodyBufferSize }};
    client_body_timeout             {{ $cfg.ClientBodyTimeout }}s;

    http2_max_field_size            {{ $cfg.HTTP2MaxFieldSize }};
    http2_max_header_size           {{ $cfg.HTTP2MaxHeaderSize }};
    http2_max_requests              {{ $cfg.HTTP2MaxRequests }};
    http2_max_concurrent_streams    {{ $cfg.HTTP2MaxConcurrentStreams }};

    types_hash_max_size             2048;
    server_names_hash_max_size      {{ $cfg.ServerNameHashMaxSize }};
    server_names_hash_bucket_size   {{ $cfg.ServerNameHashBucketSize }};
    map_hash_bucket_size            {{ $cfg.MapHashBucketSize }};

    proxy_headers_hash_max_size     {{ $cfg.ProxyHeadersHashMaxSize }};
    proxy_headers_hash_bucket_size  {{ $cfg.ProxyHeadersHashBucketSize }};

    variables_hash_bucket_size      {{ $cfg.VariablesHashBucketSize }};
    variables_hash_max_size         {{ $cfg.VariablesHashMaxSize }};

    underscores_in_headers          {{ if $cfg.EnableUnderscoresInHeaders }}on{{ else }}off{{ end }};
    ignore_invalid_headers          {{ if $cfg.IgnoreInvalidHeaders }}on{{ else }}off{{ end }};

    limit_req_status                {{ $cfg.LimitReqStatusCode }};
    limit_conn_status               {{ $cfg.LimitConnStatusCode }};

    {{ buildOpentracing $cfg $servers }}

    include /etc/nginx/mime.types;
    default_type {{ $cfg.DefaultType }};

    {{ if $cfg.EnableBrotli }}
    brotli on;
    brotli_comp_level {{ $cfg.BrotliLevel }};
    brotli_types {{ $cfg.BrotliTypes }};
    {{ end }}

    {{ if $cfg.UseGzip }}
    gzip on;
    gzip_comp_level {{ $cfg.GzipLevel }};
    gzip_http_version 1.1;
    gzip_min_length {{ $cfg.GzipMinLength}};
    gzip_types {{ $cfg.GzipTypes }};
    gzip_proxied any;
    gzip_vary on;
    {{ end }}

    # Custom headers for response
    {{ range $k, $v := $addHeaders }}
    more_set_headers {{ printf "%s: %s" $k $v | quote }};
    {{ end }}

    server_tokens {{ if $cfg.ShowServerTokens }}on{{ else }}off{{ end }};
    {{ if not $cfg.ShowServerTokens }}
    more_clear_headers Server;
    {{ end }}

    # disable warnings
    uninitialized_variable_warn off;

    # Additional available variables:
    # $namespace
    # $ingress_name
    # $service_name
    # $service_port
    log_format upstreaminfo {{ if $cfg.LogFormatEscapeJSON }}escape=json {{ end }}'{{ $cfg.LogFormatUpstream }}';

    {{/* map urls that should not appear in access.log */}}
    {{/* http://nginx.org/en/docs/http/ngx_http_log_module.html#access_log */}}
    map $request_uri $loggable {
        {{ range $reqUri := $cfg.SkipAccessLogURLs }}
        {{ $reqUri }} 0;{{ end }}
        default 1;
    }

    {{ if $cfg.DisableAccessLog }}
    access_log off;
    {{ else }}
    {{ if $cfg.EnableSyslog }}
    access_log syslog:server={{ $cfg.SyslogHost }}:{{ $cfg.SyslogPort }} upstreaminfo if=$loggable;
    {{ else }}
    access_log {{ or $cfg.HttpAccessLogPath $cfg.AccessLogPath }} upstreaminfo {{ $cfg.AccessLogParams }} if=$loggable;
    {{ end }}
    {{ end }}

    {{ if $cfg.EnableSyslog }}
    error_log syslog:server={{ $cfg.SyslogHost }}:{{ $cfg.SyslogPort }} {{ $cfg.ErrorLogLevel }};
    {{ else }}
    error_log  {{ $cfg.ErrorLogPath }} {{ $cfg.ErrorLogLevel }};
    {{ end }}

    {{ buildResolvers $cfg.Resolver $cfg.DisableIpv6DNS }}

    # See https://www.nginx.com/blog/websocket-nginx
    map $http_upgrade $connection_upgrade {
        default          upgrade;
        {{ if (gt $cfg.UpstreamKeepaliveConnections 0) }}
        # See http://nginx.org/en/docs/http/ngx_http_upstream_module.html#keepalive
        ''               '';
        {{ else }}
        ''               close;
        {{ end }}
    }

    # Reverse proxies can detect if a client provides a X-Request-ID header, and pass it on to the backend server.
    # If no such header is provided, it can provide a random value.
    map $http_x_request_id $req_id {
        default   $http_x_request_id;
        {{ if $cfg.GenerateRequestID }}
        ""        $request_id;
        {{ end }}
    }

    {{ if and $cfg.UseForwardedHeaders $cfg.ComputeFullForwardedFor }}
    # We can't use $proxy_add_x_forwarded_for because the realip module
    # replaces the remote_addr too soon
    map $http_x_forwarded_for $full_x_forwarded_for {
        {{ if $all.Cfg.UseProxyProtocol }}
        default          "$http_x_forwarded_for, $proxy_protocol_addr";
        ''               "$proxy_protocol_addr";
        {{ else }}
        default          "$http_x_forwarded_for, $realip_remote_addr";
        ''               "$realip_remote_addr";
        {{ end}}
    }

    {{ end }}

    {{ if $cfg.UseForwardedHeaders }}
    map $http_x_forwarded_proto $full_x_forwarded_proto {
        default $http_x_forwarded_proto;
        "" $scheme;
    }

