Open GoogleCodeExporter opened 9 years ago
You can ignore this message - it has no effect:
java.io.FileNotFoundException: debug\debug.bin (The system cannot find the path
specified)
If you are interfacing the Blackfin at a low data rate, SRV1Console.java might
be
timing out in the image transfer. In
trunk/blackfin/console/SRV1Console.java:readLoop(), you could try to change the
timeout limit -
while (pos < frameSize && timeout < 600 && shouldRun) {
if (is.available() <= 0) {
timeout++;
try { Thread.sleep(50); } catch (InterruptedException ie) {}
continue;
}
If you are running a high speed connection via the Matchport WLAN module, then
it's
likely that something is wrong with your Matchport configuration. If restoring
the
Matchport to 2500kbps, here are the appropriate settings -
If restoring the Matchport to 2500kbps, the settings you need to change are:
Expert (5) -
for CPU performance, enter FF
for clk?, enter 81
change MTU Size from 1400 to 1024
skip the rest of the options
Channel 1 Serial (1) -
for Baudrate, enter -1
for divisor, enter 2
for flow control, enter 2
further down, for FlushMode, enter 80
for Pack Cntrl, enter C0
for InterCh Time, enter 3
skip the rest of the options
You will find further discussion of this on the Surveyor Robotics Forum in this
thread -
http://www.surveyor.com/cgi-bin/yabb2/YaBB.pl?num=1200515001
Original comment by surveyorcorp@gmail.com
on 23 Jan 2009 at 3:46
setting match port configuration as below resolved the video issue. Thanks a
lot for
the quick help.
Channel 1 Serial (1) -
for Baudrate, enter -1
for divisor, enter 2
for flow control, enter 2
further down, for FlushMode, enter 80
for Pack Cntrl, enter C0
for InterCh Time, enter 3
skip the rest of the options
--------------------------------------------------------------------------------
-----
Q. new question and your suggestions will be a great help.
I wish to know if anyone is working/has worked on vslam with srv-1 (using single
camera).
I planed to integrate below two software but i have no idea on how to start.
http://code.google.com/p/monoslam/
http://www.ofitselfso.com/SRV1CSharpConsole.php
Original comment by Simha....@gmail.com
on 23 Jan 2009 at 4:40
You might want to post this question on
http://www.surveyor.com/cgi-bin/yabb2/YaBB.pl?board=srv1sw . Though I imagine
there
have been various projects along these lines, I haven't seen any that put the
pieces
together in a single console. Perhaps you can motivate the coordination of some
activity.
Original comment by surveyorcorp@gmail.com
on 23 Jan 2009 at 4:58
Original issue reported on code.google.com by
Simha....@gmail.com
on 23 Jan 2009 at 2:40