lnls-dig openMMC issues

lnls-dig / openMMC

Open source firmware for MMC controllers

GNU General Public License v3.0

39 stars 32 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Doc style

#225 gustavosr8 closed 13 hours ago
0
Correct the `.IDtypelen` string to match the `.IDstring` one.

#224 gustavosr8 closed 3 months ago
1
Update CI configuration to use GitHub actions V4

#223 augustofg closed 4 months ago
0
Fix release script

#222 augustofg closed 4 months ago
0
Better wording of the workaround needed when upgrading from v1.5.0

#220 augustofg closed 4 months ago
0
Enable voltage and current sensors for AFCv4

#219 augustofg closed 4 months ago
0
Fix clock configuration readback when start on M1 after reset

#218 augustofg closed 6 months ago
0
Update README preparing for v1.6.0 release

#217 gustavosr8 closed 7 months ago
1
Change the TARGET_BOARD_NAME from AFC Timing to AFC v3.1

#216 gustavosr8 closed 8 months ago
1
Dummy handler to receive the I2CSlaveAddr when don't match the IPMBAddr

#215 gustavosr8 closed 8 months ago
2
Fix incorrect clock switch configuration for AFCv3.1 Timing

#214 augustofg closed 6 months ago
0
Handle FMC power good signals

#213 gustavosr8 closed 8 months ago
1
Add support to bootloader self-update

#212 gustavosr8 closed 8 months ago
0
Update bootloader using the firmware update region (self-update)

#211 augustofg closed 8 months ago
1
Increase block_data size to allocate the uploaded firmware block

#210 gustavosr8 closed 8 months ago
2
Remove unnecessary functionality from the Watchdog module

#209 gustavosr8 closed 9 months ago
1
Improve i2c eeprom write functions to only incremend addr if success

#208 gustavosr8 closed 8 months ago
1
Remove unnecessary functionality from the Watchdog module

#207 augustofg closed 9 months ago
0
Set RTM-LAMP ADC CNV retiming clock PLL config to AMC_CLK1 1:1

#206 augustofg closed 9 months ago
1
[RTM] Move 12V turn on/off to AFC specific code

#205 gustavosr8 closed 9 months ago
0
Proper separation of RTM power up and power down responsabilities

#204 augustofg closed 9 months ago
0
Promote some compiler warnings to errors

#203 augustofg closed 4 months ago
0
Rtm presence detection

#202 gustavosr8 closed 9 months ago
1
Change lpc17 i2c driver to accept any size of command in MasterCmdRead

#201 gustavosr8 closed 9 months ago
1
i2c lpcopen library can't address correctly 16 bit addresses on read command

#200 gustavosr8 closed 9 months ago
0
Change delay counts from ticks to ms

#199 gustavosr8 closed 9 months ago
1
Fix the if statement for correctly use the standalone mode

#198 gustavosr8 closed 10 months ago
0
Fix FRU reading / writing operations

#197 gustavosr8 closed 10 months ago
2
Incorrect logic when running in 'standalone mode'

#196 augustofg closed 10 months ago
0
Always write fru info in eeprom

#195 gustavosr8 closed 10 months ago
1
Crash when uploading the firmware in slot 9

#194 gustavosr8 closed 8 months ago
4
Rename error librarie to avoid conflicts

#193 gustavosr8 closed 10 months ago
1
Duplicated error libraries

#192 gustavosr8 closed 10 months ago
0
Modify adn4604 config functions to return error codes

#191 gustavosr8 closed 10 months ago
1
AFCv3 doesn't check success and propagate errors in clock switch configuration

#190 gustavosr8 closed 10 months ago
0
Check if the clock configuration is successfully applied before FPGA_ON

#189 gustavosr8 closed 10 months ago
1
Move the count check to be done after the fru_write call

#188 gustavosr8 closed 10 months ago
1
Only set the clock switch configuration when Payload Power is ON

#187 gustavosr8 closed 10 months ago
1
Clock switch configuration not retained after a FRU shutdown / start cycle

#186 augustofg closed 10 months ago
0
The clock switch configuration should be set only if the FPGA payload power is ON

#185 augustofg closed 10 months ago
0
Change the fru runtime info to AFC v3 instead of AFC Timing

#184 gustavosr8 closed 1 year ago
1
Read i2c address from i2c_chip_rtm_map instead of i2c_chip_map

#183 gustavosr8 closed 1 year ago
1
Move to rtm_check_presence function to board specific directory

#182 gustavosr8 closed 1 year ago
1
Improve AFCv3.1 RTM presence detection workaround

#181 augustofg closed 1 year ago
4
Separate the I2C chip_id map for AFC devices and RTM devices

#180 gustavosr8 closed 1 year ago
0
Separate the I2C chipid map for AFC devices and RTM devices

#179 augustofg closed 1 year ago
0
Add script to set the Serial Number and standardize the other AFCv4 fields

#178 gustavosr8 closed 10 months ago
1
Add suport for xvc probe

#177 gustavosr8 closed 1 year ago
3
AFCv4 stays in M1 state when rebooting the crate, even though the HS handle is pressed

#176 augustofg opened 1 year ago
0
Unifies the firmware for afcv3 bpm and timing

#175 gustavosr8 closed 1 year ago
2