    {{ end }}

    # Create a variable that contains the literal $ character.
    # This works because the geo module will not resolve variables.
    geo $literal_dollar {
        default "$";
    }

    server_name_in_redirect off;
    port_in_redirect        off;

    ssl_protocols {{ $cfg.SSLProtocols }};

    ssl_early_data {{ if $cfg.SSLEarlyData }}on{{ else }}off{{ end }};

    # turn on session caching to drastically improve performance
    {{ if $cfg.SSLSessionCache }}
    ssl_session_cache builtin:1000 shared:SSL:{{ $cfg.SSLSessionCacheSize }};
    ssl_session_timeout {{ $cfg.SSLSessionTimeout }};
    {{ end }}

    # allow configuring ssl session tickets
    ssl_session_tickets {{ if $cfg.SSLSessionTickets }}on{{ else }}off{{ end }};

    {{ if not (empty $cfg.SSLSessionTicketKey ) }}
    ssl_session_ticket_key /etc/nginx/tickets.key;
    {{ end }}

    # slightly reduce the time-to-first-byte
    ssl_buffer_size {{ $cfg.SSLBufferSize }};

    {{ if not (empty $cfg.SSLCiphers) }}
    # allow configuring custom ssl ciphers
    ssl_ciphers '{{ $cfg.SSLCiphers }}';
    ssl_prefer_server_ciphers on;
    {{ end }}

    {{ if not (empty $cfg.SSLDHParam) }}
    # allow custom DH file http://nginx.org/en/docs/http/ngx_http_ssl_module.html#ssl_dhparam
    ssl_dhparam {{ $cfg.SSLDHParam }};
    {{ end }}

    ssl_ecdh_curve {{ $cfg.SSLECDHCurve }};

    # PEM sha: {{ $cfg.DefaultSSLCertificate.PemSHA }}
    ssl_certificate     {{ $cfg.DefaultSSLCertificate.PemFileName }};
    ssl_certificate_key {{ $cfg.DefaultSSLCertificate.PemFileName }};

    {{ if gt (len $cfg.CustomHTTPErrors) 0 }}
    proxy_intercept_errors on;
    {{ end }}

    {{ range $errCode := $cfg.CustomHTTPErrors }}
    error_page {{ $errCode }} = @custom_upstream-default-backend_{{ $errCode }};{{ end }}

    proxy_ssl_session_reuse on;

    {{ if $cfg.AllowBackendServerHeader }}
    proxy_pass_header Server;
    {{ end }}

    {{ range $header := $cfg.HideHeaders }}proxy_hide_header {{ $header }};
    {{ end }}

    {{ if not (empty $cfg.HTTPSnippet) }}
    # Custom code snippet configured in the configuration configmap
    {{ $cfg.HTTPSnippet }}
    {{ end }}

    upstream upstream_balancer {
        ### Attention!!!
        #
        # We no longer create "upstream" section for every backend.
        # Backends are handled dynamically using Lua. If you would like to debug
        # and see what backends ingress-nginx has in its memory you can
        # install our kubectl plugin https://kubernetes.github.io/ingress-nginx/kubectl-plugin.
        # Once you have the plugin you can use "kubectl ingress-nginx backends" command to
        # inspect current backends.
        #
        ###

        server 0.0.0.1; # placeholder

        balancer_by_lua_block {
          balancer.balance()
        }

        {{ if (gt $cfg.UpstreamKeepaliveConnections 0) }}
        keepalive {{ $cfg.UpstreamKeepaliveConnections }};

        keepalive_timeout  {{ $cfg.UpstreamKeepaliveTimeout }}s;
        keepalive_requests {{ $cfg.UpstreamKeepaliveRequests }};
        {{ end }}
    }

    {{ range $rl := (filterRateLimits $servers ) }}
    # Ratelimit {{ $rl.Name }}
    geo $remote_addr $whitelist_{{ $rl.ID }} {
        default 0;
        {{ range $ip := $rl.Whitelist }}
        {{ $ip }} 1;{{ end }}
    }

    # Ratelimit {{ $rl.Name }}
    map $whitelist_{{ $rl.ID }} $limit_{{ $rl.ID }} {
        0 {{ $cfg.LimitConnZoneVariable }};
        1 "";
    }
    {{ end }}

    {{/* build all the required rate limit zones. Each annotation requires a dedicated zone */}}
    {{/* 1MB -> 16 thousand 64-byte states or about 8 thousand 128-byte states */}}
    {{ range $zone := (buildRateLimitZones $servers) }}
    {{ $zone }}
    {{ end }}

    # Cache for internal auth checks
    proxy_cache_path /tmp/nginx-cache-auth levels=1:2 keys_zone=auth_cache:10m max_size=128m inactive=30m use_temp_path=off;

    # Global filters
    {{ range $ip := $cfg.BlockCIDRs }}deny {{ trimSpace $ip }};
    {{ end }}

    {{ if gt (len $cfg.BlockUserAgents) 0 }}
    map $http_user_agent $block_ua {
        default 0;

        {{ range $ua := $cfg.BlockUserAgents }}{{ trimSpace $ua }} 1;
        {{ end }}
    }
    {{ end }}

    {{ if gt (len $cfg.BlockReferers) 0 }}
    map $http_referer $block_ref {
        default 0;

        {{ range $ref := $cfg.BlockReferers }}{{ trimSpace $ref }} 1;
        {{ end }}
    }
    {{ end }}

    {{/* Build server redirects (from/to www) */}}
    {{ range $redirect := .RedirectServers }}
    ## start server {{ $redirect.From }}
    server {
        server_name {{ $redirect.From }};

