issues
search
londonhackspace
/
acnode-cl
ACnode using a Connected Launchpad
14
stars
8
forks
source link
issues
Newest
Newest
Most commented
Recently updated
Oldest
Least commented
Least recently updated
refactor: Minor typo corrections & makes commands one click copyable for easier build
#75
darigovresearch
opened
9 months ago
0
Syslog messages are not valid
#74
mich181189
opened
2 years ago
0
Remote Interrogation
#73
mich181189
opened
3 years ago
0
acnode role is rather noisy with announcements
#72
zymurgic
closed
3 years ago
0
Maglock power sense
#71
padski
opened
3 years ago
1
MQTT resilience kinda sucks
#70
mich181189
opened
3 years ago
1
Make networking great again
#69
zymurgic
closed
4 years ago
0
Disable doorbell after card read
#68
mich181189
closed
4 years ago
1
(hardware) Use of TIG welder near a doorbot reader cable run can fake a doorbell input
#67
zymurgic
opened
5 years ago
0
ACServer now supports JSON card responses. Nodes should probably use these
#66
mich181189
closed
4 years ago
1
When launchpad boots without network, it should not give up until reboot
#65
mich181189
opened
5 years ago
1
Unexplained hang of 1st floor dootbot
#64
zymurgic
closed
4 years ago
4
When DNS fails, mqtt (and other things) can cause reboots
#63
mich181189
opened
5 years ago
1
Persistent Cache of Maintainers
#62
mich181189
closed
5 years ago
4
DHCP behaviour needs investigating in various error scenarios
#61
mich181189
closed
5 years ago
5
Fix build instructions
#60
dawidziaja
closed
5 years ago
0
Michael/platformio removal
#59
zymurgic
closed
5 years ago
0
Lasercutter node seems to be VERY chatty on syslog
#58
mich181189
opened
5 years ago
1
acnodes need to fail gracefully in event of network failure to acserver
#57
zymurgic
opened
5 years ago
1
Added the new redesigned PCB
#56
dawidziaja
closed
5 years ago
0
document the 'standard' acnode cat5 remote card reader wiring
#55
zymurgic
closed
6 years ago
0
doorbot bugs when acserver is down meant that uncached cards were treated as good by default.
#54
zymurgic
closed
6 years ago
0
Is this portable?
#53
amunizp
opened
7 years ago
5
Poll the server every minute to determine tool status.
#52
jasiek
closed
5 years ago
4
acnode is stuck in open (green) mode even if the card has been removed
#51
mentarus
opened
8 years ago
0
MicroSD slot on the PCB is the wrong size, needs adjusting.
#50
jasiek
closed
5 years ago
1
Replace the colour coded RGB button with something colour blind friendly
#49
mentarus
opened
8 years ago
4
Better cache verification, perhaps using RTC+TTL
#48
jasiek
closed
5 years ago
1
EEPROM-backed cache fills up and overwrites the configuration
#47
jasiek
closed
5 years ago
2
This migrates the project to PlatformIO.
#46
jasiek
closed
8 years ago
0
Doorbot not updating Card DB
#45
Lexicality
closed
8 years ago
2
Some kind of "lock on" mode?
#44
JasperWallace
opened
8 years ago
0
ACNode acts as a doorbot.
#43
jasiek
closed
8 years ago
0
Front Doorbot showing non-member as having opened the door.
#42
padski
closed
5 years ago
4
embedded ssl library
#41
JasperWallace
opened
8 years ago
0
patch the SD card library with const
#40
JasperWallace
opened
9 years ago
1
watchdog will timeout if no network cable attached
#39
JasperWallace
closed
9 years ago
1
Use NTP for setting the RTC.
#38
JasperWallace
closed
8 years ago
0
toolonpin stuff: warn if tool runs when it's not switched on!
#37
JasperWallace
closed
9 years ago
0
mention PE_4 // toolonpin in the README
#36
JasperWallace
closed
9 years ago
0
Prevent the watchdog from kicking in when filling cache with fake cards.
#35
jasiek
closed
9 years ago
0
Maybe look at some kind of serialisation thing for the settings?
#34
JasperWallace
opened
9 years ago
0
If we do move to an RTOS then NuttX looks interesting.
#33
JasperWallace
opened
9 years ago
0
verify the card cache
#32
JasperWallace
closed
9 years ago
0
toolUse and reportToolUse do the same thing
#31
JasperWallace
closed
9 years ago
0
Add API Key support
#30
JasperWallace
closed
9 years ago
2
Authenticate acnode -> acserver communication using a shared secret
#29
mentarus
closed
8 years ago
0
Add an audit (logging-only) mode.
#28
jasiek
opened
9 years ago
1
check this and merge as needed
#27
JasperWallace
closed
9 years ago
0
trained user who is no longer a member
#26
JasperWallace
closed
5 years ago
2
Next