Open djmuerteitm opened 3 years ago
Hi,
RXD2 to ground puts controllino in a totally static mode without any network.
"Invalid signature" message is not an error, it just means that the configuration stored in EEPROM is either empty (like in your case) or incompatible (e.g. from a previous version). You can run controllino normally with this code, and once it is running go to configuration menu, set it all and reboot.
If possible please attach a log from the terminal, I will look into this.
[...] (cut the whole build log) Linking everything together... /home/r00t/.arduino15/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-gcc -Os -g -flto -fuse-linker-plugin -Wl,--gc-sections -mmcu=atmega2560 -o /tmp/arduino_build_406333/ControllinoMqtt.ino.elf /tmp/arduino_build_406333/sketch/Configuration.cpp.o /tmp/arduino_build_406333/sketch/ControllinoMqtt.ino.cpp.o /tmp/arduino_build_406333/sketch/ModbusRtu.cpp.o /tmp/arduino_build_406333/sketch/PLC.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/ArduinoSTL.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/algorithm.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/associative_base.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/bitset.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/char_traits.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/complex.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/del_op.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/del_opnt.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/del_ops.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/del_opv.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/del_opvnt.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/del_opvs.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/deque.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/eh_alloc.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/eh_globals.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/exception.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/func_exception.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/iomanip.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/ios.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/iostream.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/istream.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/iterator.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/limits.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/list.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/locale.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/map.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/new_handler.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/new_op.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/new_opnt.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/new_opv.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/new_opvnt.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/numeric.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/ostream.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/ostream_helpers.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/queue.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/set.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/sstream.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/stack.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/stdexcept.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/streambuf.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/string.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/support.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/typeinfo.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/utility.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/valarray.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/vector.cpp.o /tmp/arduino_build_406333/libraries/ArduinoSTL/abi/abi.cpp.o /tmp/arduino_build_406333/libraries/CONTROLLINO/Controllino.cpp.o /tmp/arduino_build_406333/libraries/SPI/SPI.cpp.o /tmp/arduino_build_406333/libraries/PubSubClient/PubSubClient.cpp.o /tmp/arduino_build_406333/libraries/Ethernet/Dhcp.cpp.o /tmp/arduino_build_406333/libraries/Ethernet/Dns.cpp.o /tmp/arduino_build_406333/libraries/Ethernet/Ethernet.cpp.o /tmp/arduino_build_406333/libraries/Ethernet/EthernetClient.cpp.o /tmp/arduino_build_406333/libraries/Ethernet/EthernetServer.cpp.o /tmp/arduino_build_406333/libraries/Ethernet/EthernetUdp.cpp.o /tmp/arduino_build_406333/libraries/Ethernet/socket.cpp.o /tmp/arduino_build_406333/libraries/Ethernet/utility/w5100.cpp.o /tmp/arduino_build_406333/libraries/Queue/cppQueue.cpp.o /tmp/arduino_build_406333/libraries/SoftwareSerial/SoftwareSerial.cpp.o /tmp/arduino_build_406333/core/core.a -L/tmp/arduino_build_406333 -lm /home/r00t/.arduino15/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-objcopy -O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0 /tmp/arduino_build_406333/ControllinoMqtt.ino.elf /tmp/arduino_build_406333/ControllinoMqtt.ino.eep /home/r00t/.arduino15/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-objcopy -O ihex -R .eeprom /tmp/arduino_build_406333/ControllinoMqtt.ino.elf /tmp/arduino_build_406333/ControllinoMqtt.ino.hex Usando librería ArduinoSTL con versión 1.1.0 en la carpeta: /home/r00t/Arduino/libraries/ArduinoSTL Usando librería EEPROM con versión 2.0 en la carpeta: /home/r00t/.arduino15/packages/arduino/hardware/avr/1.6.23/libraries/EEPROM Usando librería CONTROLLINO con versión 3.0.5 en la carpeta: /home/r00t/Arduino/libraries/CONTROLLINO Usando librería SPI con versión 1.0 en la carpeta: /home/r00t/.arduino15/packages/arduino/hardware/avr/1.6.23/libraries/SPI Usando librería PubSubClient con versión 2.8 en la carpeta: /home/r00t/Arduino/libraries/PubSubClient Usando librería Ethernet con versión 2.0.0 en la carpeta: /home/r00t/Descargas/arduino/arduino-1.8.13/libraries/Ethernet Usando librería Queue con versión 1.9 en la carpeta: /home/r00t/Arduino/libraries/Queue Usando librería SoftwareSerial con versión 1.0 en la carpeta: /home/r00t/.arduino15/packages/arduino/hardware/avr/1.6.23/libraries/SoftwareSerial /home/r00t/.arduino15/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-size -A /tmp/arduino_build_406333/ControllinoMqtt.ino.elf El Sketch usa 38924 bytes (15%) del espacio de almacenamiento de programa. El máximo es 253952 bytes. Las variables Globales usan 2096 bytes (25%) de la memoria dinámica, dejando 6096 bytes para las variables locales. El máximo es 8192 bytes. /home/r00t/.arduino15/packages/arduino/tools/avrdude/6.3.0-arduino14/bin/avrdude -C/home/r00t/.arduino15/packages/arduino/tools/avrdude/6.3.0-arduino14/etc/avrdude.conf -v -patmega2560 -cwiring -P/dev/ttyACM0 -b115200 -D -Uflash:w:/tmp/arduino_build_406333/ControllinoMqtt.ino.hex:i
avrdude: Version 6.3-20171130 Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/ Copyright (c) 2007-2014 Joerg Wunsch
System wide configuration file is "/home/r00t/.arduino15/packages/arduino/tools/avrdude/6.3.0-arduino14/etc/avrdude.conf"
User configuration file is "/home/r00t/.avrduderc"
User configuration file does not exist or is not a regular file, skipping
Using Port : /dev/ttyACM0
Using Programmer : wiring
Overriding Baud Rate : 115200
AVR Part : ATmega2560
Chip Erase delay : 9000 us
PAGEL : PD7
BS2 : PA0
RESET disposition : dedicated
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 200
StabDelay : 100
CmdexeDelay : 25
SyncLoops : 32
ByteDelay : 0
PollIndex : 3
PollValue : 0x53
Memory Detail :
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
eeprom 65 10 8 0 no 4096 8 0 9000 9000 0x00 0x00
flash 65 10 256 0 yes 262144 256 1024 4500 4500 0x00 0x00
lfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
hfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
efuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
lock 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00
signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00
Programmer Type : Wiring
Description : Wiring
Programmer Model: AVRISP
Hardware Version: 15
Firmware Version Master : 2.10
Vtarget : 0.0 V
SCK period : 0.1 us
avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.01s
avrdude: Device signature = 0x1e9801 (probably m2560) avrdude: reading input file "/tmp/arduino_build_406333/ControllinoMqtt.ino.hex" avrdude: writing flash (38924 bytes):
Writing | ################################################## | 100% 6.26s
avrdude: 38924 bytes of flash written avrdude: verifying flash memory against /tmp/arduino_build_406333/ControllinoMqtt.ino.hex: avrdude: load data flash data from input file /tmp/arduino_build_406333/ControllinoMqtt.ino.hex: avrdude: input file /tmp/arduino_build_406333/ControllinoMqtt.ino.hex contains 38924 bytes avrdude: reading on-chip flash data:
Reading | ################################################## | 100% 4.97s
avrdude: verifying ... avrdude: 38924 bytes of flash verified
avrdude done. Thank you._
**I have been upload your sketch with no modifications. And output for serial monitor: 23:25:35.984 -> Fallback logic (when short RXD2 and ground): 23:25:41.349 -> Loading configuration...signature invalid!!!
Board information displayed on IDE: BN: Arduino/Genuino Mega or Mega 2560 VID: 2341 PID: 0042 SN: 5563231373835161E002
Must be caused by wrong bootloader?
All libraries and boards of IDE are full updated. Running on Ubuntu 20.04, IDE 1.8.13.
Thanks in advance.**
@djmuerteitm Did you change the #define TRACE_LEVEL_DEBUG 1
? Because you should be seeing the other debug messages such as the one from this code:
DEBUG_PRINT("Initializing PLC");
When the configuration is invalid, the controllino is in non-initialized state. Have you tried sending enter to the serial console? You should get the message To enter configuration mode press C
I will try to prepare better instructions in readme.md so that it's clearer how to get it started. I agree it is a bit confusing, I left the process from the old project I forked and it's not very obvious what should be done.
I will try send Enter and i tell you. Thanks :)
Hi again.
I sent enter using serial session, as you told me, throug Putty and i can reach config menu, but i cant set the parameters correctly. I try to set MAC using ( ), without it, on caps... but on reboot controllino and enter again on config menu, the params stored are like this...
1: Enter MAC => (0:0:2:a:0:3) 2: Enter IP => (192.000.008.001) 3: MQTT Server IP => (192.136.000.008)
Valid MAC is 90:a2:da:00:53:55 Ips are 192.168.1.70 for controllino and .50 for mqtt broker, but i cant set it right.
Trying set parameters on the sketch, but same results and no response to ping.
Any ideas? Thanks in advance :)
Update: I tryed uploading another sketch, and upload yours again, with configured params on it, and it works. But if I reboot controllino without RXD2 and GND shorted, it seems like settings are not loaded again (no ping). I need to short them to make it work again.
Reboot without short pins = not working and no ping Reboot momentary shorted or still shorted = works.
Needs to still shorted?
Hi!
I have a Controllino Mega, and im trying to enter configuration menu to set and store my own parameters after sucessfully sketch upload, but when I short RXD2 to ground, i receive "invalid signature". No errors during compilation or upload.
I've tried to modify settings to mine in configuration file (IP, broker, etc), but after compile and upload (no errors) i cant reach Controllino on Network (ping not responding). It seems like settings won't be stored by this way, maybe?
How can i fix it or skip signature device verification? Other sketches uploaded with ethernet integration works fine, Controllino works well for sure.
Thanks in advance!!