        {{ buildHTTPListener  $all $redirect.From }}
        {{ buildHTTPSListener $all $redirect.From }}

        ssl_certificate_by_lua_block {
            certificate.call()
        }

        {{ if gt (len $cfg.BlockUserAgents) 0 }}
        if ($block_ua) {
           return 403;
        }
        {{ end }}
        {{ if gt (len $cfg.BlockReferers) 0 }}
        if ($block_ref) {
           return 403;
        }
        {{ end }}

        {{ if ne $all.ListenPorts.HTTPS 443 }}
        {{ $redirect_port := (printf ":%v" $all.ListenPorts.HTTPS) }}
        return {{ $all.Cfg.HTTPRedirectCode }} $scheme://{{ $redirect.To }}{{ $redirect_port }}$request_uri;
        {{ else }}
        return {{ $all.Cfg.HTTPRedirectCode }} $scheme://{{ $redirect.To }}$request_uri;
        {{ end }}
    }
    ## end server {{ $redirect.From }}
    {{ end }}

    {{ range $server := $servers }}

    ## start server {{ $server.Hostname }}
    server {
        server_name {{ $server.Hostname }} {{range $server.Aliases }}{{ . }} {{ end }};

        {{ if gt (len $cfg.BlockUserAgents) 0 }}
        if ($block_ua) {
           return 403;
        }
        {{ end }}
        {{ if gt (len $cfg.BlockReferers) 0 }}
        if ($block_ref) {
           return 403;
        }
        {{ end }}

        {{ template "SERVER" serverConfig $all $server }}

        {{ if not (empty $cfg.ServerSnippet) }}
        # Custom code snippet configured in the configuration configmap
        {{ $cfg.ServerSnippet }}
        {{ end }}

        {{ template "CUSTOM_ERRORS" (buildCustomErrorDeps "upstream-default-backend" $cfg.CustomHTTPErrors $all.EnableMetrics) }}
    }
    ## end server {{ $server.Hostname }}

    {{ end }}

    # backend for when default-backend-service is not configured or it does not have endpoints
    server {
        listen {{ $all.ListenPorts.Default }} default_server {{ if $all.Cfg.ReusePort }}reuseport{{ end }} backlog={{ $all.BacklogSize }};
        {{ if $IsIPV6Enabled }}listen [::]:{{ $all.ListenPorts.Default }} default_server {{ if $all.Cfg.ReusePort }}reuseport{{ end }} backlog={{ $all.BacklogSize }};{{ end }}
        set $proxy_upstream_name "internal";

        access_log off;

        location / {
          return 404;
        }
    }

    # default server, used for NGINX healthcheck and access to nginx stats
    server {
        listen 127.0.0.1:{{ .StatusPort }};
        set $proxy_upstream_name "internal";

        keepalive_timeout 0;
        gzip off;

        access_log off;

        {{ if $cfg.EnableOpentracing }}
        opentracing off;
        {{ end }}

        location {{ $healthzURI }} {
            return 200;
        }

        location /is-dynamic-lb-initialized {
            content_by_lua_block {
                local configuration = require("configuration")
                local backend_data = configuration.get_backends_data()
                if not backend_data then
                    ngx.exit(ngx.HTTP_INTERNAL_SERVER_ERROR)
                    return
                end

                ngx.say("OK")
                ngx.exit(ngx.HTTP_OK)
            }
        }

        location {{ .StatusPath }} {
            stub_status on;
        }

        location /configuration {
            client_max_body_size                    {{ luaConfigurationRequestBodySize $cfg }}m;
            client_body_buffer_size                 {{ luaConfigurationRequestBodySize $cfg }}m;
            proxy_buffering                         off;

            content_by_lua_block {
              configuration.call()
            }
        }

        location / {
            content_by_lua_block {
                ngx.exit(ngx.HTTP_NOT_FOUND)
            }
        }
    }
}

stream {
    lua_package_path "/etc/nginx/lua/?.lua;/etc/nginx/lua/vendor/?.lua;;";

    lua_shared_dict tcp_udp_configuration_data 5M;

    init_by_lua_block {
        collectgarbage("collect")

        -- init modules
        local ok, res

        ok, res = pcall(require, "configuration")
        if not ok then
          error("require failed: " .. tostring(res))
        else
          configuration = res
        end

        ok, res = pcall(require, "tcp_udp_configuration")
        if not ok then
          error("require failed: " .. tostring(res))
        else
          tcp_udp_configuration = res
        end

        ok, res = pcall(require, "tcp_udp_balancer")
        if not ok then
          error("require failed: " .. tostring(res))
        else
          tcp_udp_balancer = res
        end
    }

    init_worker_by_lua_block {
        tcp_udp_balancer.init_worker()
    }

    lua_add_variable $proxy_upstream_name;

    log_format log_stream '{{ $cfg.LogFormatStream }}';

    {{ if $cfg.DisableAccessLog }}
    access_log off;
    {{ else }}
    access_log {{ or $cfg.StreamAccessLogPath $cfg.AccessLogPath }} log_stream {{ $cfg.AccessLogParams }};
    {{ end }}

    error_log  {{ $cfg.ErrorLogPath }};

    upstream upstream_balancer {
        server 0.0.0.1:1234; # placeholder

        balancer_by_lua_block {
          tcp_udp_balancer.balance()
        }
    }

    server {
        listen 127.0.0.1:{{ .StreamPort }};

        access_log off;

        content_by_lua_block {
          tcp_udp_configuration.call()
        }
    }

    # TCP services
    {{ range $tcpServer := .TCPBackends }}
    server {
        preread_by_lua_block {
            ngx.var.proxy_upstream_name="tcp-{{ $tcpServer.Backend.Namespace }}-{{ $tcpServer.Backend.Name }}-{{ $tcpServer.Backend.Port }}";
        }

