Open ThEnGI opened 1 year ago
That's indirectly a script issue (see #42 ).
ffmpeg can hang when network issues occur or so. Actually there is nothing implemented which communicates to ffmpeg and check if it's crashed or stuck. Only if it's just stuck it could be possible to bring it down cleanly.
You can try to use untrunc. Take a working video of the same model as working video and the corrupted video. Eventually you have luck that it restores the file.
OK, as always fast and clear. Untrunc works well, not the best solution....but it works If the FFMPEG task is active, the bot doesn't open another one, right? So if there are any streams in between they are lost
As i said before, is there any way to force close FFMPEG after x seconds? (as ffmpeg command) In theory at that point the bot does not see the recording in progress and start a new one.
I would like to avoid a script that restarts the server every time it loses the connection :-)
I don't know whats planned here in future.
The bot will not recognize that ffmpeg stucks or hangs.
def execute():
try:
process = subprocess.Popen(args=cmd, stdin=subprocess.PIPE, stderr=subprocess.DEVNULL, stdout=subprocess.DEVNULL)
except OSError as e:
if e.errno == errno.ENOENT:
self.logger.error('FFMpeg executable not found!')
return
else:
raise
As you can see the process is spawned with output but it's piped to /dev/null.
The whole thingw ould be need to be refactored in a way that the output of the process is parsed. As far as I know ffmpeg also can open a things like UNIX Sockets for communication.
How every the code need the have mchanism to monitor the subprocess. It would be possible to implement something like a stop after 1 hour. But I think this wouldn't help much. As described in the other issue: It's totally needed to have really stable and clear connectivity. I think it would be needed to define conditions when FFmpeg is considered as stuck or hanging and then tried to be stopped gracefully and eventually killed after that. You will never have a real possibility to prevent the need of untruncing as long as you not download as MPEG-TS. MPEG-TS is playable always unimportant how ffmpeg is killed. An architecture with a Downloader and a Post Processor component would be better I think.
Therefore, if I understand correctly: at each disconnection I "lose" all the streams, FFMPEG does not close and I have to kill it (getting the truncated videos). At this point If i write a script that if it detects no connection it executes "killall ffmpeg", The streams started before the disconnection are already "lost" by doing so I don't lose those on reconnection,it's right ? or do I have to restart the script as well? It's not the best of solutions, but it's the one that limits the damage (also the only one in my capacity)
The Bot wouldn't recognize when the ffmpeg process is killed ans so doens't check the state further. You could test this in a seperate installation and simply kill it away and check whether the status of the job changes (I don't think so).
I think the big issue here is that ffmpeg get's in problematic states when e.g. DSL reconnects or the stream closes uncleanly or something like that. ffmpeg is really sensible when ripping a stream.
Switching to MPEG-TS wouldn't change this. The code would need to be refactored in a way that status checking, downloading and postprocessing are seperate tasks. So that you can do things like: I saw model x is only, starting a download job, when I recognize ffmpeg stucks or hangs bring it down (in parallel further check the model state and check if the dl job still runs) and finally doing post processing so make sure there is a working file for that. So the code needs to be more modular and cooperative.
I think you would need to bring down the whole Downloader, search for all ffmpegs bring the hanging ones down and restart. The other only way would be an external box with good IP connection so in fact a question of money. When the problem here still occures it also would need further investigation.
I think you would need to bring down the whole Downloader, search for all ffmpegs bring the hanging ones down and restart. The other only way would be an external box with good IP connection so in fact a question of money.
That's what I'll do, Downloader.py stop -> kill all ffmpeg -> Kill downloader -> Restart downloader Since the connection drop "just" 1 time a week, is not a big deal.
If i had to spend the money i would go for a better script since my internet connection is not improvable. Or simply pay to record the cams and make them available for streaming
I'm in a rich country with a third world connection.
Thanks again
I would change to MPEG-TS.
Then you can stop the Downloader and kill all ffmpegs. You then can do a post processing by converting the files from MPEG-TS to MP4 and fix corrupted stuff if necessary. Should be possible to do this with a bit Python magic. MPEG-TS doesn't corrupt like MP4 so you can do the stop, move and restart and after that do the conversion stuff.
