search

ljalves / hfeasy

HFeasy - firmware for HF-LPx100/LPx30 based devices
45 stars 14 forks source link

HF-LPT100F bricked #14

Closed kikkopikk closed 4 years ago

kikkopikk commented 4 years ago

Hi, i have upload the HFEASY0v7_MODULE_UPGRADE.bin on my Anuoo rec. After that, it worked, for some sec and after that it is offline. I have tried to "factory reset" it (6/10 turn off/on in 3sec) and it only turn on the light with a flash and nothing else. I tried to remove the 220v, but no wifi segnal or acustic sound. How can i repare it? photo_2020-04-12_11-17-15

Linearburn commented 4 years ago

does it do anything?

kikkopikk commented 4 years ago

Nope, I works only as physical rely, not smart. It's offline and i can't reach It by its wifi network ip.

Il lun 13 apr 2020, 01:13 Nathan notifications@github.com ha scritto:

does it do anything?

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/ljalves/hfeasy/issues/14#issuecomment-612690306, or unsubscribe https://github.com/notifications/unsubscribe-auth/ALOVXQPXUWBFOLPKKMK7IQDRMJDKDANCNFSM4MGK6AVA .

ljalves commented 4 years ago

Did you check if it is in AP mode? Scan for open wireless networks (usually named REC....).

kikkopikk commented 4 years ago

I see the network HF-LPB100, and now i reach the rely. and it's Solved but... I set again the wifi home network, and it works good with http call. But i cannot add it to the rec app on my phone and so i can't link it with alexa. How can i do that?

Il giorno mar 14 apr 2020 alle ore 11:03 Luis Alves < notifications@github.com> ha scritto:

Did you check if it is in AP mode? Scan for open wireless networks (usually named REC....).

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/ljalves/hfeasy/issues/14#issuecomment-613318280, or unsubscribe https://github.com/notifications/unsubscribe-auth/ALOVXQKR2L3KWW3FUELFRM3RMQRHDANCNFSM4MGK6AVA .

ljalves commented 4 years ago

This firmware doesn't work with the original REC app - the whole goal is to have the devices not connected to the whole world. It's meant to be used with either http or mqtt control.

You can use a couple of home automation software to make it work with Alexa (like openhab2, etc). Just google for a couple of guides.

Closing issue.