        {{ range $address := $all.Cfg.BindAddressIpv4 }}
        listen                  {{ $address }}:{{ $tcpServer.Port }}{{ if $tcpServer.Backend.ProxyProtocol.Decode }} proxy_protocol{{ end }};
        {{ else }}
        listen                  {{ $tcpServer.Port }}{{ if $tcpServer.Backend.ProxyProtocol.Decode }} proxy_protocol{{ end }};
        {{ end }}
        {{ if $IsIPV6Enabled }}
        {{ range $address := $all.Cfg.BindAddressIpv6 }}
        listen                  {{ $address }}:{{ $tcpServer.Port }}{{ if $tcpServer.Backend.ProxyProtocol.Decode }} proxy_protocol{{ end }};
        {{ else }}
        listen                  [::]:{{ $tcpServer.Port }}{{ if $tcpServer.Backend.ProxyProtocol.Decode }} proxy_protocol{{ end }};
        {{ end }}
        {{ end }}
        proxy_timeout           {{ $cfg.ProxyStreamTimeout }};
        proxy_pass              upstream_balancer;
        {{ if $tcpServer.Backend.ProxyProtocol.Encode }}
        proxy_protocol          on;
        {{ end }}
    }
    {{ end }}

    # UDP services
    {{ range $udpServer := .UDPBackends }}
    server {
        preread_by_lua_block {
            ngx.var.proxy_upstream_name="udp-{{ $udpServer.Backend.Namespace }}-{{ $udpServer.Backend.Name }}-{{ $udpServer.Backend.Port }}";
        }

        {{ range $address := $all.Cfg.BindAddressIpv4 }}
        listen                  {{ $address }}:{{ $udpServer.Port }} udp;
        {{ else }}
        listen                  {{ $udpServer.Port }} udp;
        {{ end }}
        {{ if $IsIPV6Enabled }}
        {{ range $address := $all.Cfg.BindAddressIpv6 }}
        listen                  {{ $address }}:{{ $udpServer.Port }} udp;
        {{ else }}
        listen                  [::]:{{ $udpServer.Port }} udp;
        {{ end }}
        {{ end }}
        proxy_responses         {{ $cfg.ProxyStreamResponses }};
        proxy_timeout           {{ $cfg.ProxyStreamTimeout }};
        proxy_pass              upstream_balancer;
    }
    {{ end }}
}

{{/* definition of templates to avoid repetitions */}}
{{ define "CUSTOM_ERRORS" }}
        {{ $enableMetrics := .EnableMetrics }}
        {{ $upstreamName := .UpstreamName }}
        {{ range $errCode := .ErrorCodes }}
        location @custom_{{ $upstreamName }}_{{ $errCode }} {
            internal;

            proxy_intercept_errors off;

            proxy_set_header       X-Code             {{ $errCode }};
            proxy_set_header       X-Format           $http_accept;
            proxy_set_header       X-Original-URI     $request_uri;
            proxy_set_header       X-Namespace        $namespace;
            proxy_set_header       X-Ingress-Name     $ingress_name;
            proxy_set_header       X-Service-Name     $service_name;
            proxy_set_header       X-Service-Port     $service_port;
            proxy_set_header       X-Request-ID       $req_id;
            proxy_set_header       Host               $best_http_host;

            set $proxy_upstream_name {{ $upstreamName | quote }};

            rewrite                (.*) / break;

            proxy_pass            http://upstream_balancer;
            log_by_lua_block {
                {{ if $enableMetrics }}
                monitor.call()
                {{ end }}
            }
        }
        {{ end }}
{{ end }}

{{/* CORS support from https://michielkalkman.com/snippets/nginx-cors-open-configuration.html */}}
{{ define "CORS" }}
     {{ $cors := .CorsConfig }}
     # Cors Preflight methods needs additional options and different Return Code
     if ($request_method = 'OPTIONS') {
        more_set_headers 'Access-Control-Allow-Origin: {{ $cors.CorsAllowOrigin }}';
        {{ if $cors.CorsAllowCredentials }} more_set_headers 'Access-Control-Allow-Credentials: {{ $cors.CorsAllowCredentials }}'; {{ end }}
        more_set_headers 'Access-Control-Allow-Methods: {{ $cors.CorsAllowMethods }}';
        more_set_headers 'Access-Control-Allow-Headers: {{ $cors.CorsAllowHeaders }}';
        more_set_headers 'Access-Control-Max-Age: {{ $cors.CorsMaxAge }}';
        more_set_headers 'Content-Type: text/plain charset=UTF-8';
        more_set_headers 'Content-Length: 0';
        return 204;
     }

        more_set_headers 'Access-Control-Allow-Origin: {{ $cors.CorsAllowOrigin }}';
        {{ if $cors.CorsAllowCredentials }} more_set_headers 'Access-Control-Allow-Credentials: {{ $cors.CorsAllowCredentials }}'; {{ end }}
        more_set_headers 'Access-Control-Allow-Methods: {{ $cors.CorsAllowMethods }}';
        more_set_headers 'Access-Control-Allow-Headers: {{ $cors.CorsAllowHeaders }}';

{{ end }}

{{/* definition of server-template to avoid repetitions with server-alias */}}
{{ define "SERVER" }}
        {{ $all := .First }}
        {{ $server := .Second }}

        {{ buildHTTPListener  $all $server.Hostname }}
        {{ buildHTTPSListener $all $server.Hostname }}

        set $proxy_upstream_name "-";

        ssl_certificate_by_lua_block {
            certificate.call()
        }

        {{ if not (empty $server.AuthTLSError) }}
        # {{ $server.AuthTLSError }}
        return 403;
        {{ else }}