I know the connection issues in some places of the world. You should be able to find something with a Xeon CPU, 32GB RAM, 8TB disk space on a 100mbit sync line with static IP for around 40 €. It's a question of money and how much you want to pay for recording womans in front of a camera.
Forgot: Wireless LAN and Powerline are also crap for something like StreaMonitor. Everything needs to be wired well.
Wifi only for smartphones.Server and PCs via Gigabit LAN. The problem is the isp disconnection. it rarely happens but it does happen. For about 10$ there is a streaming recording service, I don't need a 40$ server, also because then I wouldn't know what to do with it. The goal is not to pay
Then you should switch to MPEG-TS, take the smallest possible resolutions and build a good wrapper around everything.
Then this should be good. I would use separate UNIX box. Windows really isn't the platform for StreaMonitor.
Edit: I see it's a Debian you have. That's fine.
You treat me like a person who knows what you're talking about, i know very little about pyhton (C much better). Now I just have to choose whether to do the procedure by hand or do it via script. (open/close is the best I know how to program XD). Do you think it's better: first "Downloader.py stop" and then Kill FFMPEG. or viceversa ? In the first case it should stop the streams still in progress, right?
I think you should do the following:
You will not be able to stop the Downloader in an easy way that will safely keep running streams. So you would make sure that killing Downloader.py doesn't kill spawned childs and then need to inspect whether ffmpeg is hanging or crashed and just kill hanging or crashed ones. I think that's a complex task.
MPEG-TS should just need conversion. Also a hard kill should give a convertable working MPEG-TS file. You can verify truncation with mediainfo. There is a library binding for mediainfo which uses the library directly. It should be possible to write a test for a truncated file.
The above also could be done with all other Languages like Bash, Ruby, Go or which ever you like. When someone is able to read or write C Python is a really simple thing. And in general helpful for fast software development and system automation.
It happened again, SIGTERM doesn't work, I have to use Kill -9 PID. I didn't read your post well, so I've used "quit" in CLI, all but one FFMPEG task stopped. The script waited, i killed the last FFMPEG and then killed the script (was "stuck"). Then i restarted everything I didn't check which stream was blocked, but the others seem to have stopped correctly. Next time I'll try to do as you say !
I use TMUX to run the script,I could send CLI commands through TMUX. I can't see the result, but i can wait x seconds and then proceed with the script. To your knowledge does: "Controller.py Stop * " work or do I have to close one stream at a time?
That seems to be plausible.
thread = Thread(target=execute)
thread.start()
The downloader thread (all is threaded in the script) isn't a deamon. So the main process will stuck until the thread is stopped (also called an attached thread). Because ffmpeg isn't reacting to SIGTERM this indicates a crashed ffmpeg process. So just SIGKILL will bring it down. The fact that you could stop the other stuff indicates that the script doesn't have the biggest problem with a dead thread. There is no handling for dead threads in the script. Also it would need investigation to check whether the thread died or just the subprocess. If the thread is still is alive there would be a possiblity to handle this situation in the thread and bring ffmpeg down with SIGKILL. Eventually it's nneded to have monitoring thread.
The problem in general is that threads aren't the way for I/O stuff. For that the asynchronous approach is much better today. Threads were designed for CPU bound stuff. SteaMonitor is hard I/O bound. It always waits for the network or slwo hard disks to do something.
In fact with tmux or screen there should be ways to inject keyboard input to the session/window. You could also use this and check whether you can figure out output. Eventually you are partially blind in your cleanup script when you choose this way.
If you are on the latest code state the stop command supports the asterisk. So in CLI as well as in Controller.py you should be able to do stop *
which should stop all threads (bring them to state "Not running"). A died thread wouldn't react to this I think. You could try to build something which does list before and after the stop command and check the differences.
There is no well defined protocol which leads to the fact that ZeroMQ communication needs real parsing work to parse the list command output. Sadly you can't simply write something which checks stuff via sending and getting a bit JSON or so.
