enabled vpi/vci

[GoogleCodeExporter]

What steps will reproduce the problem?
1. Watching IPTV in Lithuania.
2. Enabling vpi/vci for each individual port.

What is the expected output? What do you see instead?
Internet and IPTV at the same time

What version of the product are you using? On what operating system?
1.0.1.7f-p8

Please provide any additional information below.

I live in Lithuania and my provider TEO provides IPTV called Gala. But 
unfortunately they use coded packets. If i select manual VLAN filter+partitions 
VLAN configuration and input IPTV VID 6 
(http://imageshack.us/photo/my-images/696/n56u.jpg/) i can watch IPTV without 
any problems but Internet is not working from any other physical port. If i 
select manual VLAN filter and input VID 6 i can no longer watch IPTV but 
internet starts working again. Maybe there is a possibility to somehow bridge 
WAN to LAN and add possibility to input vpi/vci to each individual physical 
port on N56U router so i could watch IPTV and use internet at the same time? 
Sorry for such complicated question and accept my apologies if i don't 
understand something :)    

Original issue reported on code.google.com by Vysniaus...@gmail.com on 15 Jan 2012 at 4:37

[GoogleCodeExporter]

Hello!
Lucky you are! )) Your provider suggests such services...

Try to set both:
IPTV VID = 6
Internet VID = { 100 if DEC , 64 if DEC->Hex, 256 if HEX->DEC }
Consult your ISP with these settings

Original comment by d...@soulblader.com on 15 Jan 2012 at 8:19

[GoogleCodeExporter]

Hello,

Thank you you for quick answer. Unfortunately none of these wok form me. 
Yesterday i got consultation from one of TEO employ's and i was advised that 
100 should be typed in but unfortunately this does not work. GALA TV only works 
when Manual VLAN filtering + partitions is selected but as soon as i enter this 
mode and type in all VID fields only TV is working and no internet is 
available. Maybe you would be able to advice where the problem is? i  could 
provide screen shots or even let you connect through remote desktop if that 
would help. 

Kind Regards,
Kasparas

Original comment by Vysniaus...@gmail.com on 15 Jan 2012 at 8:34

[GoogleCodeExporter]

Ok. I'll think what i can do and let you know about needed info.

Original comment by d...@soulblader.com on 15 Jan 2012 at 9:01

[GoogleCodeExporter]

Just update... Tried 1.0.1.7f-p9, still no luck :(

Original comment by Vysniaus...@gmail.com on 16 Jan 2012 at 6:13

[GoogleCodeExporter]

Hi again,

I have received already configured for GALA TV router from the provider. Maybe 
you need screenshots of settings? or would you like to connect to it through 
remote admistration? I just thought that this might help with this issue.

Thanks and Regards,
Kasparas

Original comment by Vysniaus...@gmail.com on 18 Jan 2012 at 12:44

[GoogleCodeExporter]

Hello! Thank you very much for your kind offer!
Could you please write the model of this router and if it has access to command 
line?..
Thanks!

Original comment by d...@soulblader.com on 1 Mar 2012 at 5:14

[GoogleCodeExporter]

So, is there any modifications? Have same problem. Internet did not use tagged 
packets, IPTV use tagged packets (PVID 6). 

Original comment by a.minde...@gmail.com on 4 Jun 2012 at 1:19

[GoogleCodeExporter]

I guess the title is misleading vpi/vci are used for DSL, VID's are used for 
optical.
anyway, no solution so far. Setting VID's only enable IPTV.

Original comment by SWATs...@gmail.com on 27 Jun 2012 at 5:01

[GoogleCodeExporter]

Hello, 

I have same wish...i want to create gigabit LAN at home with RT N56 routing 
everything including O2 TV iptv service (Czech Rep.). 

Unfortunately modem Comtrend is 100mbit only and it has special firmware with 
dedicated LAN port for O2 TV STB connection.

Because I dont know how to set up RT N56 correctly, i have to keep Comtrend as 
a router = no GLAN :(

O2 told me that port which connects STB to router needs to be:

1/ in briged  mode
2/ VPI = 8
3/ VCP = 35
4/ QoS set with priority to this port

Many thanks for any leads

Original comment by pavel.bl...@gmail.com on 5 Apr 2013 at 2:13

[GoogleCodeExporter]

Anyone has a solution to VPI/VCI setup?
What i need to setup for my PPPoE conn is:
Encapsulation: LLC
QoS class: UBR
VPI/VCI: 0/86

Anyone knows how to set this up in this firmware??

Original comment by domagoj....@gmail.com on 15 May 2014 at 10:38