How to control dim value on Wall Dimmer (AW51011D) - HF-LPB100

ljalves / hfeasy

HFeasy - firmware for HF-LPx100/LPx30 based devices

45 stars 14 forks source link

How to control dim value on Wall Dimmer (AW51011D) - HF-LPB100 #13

Closed chaudhryfaisal closed 4 years ago

chaudhryfaisal commented 4 years ago

Hello, First of all, many thanks for your involvement and development,

I am trying to update AW51011D and it seems to have no impact. I tried to upload HFEASY0v7_DIMMER_UPGRADE.bin and after upgrade goes through it present same web page again as if nothing changes. I also tried ORIGINAL_FW_DIMMER_1_5115.BIN.bin and it again had no effect on it.

Screen Shot 2020-04-06 at 8 51 38 PM

ljalves commented 4 years ago

Did you read the README.md? Main webpage does not change! After flashing hfeasy just check one of its webpages works (like http://ip/status).

chaudhryfaisal commented 4 years ago

yes I thought I updated this post but it was in draft I was able to flash it with your firmware. my next question was how to control brightness but I figured it out by invoking state?sw=1-128

thank you again for the amazing work you have done.