Killing Downloader.py directly leaves ffmpeg subprocesses alive, So I will do as above (Kill FFmpeg and then Downloader.py). Every time the connection is interrupted, all the streams (5/6) crash. Doing the analysis you suggested is too expensive. Since it's all for personal use and I don't have to make money on it, losing a few streams doesn't matter. If the interest is high I can recover the part before the crash with "untrunc"
If you want to give me a perfectly functional script (3rd word internet proof) for Christmas, I gladly accept it XD Before I do anything concrete it will already be next year
The reason now is clear.
If the still running ffmpegs stay alive after closing Downloader.py the subprocess spawning seems not to be influenced by the Thread type. So the subprocess seems not to be depending on the thread it spawns.
I think it's better to kill Downlaoder.py, sending SIGTERM to ffmpeg, wait for a moment and then sending SIGKILL. So alive processes have the chance to shutdown cleanly. It would need a verification whether the inverted way could bring Downlaoder.py gets in a state where it's crashing still alive subprocesses. So to stop ffmpeg's first could produce more problems.
You could also try sending SIGTERM and check if the script behaves like a normal stream end. If that's the case you could send SIGTERM, wait, kill Downloader and dead ffmpeg's in one step. Because Downloader.py reacts to SIGTERM you can also SIGTERM Downlaoder.py in a further step.
I think the situation is that special that it's to much work to build a tool to handle this. As told the software needs a really good connected environment. So it's a thing which need to be calculated at home lines.
small update: Downloader.py quit ->script stopped -> Killall -9 ffmpeg -> script closed correctly (corrupted files, obviously) If it happens again (definitely), I will try sigterm first. The "quit" is not enough to bring down the "half healthy" tasks? do you think it's better to try a sigterm anyway ?
If quit command leads to a stop (Downloader.py doesn't leave to prompt) that indicates it hangs.
That's because of the above described fact that Threads have tow modes. We have someting like this:
Downlaoder.py (threaded main process) -> Manager Thread --> Model Thread ---> Downloader Thread ----> ffmpeg Subprocess
Formally the above is wrong because Threds have no childs in that sense so Manager, Model and Downlaoder Threads run within the main process (threads are like "thin" processes within a process). Just the ffmpeg Subprocess is a new process (Threads as well as processes can spawn processes).
As long as Threads are attached the main process just leaves when all Threds are completed. So it depends how the behaviour looks like for the thread which spawned the subprocess. The thread should just stop when the subprocess ends. Because ffmpeg crashes the thread could be a live but stuck or also the thread is crashed (dead). The fact that sending SIGKILL to all ffmpeg's leads to the end of the Downlaoder.py process that for me indicates that the klling of the subprocess gives something to the Downloader Thread that tells him to run further. So I think the Downloader Thread itself is still alive.
-9 for kill/killall is a SIGKILL. A really crashed ffmpeg reacts to nothing so only SIGKILL will end it from the kernel side. A still alive one will react to SIGTERM. Dead ones shouldn't be harmed by SIGTERM. So a SIGTERM shouldn't give you a lose. You could simply count the ffmpeg's and see which ones were alive.
Because the Downloader.py just quits after killall -9 it's clear that it hangs in quit command until the subprocesses are gone.
As a short idea which eventually help:
The code spawns ffmpeg in a really naiv way. The CLI has something like -retries, -retries-fragment and -reconnect and further -reconnect_* things.
You could try a bit around with that. Eventually this triggers stuff in the ffmpeg code which stops hanging. It's possible that the CLI (ffmpeg command line tool) uses a really silly technique by default. It's just the wrapper tool for the libav* stack so the libs obviously can more. Check the ffmpeg website for that. The man page and some other resources are full of holes. So there are options just documented in the full documentation at website.
I investigated a bit.
I would sugget something like this:
ffmpeg -user-agent agent -reconnect 1 -reconnect_on_entwork_error 1 -reconnect_streamed 1 -reconnect_delay_max 60 -i url -c:a copy -c:v copy filename
-reconnect meas enable reconnection -reconnect_on_entwork_error meas if network fails reconnect -reconnect_streamed means also reconnect at non seekable (should mean aspecially live streams) -reconnect_delay_max means give up after x seconds.
