Geoda tutorial-Spatial Data Handling-base map

[gs-geog]

Nokia Day base map optional is not working properly

Thanks!

[lixun910]

This is caused by the change of HERE’s map tile service. You can specify your HERE account in GeoDa. Or simply try to use our latest version : Win64: https://geodasoftware.s3-us-west-2.amazonaws.com/GeoDa-1.14.0.0-Windows-64bit.exe

Xun Li, Ph.D.

Assistant Director of Data Science Center for Spatial Data Science University of Chicago

On Aug 9, 2019, at 4:58 PM, gs-geog notifications@github.com wrote:

Nokia Day base map optional is not working properly

Thanks!

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or mute the thread.

[gs-geog]

Xun:

I run into a problem with your "Boston housing and neighborhood data" data set. When I tried to create a weight file, it popped up an error message. I did not have the problem just a few days ago when I was performing the same task. I tried to close Geoda, download the data again but the problem remains.

[image: image.png]

Any suggestions?

Thanks!

Wei

On Fri, Aug 9, 2019 at 9:01 PM Xun Li notifications@github.com wrote:

This is caused by the change of HERE’s map tile service. You can specify your HERE account in GeoDa. Or simply try to use our latest version : Win64: https://geodasoftware.s3-us-west-2.amazonaws.com/GeoDa-1.14.0.0-Windows-64bit.exe

Xun Li, Ph.D.

Assistant Director of Data Science Center for Spatial Data Science University of Chicago

On Aug 9, 2019, at 4:58 PM, gs-geog notifications@github.com wrote:

Nokia Day base map optional is not working properly

Thanks!

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or mute the thread.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/lixun910/geoda/issues/33?email_source=notifications&email_token=AM3UKO463IY3DMEK5ASV34DQDYHOTA5CNFSM4IKYBWBKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD4ACYHI#issuecomment-520104989, or mute the thread https://github.com/notifications/unsubscribe-auth/AM3UKO2XVDAMOVCG27JAAKDQDYHOTANCNFSM4IKYBWBA .

-- Wei Tu, Ph.D.

Professor of Geography and Geographic Information Science Department of Geology and Geography Georgia Southern University Statesboro, GA 30460-8149

Tel: 912-478-5233 Fax: 912-478-0668 E-mail: wtu@georgiasouthern.edu

Physical discomfort and exhaustion come and go, they are transient. Mental satisfaction and sense of accomplishment stay for the rest of your life. - An anonymous marathon finisher

[lixun910]

Can you send me a screenshot of the weights creation dialog w/ parameters and the screenshot of the error message? Thanks !

Xun

On Fri, Oct 25, 2019 at 6:53 AM gs-geog notifications@github.com wrote:

Xun:

I run into a problem with your "Boston housing and neighborhood data" data set. When I tried to create a weight file, it popped up an error message. I did not have the problem just a few days ago when I was performing the same task. I tried to close Geoda, download the data again but the problem remains.

[image: image.png]

Any suggestions?

Thanks!

Wei

On Fri, Aug 9, 2019 at 9:01 PM Xun Li notifications@github.com wrote:

This is caused by the change of HERE’s map tile service. You can specify your HERE account in GeoDa. Or simply try to use our latest version : Win64:

https://geodasoftware.s3-us-west-2.amazonaws.com/GeoDa-1.14.0.0-Windows-64bit.exe

Xun Li, Ph.D.

Assistant Director of Data Science Center for Spatial Data Science University of Chicago

On Aug 9, 2019, at 4:58 PM, gs-geog notifications@github.com wrote:

Nokia Day base map optional is not working properly

Thanks!

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or mute the thread.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub < https://github.com/lixun910/geoda/issues/33?email_source=notifications&email_token=AM3UKO463IY3DMEK5ASV34DQDYHOTA5CNFSM4IKYBWBKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD4ACYHI#issuecomment-520104989 , or mute the thread < https://github.com/notifications/unsubscribe-auth/AM3UKO2XVDAMOVCG27JAAKDQDYHOTANCNFSM4IKYBWBA

.

