search

looxonline / Marlin

This is a customized Marlin repo with firmware for various BIQU 3D printers available. Browse the readme to see if there is something here for you.
http://marlinfw.org
GNU General Public License v3.0
78 stars 18 forks source link

[BUG] Z-Home with Probe doesn't work after a print was canceled #15

Open nicedevil007 opened 3 years ago

nicedevil007 commented 3 years ago

Bug Description

I start a print and cancel it after the printer is printing my objects. Then the printer goes to it "print canceled position" and I start the print again (same gcode).

The printer homes X and Y and starts to home Z => the nozzle is ALWAYS crashing in the bed.

My hotfix for that is to reset the printer with the reset button on the display and start the print again. Then everything is fine. 100% reproducable on my printer. The Z-Endstop is unplugged.

My Configurations

Required: I have installed the Almost Stock firmware.bin from you without any modifications. Oh it is the Biqu BX.

totallynectar commented 1 year ago

Did you ever figure this out? I had this exact issue but now my X home position is off the bed and now the sensor cant read the bed in order to Z home...