This should lead to the following: The stream gets written, if connection get's lost for let's say 20 seconds and reconnect is successful it will proceed recording at the point where the stream is after reconnect. The 20 seconds will be missing in the ending file. Reconnection tries get stopped after 1 minute and ffmpeg should quit.
For StreaMonitor this could look like a normal stream end which triggers status checking again.
The cmd list would look like this (in ffmpeg.py in downloaders folder):
cmd = [
'ffmpeg',
'-user_agent', self.headers['User-Agent'],
'-reconnect', '1',
'-reconnect_on_network_error', '1',
'-reconnect_streamed', '1',
'-reconnect_delay_max', '60',
'-i', url,
'-c:a', 'copy',
'-c:v', 'copy',
filename
]
See this in ffmpeg documentation.
Use at own risk.
This error returns:
Traceback (most recent call last):
File "/usr/lib/python3.9/threading.py", line 954, in _bootstrap_inner
self.run()
File "/usr/lib/python3.9/threading.py", line 892, in run
self._target(*self._args, **self._kwargs)
File "/home/XXXXX/StreaMonitor/streamonitor/downloaders/ffmpeg.py", line 49, in execute
raise
RuntimeError: No active exception to reraise
Line 49 (after the addition)
if process.returncode and process.returncode != 0 and process.returncode != 255: raise
Am I wrong or does it give me an error in the line where it checks that the registration has started?
i'm not sure but the script is looking for something to return
Don't worry, before making any changes I make a backup of the script
Best regards
This raises an exception when ffmpeg fails to start.
The concret error is related to the fact that the code has no exception types. So it looses the exception chain.
Check your ffmpeg version. If it's an Debian Stable (Bullseye) it could be incompatible with the mentioned options (Bullseye has 4.3.5). You need at least 4.4.1.
So I think this occures because ffmpeg has an option error.
Check here for debian pkgs and here for static builds
I messed something up with ffmpeg now even the orignal script doesn't work, I'll look into it tomorrow
Good night
Installed newest FFMPEG, ffmpeg -version return:
ffmpeg version 5.1.2
But now I get this error even without the change:
Traceback (most recent call last):
File "/usr/lib/python3.9/threading.py", line 954, in _bootstrap_inner
self.run()
File "/usr/lib/python3.9/threading.py", line 892, in run
self._target(*self._args, **self._kwargs)
File "/home/xxxx/StreaMonitor/streamonitor/downloaders/ffmpeg.py", line 45, in execute
raise
RuntimeError: No active exception to reraise
Thinking it was my coding error I also used the backup, but nothing
WTF is hapening ?
Use this to try to download a Bongacams stream.
bc.py modelname
This should show what ffmpeg is doing.
Compilation error: https protocol not found, recompile FFmpeg with openssl, gnutls or securetransport enabled. Recompiled now the script started working again. The "reconnect" function continues to give raise errors.
Sorry but i'm too used to using "apt install"
Modify the bc.py to use the command with reconnect options to see what fails then. Eventually the http protocol has a further build option to support this feature.
Unrecognized option 'reconnect_at_network_error'. Without this option it works (bc.py)
-reconnect_on_network_error 1
-reconnect_on_network_error 1
Done and it need "," between "-reconnect_delay_max" and "60" It seems to work, let's wait a couple of day (aka after christmas, but before next year XD )
Thanks !!!!
-reconnect_on_network_error 1
Done and it need "," between "-reconnect_delay_max" and "60" It seems to work, let's wait a couple of day (aka after christmas, but before next year XD )
Thanks !!!!
Yeah the list were corrupted also. Fixed also this above.
Yep. Now we need to wait whether there will be some homeless/stalled ffmpegs in future.
Yep. Now we need to wait whether there will be some homeless/stalled ffmpegs in future.
Nothing, it seems that the change does not work. however, before drawing conclusions, let's wait a few more days.