-- Wei Tu, Ph.D.

Professor of Geography and Geographic Information Science Department of Geology and Geography Georgia Southern University Statesboro, GA 30460-8149

Tel: 912-478-5233 Fax: 912-478-0668 E-mail: wtu@georgiasouthern.edu

Physical discomfort and exhaustion come and go, they are transient. Mental satisfaction and sense of accomplishment stay for the rest of your life. - An anonymous marathon finisher

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/lixun910/geoda/issues/33?email_source=notifications&email_token=AASPYTYR2YVP6FFCYFGETPDQQL23ZA5CNFSM4IKYBWBKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOECINN4Q#issuecomment-546363122, or unsubscribe https://github.com/notifications/unsubscribe-auth/AASPYTZ7AMBIKPMA3345BSTQQL23ZANCNFSM4IKYBWBA .

[gs-geog]

I could neither load or create a new weight file anymore. Below is the error message when I tried to load an old file or create a new one. Attached also is the weight file that I created before.

[image: image.png]

On Fri, Oct 25, 2019 at 10:32 AM Xun Li notifications@github.com wrote:

Can you send me a screenshot of the weights creation dialog w/ parameters and the screenshot of the error message? Thanks !

Xun

On Fri, Oct 25, 2019 at 6:53 AM gs-geog notifications@github.com wrote:

Xun:

I run into a problem with your "Boston housing and neighborhood data" data set. When I tried to create a weight file, it popped up an error message. I did not have the problem just a few days ago when I was performing the same task. I tried to close Geoda, download the data again but the problem remains.

[image: image.png]

Any suggestions?

Thanks!

Wei

On Fri, Aug 9, 2019 at 9:01 PM Xun Li notifications@github.com wrote:

This is caused by the change of HERE’s map tile service. You can specify your HERE account in GeoDa. Or simply try to use our latest version : Win64:

https://geodasoftware.s3-us-west-2.amazonaws.com/GeoDa-1.14.0.0-Windows-64bit.exe

Xun Li, Ph.D.

Assistant Director of Data Science Center for Spatial Data Science University of Chicago

On Aug 9, 2019, at 4:58 PM, gs-geog notifications@github.com wrote:

Nokia Day base map optional is not working properly

Thanks!

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or mute the thread.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <

https://github.com/lixun910/geoda/issues/33?email_source=notifications&email_token=AM3UKO463IY3DMEK5ASV34DQDYHOTA5CNFSM4IKYBWBKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD4ACYHI#issuecomment-520104989

, or mute the thread <

https://github.com/notifications/unsubscribe-auth/AM3UKO2XVDAMOVCG27JAAKDQDYHOTANCNFSM4IKYBWBA

.

-- Wei Tu, Ph.D.

Professor of Geography and Geographic Information Science Department of Geology and Geography Georgia Southern University Statesboro, GA 30460-8149

Tel: 912-478-5233 Fax: 912-478-0668 E-mail: wtu@georgiasouthern.edu

Physical discomfort and exhaustion come and go, they are transient. Mental satisfaction and sense of accomplishment stay for the rest of your life.

An anonymous marathon finisher

— You are receiving this because you commented. Reply to this email directly, view it on GitHub < https://github.com/lixun910/geoda/issues/33?email_source=notifications&email_token=AASPYTYR2YVP6FFCYFGETPDQQL23ZA5CNFSM4IKYBWBKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOECINN4Q#issuecomment-546363122 , or unsubscribe < https://github.com/notifications/unsubscribe-auth/AASPYTZ7AMBIKPMA3345BSTQQL23ZANCNFSM4IKYBWBA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/lixun910/geoda/issues/33?email_source=notifications&email_token=AM3UKOY467JJGA42LXYZZ4LQQL7PNA5CNFSM4IKYBWBKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOECIRFYY#issuecomment-546378467, or unsubscribe https://github.com/notifications/unsubscribe-auth/AM3UKOYL5SWZBPV7GBOO3XTQQL7PNANCNFSM4IKYBWBA .

