Open heisuo opened 8 months ago
Hi,请问这个问题解决了嘛?How to resolve the issue, If it is convenient, could you share the solution with me?
你可以用sd卡启动试一下
Hi,请问这个问题解决了嘛?How to resolve the issue, If it is convenient, could you share the solution with me?
你好,我们尝试购买了一个新的开发板,这很好的解决了这个问题,所以这很有可能是开发板的问题 Hello, we tried to buy a new development board, which solved the problem very well, so it is very likely that the problem is the development board
Hi,请问这个问题解决了嘛?How to resolve the issue, If it is convenient, could you share the solution with me?
你好,我们尝试购买了一个新的开发板,这很好的解决了这个问题,所以这很有可能是开发板的问题 Hello, we tried to buy a new development board, which solved the problem very well, so it is very likely that the problem is the development board
请问能添加其他联系方式详聊嘛,我对于这个项目还有一些其他的疑问想咨询,谢谢
你可以用sd卡启动试一下
很感谢你的回复!请问你是否知道哪里有关于配置该项目详细教程,我一直在寻找配置外设的方法,但是并没有找到这方面的信息。 Thank you very much for your reply! Do you know where there is a detailed tutorial on configuring this project, I have been looking for ways to configure peripherals, but have not found this information.
Hi,请问这个问题解决了嘛?How to resolve the issue, If it is convenient, could you share the solution with me?
你好,我们尝试购买了一个新的开发板,这很好的解决了这个问题,所以这很有可能是开发板的问题 Hello, we tried to buy a new development board, which solved the problem very well, so it is very likely that the problem is the development board
请问能添加其他联系方式详聊嘛,我对于这个项目还有一些其他的疑问想咨询,谢谢
欢迎交流!这是我的qq邮箱:2157848516@qq.com Welcome to communicate! This is my qq email: 2157848516@qq.com
I used the following command
litex_term --images=images/boot.json /dev/ttyUSB1
to import the linux image into the sipeed tang primer 20k development release,but the serial port command line never appeared 我使用了如下命令litex_term --images=images/boot.json /dev/ttyUSB1
将linux镜像导入sipeed tang primer 20k开发版,然而串口命令行始终没有出现 My soc parameters are as follows Thanks for all your kind answers!