Sending Sigterm twice via gui (Webmin) and wait like 10 sec seems to the close ffmpeg task but not properly (file corrupted), this also need more testing
Nothing, ffmpeg hangs even with the new parameters. Patience will mean that I will have to live with it "Killall -term ffmpeg" twice work, dont know why. All cams (some more, some less) create multiple files per stream,I'm trying to create a way of compacting all files (ffmpeg's concat).
You could try to write a logfile for every job and check whether this gives something.
Sending ffmpeg a SIGTERM twice could indicate two things:
It would be possible to monitor ffmpeg and the output file. Writing MPEG-TS helps here. ffmpeg can be killed with SIGKILL and the file doesn't corrupt. To have it nice a post process would be needed to make a real MP4. So it would be possible to simply close ffmpeg's automatically if the file doesn't changes for a while. Eventually logging/output also could be parsed for something that indicates stalled mode/meditation.
Eventually @lossless1024 makes the Downloader more intelligent to monitor ffmpeg.
A brutal way of doing it: https://til.yulrizka.com/unix/ffmpeg-monitor-and-restart-stream-when-it-hung-or-stall Some way to have a log from the script would help!
@lossless1024 where are you?
bye
You could also play around a bit with -reconnect_on_eof
, -reconnect_on_http_error
and -multiple_requests
Check the documentation for that.
Eventually the internal network leads to the fact that ffmpeg doesn't react to network errors as expected. Eventually timeouts are to high. HTTP implementation seems to have no timeout option. Due to the fact that HLS a splitted thing ffmpeg always reopens connections by request. The -multiple_requests
options leads to a persistent connection when set to 1. This could lead to a better recognition on reconnects.
-report -loglevel debug
should lead dto a logfile in the working dir of ffmpeg with everything included.
-reconnect_on_eof`
This gives me problems, with the option enabled the script doesn't work.
LINK , can it help us?
Check with the Bongacams Script which we used befor what's the problem here. Use it as command generator to test around a bit.
We need to find out what's happening in ffmpeg and why it does nothing after this event.
Also better monitoring of the running processes would be needed. The alternative would be to code againt libav stack directly. This would give the most control I think.
To simulate the connection interruption I find myself better working on windows, does it change anything? (obviously after installing everything) I don't understand where the -report command generates the file? Something like ffmpeg ... >log.txt 2>&1 ??
Using this ? -shortest (output)
Sorry, I've been very busy in the past few weeks. I'll check this ASAP Also I've added debugging support in the latest commits. You can turn it on in the parameters.py by setting DEBUG to True. It saves the ffmpeg output for each file.
-report
should save the log in the working directory.
Use IPTables/NFTables to block the connection and check how ffmpeg behaves. For ffmpeg this should look like a network drop. Aspecially the Windows Adapter Disabling could lead to other effects because the eventually the network as a subsystem disappears for ffmpeg.
Setting debug should give you now filename.stdout.log and filename.stderr.log.
But debugging the ffmpeg behaviour in StreaMonitor is a bit tricky. It's mostly easier to have a script which spawns it with the decided parameters and then check directly what it dows at a certain event. When it's figured out there what's happening it can be verified for StreaMonitor and handled there.
Sorry, I've been very busy in the past few weeks.
Don't worry, everyone was busy at Christmas Can you add resolution management support? #23 I don't think @DerBunteBall gets offended if you use his version of the code, he's being modest saying it's bad/horrible/"not worthy of love" but it works! If you can implement it all together, I can test it.
Stupid question: can I launch the script twice in different folders?
@DerBunteBall I try this new implementation with the debug function, if we can't achieve the goal I will try with "-report"
Happy New Year
@lossless1024 Updated and running, just wait a few day to get some log You've outdone yourself in managing the stream resolution !
Thanks !
