2 mobile networks + 1 Ethernet network

[GoogleCodeExporter]

What steps will reproduce the problem?
1. I open Netsentry

What is the expected output? What do you see instead?
I should see 1 mobile network (2G/3G) and 1 WiFi. But I see 2 mobile network 
(2G/3G) -> rmnet1 & rmnet0 and 1 Ethernet -> eth0

What version of the product are you using? On what operating system?
Version 1.1.2 of Android Desire with Froyo

Please provide any additional information below.
It would be great if I would see I mobile network to keep track of my 
datausage...

Original issue reported on code.google.com by vandenbe...@gmail.com on 26 Aug 2010 at 6:27

[GoogleCodeExporter]

Thanks Jeroen!

I suspect the second device to be the wifi tethering device, but I don't know 
for sure. I'll have to check this out with the device of a friend of mine. If 
I'm not mistaken, he has a Desire too..

Original comment by Lorenz.F...@gmail.com on 30 Aug 2010 at 7:45

[GoogleCodeExporter]

I have HTC desire 2.2 with netsentry 1.2.2

When I use my mobile connection, rmnet0 and rmnet1 change (I don't know why I 
have 2). When I use wifi, eth0 changes. And using tethering it is wl0.1

Thanks for your work!

Original comment by juan.alm...@gmail.com on 24 Nov 2010 at 5:22

[GoogleCodeExporter]

I've got the same problem with my HTC Desire 2.2. Two 2G/3G Networks (rmnet0 
and 1).

Original comment by reklaw...@gmail.com on 23 Feb 2011 at 11:12

[GoogleCodeExporter]

Any updates to this? I also a little bit confused about that interfaces ending 
with 1

Original comment by mail.mic...@gmail.com on 13 May 2011 at 11:41

[GoogleCodeExporter]

Inbetween I'm puzzled with regard to the 3 Interfaces
Ethernet as display shows is definitely WiFi
svnet0 with a ?mark seems to be HDSPA or 3 G
pdp? as I'm not using tethering at all could traffic to/from
laptop example KIES with my Galaxy S2 i9100 but I'm not sure anymore abpout this
is there an update on the way wiping out the ?marks and gives input what is 
svnet0 and pdp0 in real
appreciate hints to this

Original comment by guenther...@gmail.com on 9 Jun 2011 at 8:06

[GoogleCodeExporter]

i have only used my personal WIFI and see Svnet0 and ethernet with both 12mb 
data
Im puzzeled that there is no good answer .... if this is WIFI or 3g. 
since imo when i have wifi on, why the F does the phone use the 3G network? 
than why i have WIFO i might be a tard....
i see nowhere a normal answer
might log into vodafone 2morrow and see what my data usage is :S

Original comment by mizzyj...@gmail.com on 10 Aug 2011 at 10:24

[GoogleCodeExporter]

Hi, greeting all I'm from Australia.
I think i have the same problem, I'm using samsung galaxy s2 normally there is 
Ethernet(Wifi) and pdp0(3G) but now there is svnet0?. It seem to be eating my 
DATA even though I have APN On/OFF enable so that I only used WIFI at home, not 
Both 3G and WIFI at the same time.
What is svnet0?
Thank You For Reading.

Original comment by xXSoulCa...@gmail.com on 14 Aug 2011 at 12:12

[GoogleCodeExporter]

I have the opposite problem. I WANT BOTH interfaces to remain on. I will turn 
on or off the wiring or 3g when I want. I don't want one to shut off when the 
other is turned on. How can I keep both interfaces up?
Samsung Galaxy, Vibrant. 2.1-update

Original comment by justin.r...@gmail.com on 2 Dec 2011 at 6:15