Closed Ga1j1n closed 7 years ago
Too bad I don't have a sparky board to test on :(.
I'm happy to test, or could make a donation towards one, I have to admit I'm gravitating towards the Sparky2 and raceflight these days for Quads but my Trifecta Tri is built with a Sparky 1.
Could try to make a build without the servo feedback pins configured. It's most likely that or then sparky has less flash/ram. Could also make another build without GPS for testing. 29.3.2016 7.48 ip. "Ga1j1n" notifications@github.com kirjoitti:
I'm happy to test, or could make a donation towards one, I have to admit I'm gravitating towards the Sparky2 and raceflight these days for Quads but my Trifecta Tri is built with a Sparky 1.
http://www.xt-xinte.com/F16821.html
— You are receiving this because you commented. Reply to this email directly or view it on GitHub https://github.com/lkaino/Triflight/issues/15#issuecomment-202993073
Sounds good, let me know and I'll flash it.
Thanks
The Sparky hex corrupts the board prompting an unrecognised target message in windows devices, the bootloader bins must be shorted to allow re-flashing of cleanflight.
(It's a shame as I was looking forward to trying it)