-- Wei Tu, Ph.D.

Professor of Geography and Geographic Information Science Department of Geology and Geography Georgia Southern University Statesboro, GA 30460-8149

Tel: 912-478-5233 Fax: 912-478-0668 E-mail: wtu@georgiasouthern.edu

Physical discomfort and exhaustion come and go, they are transient. Mental satisfaction and sense of accomplishment stay for the rest of your life. - An anonymous marathon finisher

[lixun910]

@gs-geog Sorry, I can't see the attached image. Can you post the screenshot in github: https://github.com/lixun910/geoda/issues/33 ? Thanks!

[EagleGeo]

[lixun910]

As shown in the warning dialog, the dataset doesn't have a "POLY_ID" column, so when you creating a weights file, you can either

1. specify another "ID variable" e.g. id (see screenshot)

or 2. click the "Add ID Variable" button and add a POLY_ID column to the table. (see screenshot)

Please note, you need to click the "save" button in GeoDa toolbar to save the newly added column POLY_ID to the original dataset, otherwise, you will get the same warning dialog when you creating a weights file with "POLY_ID" as ID variable.

[gs-geog]

Thanks!

On Fri, Oct 25, 2019 at 2:04 PM Xun Li notifications@github.com wrote:

As shown in the warning dialog, the dataset doesn't have a "POLY_ID" column, so when you creating a weights file, you can either

1. specify another "ID variable" e.g. id (see screenshot)

[image: Screen Shot 2019-10-25 at 11 00 19 AM] https://user-images.githubusercontent.com/2423887/67593284-b6386080-f716-11e9-9257-c3424ca96fda.png

or 2. click the "Add ID Variable" button and add a POLY_ID column to the table. (see screenshot) [image: Screen Shot 2019-10-25 at 11 01 11 AM] https://user-images.githubusercontent.com/2423887/67593333-d5cf8900-f716-11e9-9a93-64bb4e479059.png Please note, you need to click the "save" button in GeoDa toolbar to save the newly added column POLY_ID to the original dataset, otherwise, you will get the same warning dialog when you creating a weights file with "POLY_ID" as ID variable.

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/lixun910/geoda/issues/33?email_source=notifications&email_token=AM3UKOYXEIV33IOKDPWIAI3QQMYJ7A5CNFSM4IKYBWBKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOECJDUSA#issuecomment-546454088, or unsubscribe https://github.com/notifications/unsubscribe-auth/AM3UKO2LQI4GAGAN2XG4DSTQQMYJ7ANCNFSM4IKYBWBA .

-- Wei Tu, Ph.D.

Professor of Geography and Geographic Information Science Department of Geology and Geography Georgia Southern University Statesboro, GA 30460-8149

Tel: 912-478-5233 Fax: 912-478-0668 E-mail: wtu@georgiasouthern.edu

Physical discomfort and exhaustion come and go, they are transient. Mental satisfaction and sense of accomplishment stay for the rest of your life. - An anonymous marathon finisher

[EagleGeo]

Hi, Where can I find Weights Intersection tool? As you can see, my "Weights Manger" does not have the option.

Thanks!

[EagleGeo]

This is from the work book.

[lixun910]

Can you try to use our latest version: http://geodacenter.github.io/download.html ?

[EagleGeo]

updated and problem solved! Thanks!

On Thu, Oct 31, 2019 at 1:13 PM Xun Li notifications@github.com wrote:

Can you try to use our latest version: http://geodacenter.github.io/download.html ?

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/lixun910/geoda/issues/33?email_source=notifications&email_token=AKHEM43HRXPKQNEVPSHN5MDQRMG3DA5CNFSM4IKYBWBKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOECYRXJQ#issuecomment-548477862, or unsubscribe https://github.com/notifications/unsubscribe-auth/AKHEM46HHMC3VQG6MRUXMDDQRMG3DANCNFSM4IKYBWBA .

[EagleGeo]

I was not able to generate the same gal after intersecting the queen and queen gal.

[EagleGeo]

Two input gal