search

lora-aprs / LoRa_APRS_iGate

This is a LoRa APRS iGate/Digi based on an ESP32
https://www.lora-aprs.info
MIT License
356 stars 112 forks source link

Destination APLG01, path Type Error Data #276

Closed blacksocket closed 1 year ago

blacksocket commented 1 year ago

Hello,

I have compiled and uploaded the latest firmware and during the start I am getting the error "Destination APLG01, path Type Error Data" like on the below image. Then it can connect to aprs.fi and the Lora Gateway is also visible on the map. However when launch the second device T-Beam v1 board with LORA APRS tracker i can't see any data received by the LORA APRS iGate.

Expected behavior The LORA Tracker should be received by LORA iGate and should be visible in aprs.fi map

Screenshots

Desktop (please complete the following information):

Board name: TTGO T-Beam V1.1 ESP32 433 >> iGate TTGO T-Beam V1.1 ESP32 433 >> Tracker

Additional context

I can't see the LED blinking on my tracker device like below . Maybe it is also related to some issues on tracker side but I can't see any errors there.

https://youtu.be/7rNx44RMTtg?t=1985

image

blacksocket commented 1 year ago

I have found root cause namely there were some connection issues to GPS module. That causing the tracker was not sending the signal. Now it works, so we can close the issue.

videobuff commented 6 months ago

Could you explain more in detail what kind of connection issues and what you did to correct them. Soldering ? I have the same error but iwhen listening on the frequency by a Yeasu FT991A, i do not hear any beacon signals.