search

ljalves / hfeasy

HFeasy - firmware for HF-LPx100/LPx30 based devices
45 stars 14 forks source link

hfeasy on rec plug startup mode #27

Closed papampi closed 2 years ago

papampi commented 2 years ago

I just installed hfeasy firmware on rec plug but it boots with state 0 disconnected mode. Is there any way to make it boot with state 1, connected mode?

Also tried to restore to factory and now the app not work. Any ideas?

papampi commented 2 years ago

Update: Found out that if use on timer it will wait the time and turn on the device at reboot.

jayPare commented 2 years ago

@papampi do you mean Timer or Countdown?

papampi commented 2 years ago

Timer has two modes on and off each one waits the time you set for the other one to kicks in and activate, so if you set timer to "on" with 5 seconds whenever switch off it gets back on in 5 seconds also if lost power or for whatever reason unplug it waits 5 seconds and turn on the switch.

jayPare commented 2 years ago

@papampi yeah so you meant Countdown. Timer feature is not yet implemented.

papampi commented 2 years ago

No I mean timer I use it with http://ip/timer

Edit: Yes it's count down in timer menu.

ljalves commented 2 years ago

Let me try to provide at the config page a field to specify the power on state.

ljalves commented 2 years ago

Feature available on release 0v9 (https://github.com/ljalves/hfeasy/releases/tag/0v9)