Kristowsa
commented
1 year ago I have similar problem on xr with gt40 mod if I persist it will fire up and work after 3 or 4 attempts No error 16 when I remove gt40
On Mon, 30 Jan 2023, 02:11 TragicTemper, @.***> wrote:
I have two v4 wemos d1 minis, Ive tried both with the latest version OWIE and a few older ones. I can remove them and put the wires back to stock and error 16 goes away. Checked continuity in the harness and nothing gave me problems. Ran around all day without the chip without problems. I double checked the "park" feature wasn't on, and even cycled though it once to verify it wasn't popping on in the stock flash for some reason. I would imagine there isn't a difference in the v3 to the v4 besides the physical printed labeling of the ports. White in from BMS to RX, White out to TX. TX jumped to SDA. Green out from SCL to controller. BMS green closed off. It powers on, It reads the cells fine. It shows signal out to controller. Currently running FW5040 with BMS lock turned off. I have about 15 hours into this, and a bald spot at this point.
— Reply to this email directly, view it on GitHub https://github.com/lolwheel/Owie/issues/67, or unsubscribe https://github.com/notifications/unsubscribe-auth/A4M5OIW43EO5UH73LPU7BOLWU4PLNANCNFSM6AAAAAAUKTEOHI . You are receiving this because you are subscribed to this thread.Message ID: @.***>
I have two v4 wemos d1 minis, Ive tried both with the latest version OWIE and a few older ones. I can remove them and put the wires back to stock and error 16 goes away. Checked continuity in the harness and nothing gave me problems. Ran around all day without the chip without problems. I double checked the "park" feature wasn't on, and even cycled though it once to verify it wasn't popping on in the stock flash for some reason. I would imagine there isn't a difference in the v3 to the v4 besides the physical printed labeling of the ports. White in from BMS to RX, White out to TX. TX jumped to SDA. Green out from SCL to controller. BMS green closed off. It powers on, It reads the cells fine. It shows signal out to controller. Currently running FW5040 with BMS lock turned off. I have about 15 hours into this, and a bald spot at this point.