search

ljalves / hfeasy

HFeasy - firmware for HF-LPx100/LPx30 based devices
45 stars 14 forks source link

LED flickering #5

Closed korgak closed 4 years ago

korgak commented 5 years ago

The blue LED on my wifi smart plug keeps going on and off. Can we disable it? Because that is really annoying and unnecessary in a bedroom.

Malmbergs Wi-fi smart plug Model: SW6201

ljalves commented 5 years ago

Whats the flicker frequency? It should only flicker on and off when it is not connected to the server. Once the connection is established, it should "calm down"...

korgak commented 5 years ago

Thanks for the response. It is once each 2 or 2.5 seconds and continuously. I can switch the device nonetheless so it is still connected to the wifi.

ljalves commented 4 years ago

It flickers when disconnected from the mqtt server (not wifi). I will add some options to select the wifi LED behaviour. Maybe these options for the LED:

Any other suggestions?

korgak commented 4 years ago

O that would be such an improvement, I think your suggestions are just fine. Thanks a lot.

Op ma 24 feb. 2020 17:10 schreef Luis Alves notifications@github.com:

It flickers when disconnected from the mqtt server (not wifi). I will add some options to select the wifi LED behaviour. Maybe these options for the LED:

  • OFF
  • MQTT status (as is right now).
  • HTTP status (blink when being controlled by http requests).
  • ?

Any other suggestions?

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/ljalves/hfeasy/issues/5?email_source=notifications&email_token=ABUF6BDAIIBRQHFJADD2BN3REPWQ5A5CNFSM4IIIQICKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEMYOUHA#issuecomment-590408220, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABUF6BCWP5DNQNTRDU7IDH3REPWQ5ANCNFSM4IIIQICA .

ljalves commented 4 years ago

Enhancement available on release 0v6 (available on gdrive).

The LED is configurable on the main config page. Also added an option to locate the module - the LED will flicker in an unique pattern".