        {{ if not (empty $server.CertificateAuth.CAFileName) }}
        # PEM sha: {{ $server.CertificateAuth.CASHA }}
        ssl_client_certificate                  {{ $server.CertificateAuth.CAFileName }};
        ssl_verify_client                       {{ $server.CertificateAuth.VerifyClient }};
        ssl_verify_depth                        {{ $server.CertificateAuth.ValidationDepth }};

        {{ if not (empty $server.CertificateAuth.CRLFileName) }}
        # PEM sha: {{ $server.CertificateAuth.CRLSHA }}
        ssl_crl                                 {{ $server.CertificateAuth.CRLFileName }};
        {{ end }}

        {{ if not (empty $server.CertificateAuth.ErrorPage)}}
        error_page 495 496 = {{ $server.CertificateAuth.ErrorPage }};
        {{ end }}
        {{ end }}

        {{ if not (empty $server.ProxySSL.CAFileName) }}
        # PEM sha: {{ $server.ProxySSL.CASHA }}
        proxy_ssl_trusted_certificate           {{ $server.ProxySSL.CAFileName }};
        proxy_ssl_ciphers                       {{ $server.ProxySSL.Ciphers }};
        proxy_ssl_protocols                     {{ $server.ProxySSL.Protocols }};
        proxy_ssl_verify                        {{ $server.ProxySSL.Verify }};
        proxy_ssl_verify_depth                  {{ $server.ProxySSL.VerifyDepth }};
        {{ if not (empty $server.ProxySSL.ProxySSLName) }}
        proxy_ssl_name                          {{ $server.ProxySSL.ProxySSLName }};
        proxy_ssl_server_name                   {{ $server.ProxySSL.ProxySSLServerName }};
        {{ end }}
        {{ end }}

        {{ if not (empty $server.ProxySSL.PemFileName) }}
        proxy_ssl_certificate                   {{ $server.ProxySSL.PemFileName }};
        proxy_ssl_certificate_key               {{ $server.ProxySSL.PemFileName }};
        {{ end }}

        {{ if not (empty $server.SSLCiphers) }}
        ssl_ciphers                             {{ $server.SSLCiphers }};
        {{ end }}

        {{ if not (empty $server.SSLPreferServerCiphers) }}
        ssl_prefer_server_ciphers               {{ $server.SSLPreferServerCiphers }};
        {{ end }}

        {{ if not (empty $server.ServerSnippet) }}
        {{ $server.ServerSnippet }}
        {{ end }}

        {{ range $errorLocation := (buildCustomErrorLocationsPerServer $server) }}
        {{ template "CUSTOM_ERRORS" (buildCustomErrorDeps $errorLocation.UpstreamName $errorLocation.Codes $all.EnableMetrics) }}
        {{ end }}

        {{ buildMirrorLocations $server.Locations }}

        {{ $enforceRegex := enforceRegexModifier $server.Locations }}
        {{ range $location := $server.Locations }}
        {{ $path := buildLocation $location $enforceRegex }}
        {{ $proxySetHeader := proxySetHeader $location }}
        {{ $authPath := buildAuthLocation $location $all.Cfg.GlobalExternalAuth.URL }}
        {{ $applyGlobalAuth := shouldApplyGlobalAuth $location $all.Cfg.GlobalExternalAuth.URL }}

        {{ $externalAuth := $location.ExternalAuth }}
        {{ if eq $applyGlobalAuth true }}
        {{ $externalAuth = $all.Cfg.GlobalExternalAuth }}
        {{ end }}

        {{ if not (empty $location.Rewrite.AppRoot) }}
        if ($uri = /) {
            return 302 $scheme://$http_host{{ $location.Rewrite.AppRoot }};
        }
        {{ end }}

        {{ if $authPath }}
        location = {{ $authPath }} {
            internal;

            {{ if $all.Cfg.EnableOpentracing }}
            opentracing on;
            opentracing_propagate_context;
            {{ end }}

            {{ if $externalAuth.AuthCacheKey }}
            set $tmp_cache_key '{{ $server.Hostname }}{{ $authPath }}{{ $externalAuth.AuthCacheKey }}';
            set $cache_key '';

            rewrite_by_lua_block {
                ngx.var.cache_key = ngx.encode_base64(ngx.sha1_bin(ngx.var.tmp_cache_key))
            }

            proxy_cache auth_cache;

            {{- range $dur := $externalAuth.AuthCacheDuration }}
            proxy_cache_valid {{ $dur }};
            {{- end }}

            proxy_cache_key "$cache_key";
            {{ end }}

            # ngx_auth_request module overrides variables in the parent request,
            # therefore we have to explicitly set this variable again so that when the parent request
            # resumes it has the correct value set for this variable so that Lua can pick backend correctly
            set $proxy_upstream_name {{ buildUpstreamName $location | quote }};

            proxy_pass_request_body     off;
            proxy_set_header            Content-Length          "";
            proxy_set_header            X-Forwarded-Proto       "";
            proxy_set_header            X-Request-ID            $req_id;

            {{ if $externalAuth.Method }}
            proxy_method                {{ $externalAuth.Method }};
            proxy_set_header            X-Original-URI          $request_uri;
            proxy_set_header            X-Scheme                $pass_access_scheme;
            {{ end }}

            proxy_set_header            Host                    {{ $externalAuth.Host }};
            proxy_set_header            X-Original-URL          $scheme://$http_host$request_uri;
            proxy_set_header            X-Original-Method       $request_method;
            proxy_set_header            X-Sent-From             "nginx-ingress-controller";
            proxy_set_header            X-Real-IP               $remote_addr;
            {{ if and $all.Cfg.UseForwardedHeaders $all.Cfg.ComputeFullForwardedFor }}
            proxy_set_header            X-Forwarded-For        $full_x_forwarded_for;
            {{ else }}
            proxy_set_header            X-Forwarded-For        $remote_addr;
            {{ end }}

