What steps will reproduce the problem?
1.
将openwrt的truk/dl目录下的dnsmasq文件解压后打上dnsmasq.patch,然�
��打包回去。
2. 重新make ,在路由器上配置文件按照说明配置好
3.
访问处于名单内的域名,再查看路由表发现没有加入相应的��
�由表
What is the expected output? What do you see instead?
曾尝试在server_script
'/usr/bin/routeadd.sh'的脚本里加入调试输出,发现根本就没有运�
��此脚本程序
What version of the product are you using? On what operating system?
固件OpenWrt Barrier Breaker r38408 / LuCI Trunk (svn-r9924)
Please provide any additional information below.
按照说明,在/etc/config/dhcp.conf 添加若干选项,然后
发觉dnsmasq用的是系统自动生成的/var/etc/dnsmasq.conf
,如果直接写到dnsmasq的配置文件应该如何写?
Original issue reported on code.google.com by sdc6882...@gmail.com on 21 Oct 2013 at 7:22
Original issue reported on code.google.com by
sdc6882...@gmail.com
on 21 Oct 2013 at 7:22