Open GoogleCodeExporter opened 9 years ago
What exactly happens when it "hangs"?
Do you remain connected? Are you unable to obtain IP? Is the wless network
still visible from other devices?
If you've set the region code for either 2.4 or 5GHz to debug or a improper
region you might loose connectivity completely on certain devices, depending on
driver etc. You might also wanna look into what freq. your neighbors use, and
try to find a combination of 2.4/5 with minimal SNR.
/Kitch
Original comment by kitch2400
on 11 Dec 2013 at 5:29
[deleted comment]
*maximum SNR ^.^
Original comment by kitch2400
on 11 Dec 2013 at 5:36
Wireless network is visible, but it is unable to connect when it hang..
Sometimes, online games like CS1.6 ping spike, and cl_entitypacket error..
Funny thing is, the LAN side of router will not hang when wifi side is hang..
If using LAN port for internet, it work perfectly but not for the wifi side..
This lead me suspecting there are some issues with the wifi drivers..
Original comment by darrenli...@gmail.com
on 11 Dec 2013 at 7:00
I'm thinking interference.
Try setting another channel, or rename say the 5GHz radio to "5GHz" so you can
differentiate the two. I've had some stability issues w. the 5GHz-band myself,
but nothing a little tweaking couldn't resolve.
/Kitch
Original comment by kitch2400
on 11 Dec 2013 at 7:59
Okay, Change 5ghz channel to different name by adding 5GHZ in the SSID.
before that, the name is same as the 2.4GHZ channel..
Original comment by darrenli...@gmail.com
on 12 Dec 2013 at 3:24
Its pretty much up to your driver/software if it prefers 2.4 over 5. I find it
easier to just have a unique name for each band.
/Kitch
Original comment by kitch2400
on 12 Dec 2013 at 10:40
Tested with different name for 5GHZ.. But the WiFi still hang,causes my Online
game to disconnect. [The LAN side is working fine]
Just rebooted the router again and the wifi works fine again.
No such issue with official firmware but not the padavan version.
So, how to solve it? Drivers Problem or setting problem?
NOTE: my settings for wireless is default settings except for SSID name and
Encryption which uses WPA2 which 16key passcode.
Original comment by darrenli...@gmail.com
on 12 Dec 2013 at 1:56
Post your system log and I'll look into this a little later.
/Kitch
Original comment by kitch2400
on 12 Dec 2013 at 5:57
Just want to note that this is the same issue in 333, just that the symptoms
are reported differently...
Original comment by chu...@gmail.com
on 21 Sep 2014 at 2:02
Original issue reported on code.google.com by
darrenli...@gmail.com
on 11 Dec 2013 at 2:46