Cannot connect TTN Server

[oziesin]

Hi , i am trying to connect my gateway to TTN. I created necessery files like below maybe it was be incomplete.

i created .key files and .trust file by ttn guide.

my station.conf file is this way station.conf { / If slave-X.conf present this acts as default settings / "SX1301_conf": { / Actual channel plan is controlled by server / "lorawan_public": true, / is default / "clksrc": 1, / radio_1 provides clock to concentrator / / path to the SPI device, un-comment if not specified on the command line e.g., RADIODEV=/dev/spidev0.0 / "device": "/dev/spidev0.1",
/ freq/enable provided by LNS - only HW specific settings listed here / "radio_0": { "type": "SX1257", "rssi_offset": -166.0, "tx_enable": true, "antenna_gain": 0 } }, "station_conf": { "log_file": "stderr", / "station.log" / "log_level": "DEBUG", / XDEBUG,DEBUG,VERBOSE,INFO,NOTICE,WARNING,ERROR,CRITICAL / "log_size": 10000000, "log_rotate": 3, "CUPS_RESYNC_INTV": "1s", /"device": "/dev/spidev0.1",/ "radio_init": "rinit.sh", "RADIO_INIT_WAIT": "2s", "RX_POLL_INTV": "10ms", "TC_TIMEOUT": "360s" } } tc.uri file contains wss://eu1.cloud.thethings.network:443

I coppied all files to my device and i run .station and i faced screen below

How could i fix this and connect my gateway to TTN server ?

[beitler]

HTTP status code 403 points to an authentication problem. Did you register your gateway on TTN using the proper gateway EUI (as printed in your logs):

Please consult with TTN as for the reasons of the authentication issue.

[oziesin]

Yes, actually it works with packet forwarder and chirpstack gateway bridge currently, but i wanna transition to basic station.

[beitler]

Closing issue, since this is most probably not a bug. If you have general questions about basic station please use the developer forum.