            {{ if $externalAuth.RequestRedirect }}
            proxy_set_header            X-Auth-Request-Redirect {{ $externalAuth.RequestRedirect }};
            {{ else }}
            proxy_set_header            X-Auth-Request-Redirect $request_uri;
            {{ end }}

            {{ if $externalAuth.AuthCacheKey }}
            proxy_buffering                         "on";
            {{ else }}
            proxy_buffering                         {{ $location.Proxy.ProxyBuffering }};
            {{ end }}
            proxy_buffer_size                       {{ $location.Proxy.BufferSize }};
            proxy_buffers                           {{ $location.Proxy.BuffersNumber }} {{ $location.Proxy.BufferSize }};
            proxy_request_buffering                 {{ $location.Proxy.RequestBuffering }};
            proxy_http_version                      {{ $location.Proxy.ProxyHTTPVersion }};

            proxy_ssl_server_name       on;
            proxy_pass_request_headers  on;
            {{ if isValidByteSize $location.Proxy.BodySize true }}
            client_max_body_size        {{ $location.Proxy.BodySize }};
            {{ end }}
            {{ if isValidByteSize $location.ClientBodyBufferSize false }}
            client_body_buffer_size     {{ $location.ClientBodyBufferSize }};
            {{ end }}

            # Pass the extracted client certificate to the auth provider
            {{ if not (empty $server.CertificateAuth.CAFileName) }}
            {{ if $server.CertificateAuth.PassCertToUpstream }}
            proxy_set_header ssl-client-cert        $ssl_client_escaped_cert;
            {{ end }}
            proxy_set_header ssl-client-verify      $ssl_client_verify;
            proxy_set_header ssl-client-subject-dn  $ssl_client_s_dn;
            proxy_set_header ssl-client-issuer-dn   $ssl_client_i_dn;
            {{ end }}

            {{- range $line := buildAuthProxySetHeaders $externalAuth.ProxySetHeaders}}
            {{ $line }}
            {{- end }}

            {{ if not (empty $externalAuth.AuthSnippet) }}
            {{ $externalAuth.AuthSnippet }}
            {{ end }}

            set $target {{ $externalAuth.URL }};
            proxy_pass $target;
        }
        {{ end }}

        {{ if isLocationAllowed $location }}
        {{ if $externalAuth.SigninURL }}
        location {{ buildAuthSignURLLocation $location.Path $externalAuth.SigninURL }} {
            internal;

            add_header Set-Cookie $auth_cookie;

            return 302 {{ buildAuthSignURL $externalAuth.SigninURL }};
        }
        {{ end }}
        {{ end }}

        location {{ $path }} {
            {{ $ing := (getIngressInformation $location.Ingress $server.Hostname $location.Path) }}
            set $namespace      {{ $ing.Namespace | quote}};
            set $ingress_name   {{ $ing.Rule | quote }};
            set $service_name   {{ $ing.Service | quote }};
            set $service_port   {{ $ing.ServicePort | quote }};
            set $location_path  {{ $location.Path | escapeLiteralDollar | quote }};

            {{ buildOpentracingForLocation $all.Cfg.EnableOpentracing $location }}

            {{ if $location.Mirror.Source }}
            mirror {{ $location.Mirror.Source }};
            mirror_request_body {{ $location.Mirror.RequestBody }};
            {{ end }}

            rewrite_by_lua_block {
                lua_ingress.rewrite({{ locationConfigForLua $location $all }})
                balancer.rewrite()
                plugins.run()

                # Skywalking
                require("tracer"):start("{{ buildUpstreamName $location | quote }}")
            }

            # be careful with `access_by_lua_block` and `satisfy any` directives as satisfy any
            # will always succeed when there's `access_by_lua_block` that does not have any lua code doing `ngx.exit(ngx.DECLINED)`
            # other authentication method such as basic auth or external auth useless - all requests will be allowed.
            #access_by_lua_block {
            #}

            header_filter_by_lua_block {
                lua_ingress.header()
                plugins.run()
            }

            body_filter_by_lua_block {
                # Skywalking
                if ngx.arg[2] then
                    require("tracer"):finish()
                end
            }

            log_by_lua_block {
                balancer.log()
                {{ if $all.EnableMetrics }}
                monitor.call()
                {{ end }}

                plugins.run()

                # Skywalking
                require("tracer"):prepareForReport()
            }

            {{ if not $location.Logs.Access }}
            access_log off;
            {{ end }}

            {{ if $location.Logs.Rewrite }}
            rewrite_log on;
            {{ end }}

            {{ if $location.HTTP2PushPreload }}
            http2_push_preload on;
            {{ end }}

            port_in_redirect {{ if $location.UsePortInRedirects }}on{{ else }}off{{ end }};

            set $balancer_ewma_score -1;
            set $proxy_upstream_name {{ buildUpstreamName $location | quote }};
            set $proxy_host          $proxy_upstream_name;
            set $pass_access_scheme  $scheme;

            {{ if $all.Cfg.UseProxyProtocol }}
            set $pass_server_port    $proxy_protocol_server_port;
            {{ else }}
            set $pass_server_port    $server_port;
            {{ end }}

            set $best_http_host      $http_host;
            set $pass_port           $pass_server_port;

            set $proxy_alternative_upstream_name "";

            {{ buildModSecurityForLocation $all.Cfg $location }}

            {{ if isLocationAllowed $location }}
            {{ if gt (len $location.Whitelist.CIDR) 0 }}
            {{ range $ip := $location.Whitelist.CIDR }}
            allow {{ $ip }};{{ end }}
            deny all;
            {{ end }}

