search

ljalves / hfeasy

HFeasy - firmware for HF-LPx100/LPx30 based devices
45 stars 14 forks source link

Timer switches it on/off even though I hve no timers set-up #42

Open ghost opened 1 year ago

ghost commented 1 year ago

Hello,

Thanks a lot for the work you've done!

I have a HF-LPB100 plug. I've installed the latest 1v1 version on it.

I haven't connected it to anything, I've only been using it from the web interface.

I noticed that after some time (approx 1 hour or 1.5 hours believe) it switches itself to the status set in Device section of the configuration. I only tested with putting the Device config state to 1 until now.

I checked the status after this behavior: image

As you can see, it says it was changed by timer, but this is my timer configuration: image

My suspicion is that is somehow restarts and puts the status from Device config, but I will do some more tests to confirm this. I can provide more info if needed.

Thanks again.

jkadin commented 1 year ago

Did you ever figure out my it's resetting? Mine is doing this as well.