            {{ if not (isLocationInLocationList $location $all.Cfg.NoAuthLocations) }}
            {{ if $authPath }}
            # this location requires authentication
            auth_request        {{ $authPath }};
            auth_request_set    $auth_cookie $upstream_http_set_cookie;
            add_header          Set-Cookie $auth_cookie;
            {{- range $line := buildAuthResponseHeaders $externalAuth.ResponseHeaders }}
            {{ $line }}
            {{- end }}
            {{ end }}

            {{ if $externalAuth.SigninURL }}
            set_escape_uri $escaped_request_uri $request_uri;
            error_page 401 = {{ buildAuthSignURLLocation $location.Path $externalAuth.SigninURL }};
            {{ end }}

            {{ if $location.BasicDigestAuth.Secured }}
            {{ if eq $location.BasicDigestAuth.Type "basic" }}
            auth_basic {{ $location.BasicDigestAuth.Realm | quote }};
            auth_basic_user_file {{ $location.BasicDigestAuth.File }};
            {{ else }}
            auth_digest {{ $location.BasicDigestAuth.Realm | quote }};
            auth_digest_user_file {{ $location.BasicDigestAuth.File }};
            {{ end }}
            proxy_set_header Authorization "";
            {{ end }}
            {{ end }}

            {{/* if the location contains a rate limit annotation, create one */}}
            {{ $limits := buildRateLimit $location }}
            {{ range $limit := $limits }}
            {{ $limit }}{{ end }}

            {{ if $location.CorsConfig.CorsEnabled }}
            {{ template "CORS" $location }}
            {{ end }}

            {{ buildInfluxDB $location.InfluxDB }}

            {{ if isValidByteSize $location.Proxy.BodySize true }}
            client_max_body_size                    {{ $location.Proxy.BodySize }};
            {{ end }}
            {{ if isValidByteSize $location.ClientBodyBufferSize false }}
            client_body_buffer_size                 {{ $location.ClientBodyBufferSize }};
            {{ end }}

            {{/* By default use vhost as Host to upstream, but allow overrides */}}
            {{ if not (eq $proxySetHeader "grpc_set_header") }}
            {{ if not (empty $location.UpstreamVhost) }}
            {{ $proxySetHeader }} Host                   {{ $location.UpstreamVhost | quote }};
            {{ else }}
            {{ $proxySetHeader }} Host                   $best_http_host;
            {{ end }}
            {{ end }}

            # Pass the extracted client certificate to the backend
            {{ if not (empty $server.CertificateAuth.CAFileName) }}
            {{ if $server.CertificateAuth.PassCertToUpstream }}
            {{ $proxySetHeader }} ssl-client-cert        $ssl_client_escaped_cert;
            {{ end }}
            {{ $proxySetHeader }} ssl-client-verify      $ssl_client_verify;
            {{ $proxySetHeader }} ssl-client-subject-dn  $ssl_client_s_dn;
            {{ $proxySetHeader }} ssl-client-issuer-dn   $ssl_client_i_dn;
            {{ end }}

            # Allow websocket connections
            {{ $proxySetHeader }}                        Upgrade           $http_upgrade;
            {{ if $location.Connection.Enabled}}
            {{ $proxySetHeader }}                        Connection        {{ $location.Connection.Header }};
            {{ else }}
            {{ $proxySetHeader }}                        Connection        $connection_upgrade;
            {{ end }}

            {{ $proxySetHeader }} X-Request-ID           $req_id;
            {{ $proxySetHeader }} X-Real-IP              $remote_addr;
            {{ if and $all.Cfg.UseForwardedHeaders $all.Cfg.ComputeFullForwardedFor }}
            {{ $proxySetHeader }} X-Forwarded-For        $full_x_forwarded_for;
            {{ else }}
            {{ $proxySetHeader }} X-Forwarded-For        $remote_addr;
            {{ end }}
            {{ if $all.Cfg.UseForwardedHeaders }}
            {{ $proxySetHeader }} X-Forwarded-Proto      $full_x_forwarded_proto;
            {{ else }}
            {{ $proxySetHeader }} X-Forwarded-Proto      $pass_access_scheme;
            {{ end }}
            {{ $proxySetHeader }} X-Forwarded-Host       $best_http_host;
            {{ $proxySetHeader }} X-Forwarded-Port       $pass_port;
            {{ if $all.Cfg.ProxyAddOriginalURIHeader }}
            {{ $proxySetHeader }} X-Original-URI         $request_uri;
            {{ end }}
            {{ $proxySetHeader }} X-Scheme               $pass_access_scheme;

            # Pass the original X-Forwarded-For
            {{ $proxySetHeader }} X-Original-Forwarded-For {{ buildForwardedFor $all.Cfg.ForwardedForHeader }};

            # mitigate HTTPoxy Vulnerability
            # https://www.nginx.com/blog/mitigating-the-httpoxy-vulnerability-with-nginx/
            {{ $proxySetHeader }} Proxy                  "";

            # Custom headers to proxied server
            {{ range $k, $v := $all.ProxySetHeaders }}
            {{ $proxySetHeader }} {{ $k }}                    {{ $v | quote }};
            {{ end }}

            proxy_connect_timeout                   {{ $location.Proxy.ConnectTimeout }}s;
            proxy_send_timeout                      {{ $location.Proxy.SendTimeout }}s;
            proxy_read_timeout                      {{ $location.Proxy.ReadTimeout }}s;

            proxy_buffering                         {{ $location.Proxy.ProxyBuffering }};
            proxy_buffer_size                       {{ $location.Proxy.BufferSize }};
            proxy_buffers                           {{ $location.Proxy.BuffersNumber }} {{ $location.Proxy.BufferSize }};
            {{ if isValidByteSize $location.Proxy.ProxyMaxTempFileSize true }}
            proxy_max_temp_file_size                {{ $location.Proxy.ProxyMaxTempFileSize }};
            {{ end }}
            proxy_request_buffering                 {{ $location.Proxy.RequestBuffering }};
            proxy_http_version                      {{ $location.Proxy.ProxyHTTPVersion }};

            proxy_cookie_domain                     {{ $location.Proxy.CookieDomain }};
            proxy_cookie_path                       {{ $location.Proxy.CookiePath }};

            # In case of errors try the next upstream server before returning an error
            proxy_next_upstream                     {{ buildNextUpstream $location.Proxy.NextUpstream $all.Cfg.RetryNonIdempotent }};
            proxy_next_upstream_timeout             {{ $location.Proxy.NextUpstreamTimeout }};
            proxy_next_upstream_tries               {{ $location.Proxy.NextUpstreamTries }};

            {{/* Add any additional configuration defined */}}
            {{ $location.ConfigurationSnippet }}

            {{ if not (empty $all.Cfg.LocationSnippet) }}
            # Custom code snippet configured in the configuration configmap
            {{ $all.Cfg.LocationSnippet }}
            {{ end }}

            {{/* if we are sending the request to a custom default backend, we add the required headers */}}
            {{ if (hasPrefix $location.Backend "custom-default-backend-") }}
            proxy_set_header       X-Code             503;
            proxy_set_header       X-Format           $http_accept;
            proxy_set_header       X-Namespace        $namespace;
            proxy_set_header       X-Ingress-Name     $ingress_name;
            proxy_set_header       X-Service-Name     $service_name;
            proxy_set_header       X-Service-Port     $service_port;
            proxy_set_header       X-Request-ID       $req_id;
            {{ end }}

            {{ if $location.Satisfy }}
            satisfy {{ $location.Satisfy }};
            {{ end }}

            {{/* if a location-specific error override is set, add the proxy_intercept here */}}
            {{ if $location.CustomHTTPErrors }}
            # Custom error pages per ingress
            proxy_intercept_errors on;
            {{ end }}

            {{ range $errCode := $location.CustomHTTPErrors }}
            error_page {{ $errCode }} = @custom_{{ $location.DefaultBackendUpstreamName }}_{{ $errCode }};{{ end }}

            {{ if (eq $location.BackendProtocol "FCGI") }}
            include /etc/nginx/fastcgi_params;
            {{ end }}
            {{- if $location.FastCGI.Index -}}
            fastcgi_index {{ $location.FastCGI.Index | quote }};
            {{- end -}}
            {{ range $k, $v := $location.FastCGI.Params }}
            fastcgi_param {{ $k }} {{ $v | quote }};
            {{ end }}

            {{ if not (empty $location.Redirect.URL) }}
            return {{ $location.Redirect.Code }} {{ $location.Redirect.URL }};
            {{ end }}

            {{ buildProxyPass $server.Hostname $all.Backends $location }}
            {{ if (or (eq $location.Proxy.ProxyRedirectFrom "default") (eq $location.Proxy.ProxyRedirectFrom "off")) }}
            proxy_redirect                          {{ $location.Proxy.ProxyRedirectFrom }};
            {{ else if not (eq $location.Proxy.ProxyRedirectTo "off") }}
            proxy_redirect                          {{ $location.Proxy.ProxyRedirectFrom }} {{ $location.Proxy.ProxyRedirectTo }};
            {{ end }}
            {{ else }}
            # Location denied. Reason: {{ $location.Denied | quote }}
            return 503;
            {{ end }}
            {{ if not (empty $location.ProxySSL.CAFileName) }}
            # PEM sha: {{ $location.ProxySSL.CASHA }}
            proxy_ssl_trusted_certificate           {{ $location.ProxySSL.CAFileName }};
            proxy_ssl_ciphers                       {{ $location.ProxySSL.Ciphers }};
            proxy_ssl_protocols                     {{ $location.ProxySSL.Protocols }};
            proxy_ssl_verify                        {{ $location.ProxySSL.Verify }};
            proxy_ssl_verify_depth                  {{ $location.ProxySSL.VerifyDepth }};
            {{ end }}

            {{ if not (empty $location.ProxySSL.ProxySSLName) }}
            proxy_ssl_name                          {{ $location.ProxySSL.ProxySSLName }};
            {{ end }}
            {{ if not (empty $location.ProxySSL.ProxySSLServerName) }}
            proxy_ssl_server_name                   {{ $location.ProxySSL.ProxySSLServerName }};
            {{ end }}

            {{ if not (empty $location.ProxySSL.PemFileName) }}
            proxy_ssl_certificate                   {{ $location.ProxySSL.PemFileName }};
            proxy_ssl_certificate_key               {{ $location.ProxySSL.PemFileName }};
            {{ end }}
        }
        {{ end }}
        {{ end }}

        {{ if eq $server.Hostname "_" }}
        # health checks in cloud providers require the use of port {{ $all.ListenPorts.HTTP }}
        location {{ $all.HealthzURI }} {
            {{ if $all.Cfg.EnableOpentracing }}
            opentracing off;
            {{ end }}

            access_log off;
            return 200;
        }

        # this is required to avoid error if nginx is being monitored
        # with an external software (like sysdig)
        location /nginx_status {
            {{ if $all.Cfg.EnableOpentracing }}
            opentracing off;
            {{ end }}

            {{ range $v := $all.NginxStatusIpv4Whitelist }}
            allow {{ $v }};
            {{ end }}
            {{ if $all.IsIPV6Enabled -}}
            {{ range $v := $all.NginxStatusIpv6Whitelist }}
            allow {{ $v }};
            {{ end }}
            {{ end -}}
            deny all;

            access_log off;
            stub_status on;
        }

        {{ end }}

{{ end }}
lipangeng / Skywalking-Ingress-Overlay

请问你使用这个nginx.tmpl没有报错吗？ #1