[hls @ 0x559c20919580] Skip ('#EXT-X-VERSION:4') [hls @ 0x559c20919580] Skip ('#EXT-X-DISCONTINUITY-SEQUENCE:0') [hls @ 0x559c20919580] Skip ('#EXT-X-PROGRAM-DATE-TIME:2023-01-03T18:01:59.595+00:00') [https @ 0x559c20a77480] Opening 'https://edge5-mad.live.mmcdn.com/live-hls/amlst:XXXX-sd-61d62428729a7baf0f20a6ec518d3a20acfa51e5db2e3ffde09f1fae7588bdaf_trns_h264/media_w1464779271_b1148000_t64RlBTOjMwLjA=_6754.ts' for reading frame=257399 fps= 28 q=-1.0 size= 1080576kB time=02:32:08.02 bitrate= 969.8kbits/s speed=0.992x
[https @ 0x559c20975d80] Opening 'https://edge5-mad.live.mmcdn.com/live-hls/amlst:XXXX-sd-61d62428729a7baf0f20a6ec518d3a20acfa51e5db2e3ffde09f1fae7588bdaf_trns_h264/chunklist_w1464779271_b1148000_t64RlBTOjMwLjA=.m3u8' for reading [hls @ 0x559c20919580] Skip ('#EXT-X-VERSION:4') [hls @ 0x559c20919580] Skip ('#EXT-X-DISCONTINUITY-SEQUENCE:0') [hls @ 0x559c20919580] Skip ('#EXT-X-PROGRAM-DATE-TIME:2023-01-03T18:01:59.595+00:00') [https @ 0x559c20975d80] Opening 'https://edge5-mad.live.mmcdn.com/live-hls/amlst:XXXX-sd-61d62428729a7baf0f20a6ec518d3a20acfa51e5db2e3ffde09f1fae7588bdaf_trns_h264/chunklist_w1464779271_b1148000_t64RlBTOjMwLjA=.m3u8' for reading Error writing trailer of downloads/XXXX [CB]/XXXX-20230103-162835.mp4: Immediate exit requested frame=257443 fps=3.7 q=-1.0 Lsize= 1080832kB time=02:32:09.68 bitrate= 969.8kbits/s speed=0.13x
video:1030369kB audio:53397kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: unknown Error closing file downloads/XXXX [CB]/XXXX-20230103-162835.mp4: Immediate exit requested Exiting normally, received signal 15.
when killing twice with sigterm
[hls @ 0x56465c0ed580] Skip ('#EXT-X-VERSION:4') [hls @ 0x56465c0ed580] Skip ('#EXT-X-DISCONTINUITY-SEQUENCE:0') [hls @ 0x56465c0ed580] Skip ('#EXT-X-PROGRAM-DATE-TIME:2023-01-03T17:27:18.372+00:00') [https @ 0x56465c11dec0] Opening 'https://edge9-mad.live.mmcdn.com/live-hls/amlst:XXXX-sd-456552fdeefcc83b25c513b64d23d973813006cbed279a7fe6cb02db76f46790_trns_h264/media_w214222058_b1148000_t64RlBTOjMwLjA=_12279.ts' for reading [https @ 0x56465c149d80] Opening 'https://edge9-mad.live.mmcdn.com/live-hls/amlst:XXXX-sd-456552fdeefcc83b25c513b64d23d973813006cbed279a7fe6cb02db76f46790_trns_h264/media_w214222058_b1148000_t64RlBTOjMwLjA=_12280.ts' for reading frame=77464 fps= 29 q=-1.0 size= 315136kB time=00:44:07.53 bitrate= 975.1kbits/s speed= 1x
[https @ 0x56465c11dec0] Opening 'https://edge9-mad.live.mmcdn.com/live-hls/amlst:XXXX-sd-456552fdeefcc83b25c513b64d23d973813006cbed279a7fe6cb02db76f46790_trns_h264/media_w214222058_b1148000_t64RlBTOjMwLjA=_12281.ts' for reading [https @ 0x56465c1d9080] Opening 'https://edge9-mad.live.mmcdn.com/live-hls/amlst:XXXX-sd-456552fdeefcc83b25c513b64d23d973813006cbed279a7fe6cb02db76f46790_trns_h264/chunklist_w214222058_b1148000_t64RlBTOjMwLjA=.m3u8' for reading [hls @ 0x56465c0ed580] Skip ('#EXT-X-VERSION:4') [hls @ 0x56465c0ed580] Skip ('#EXT-X-DISCONTINUITY-SEQUENCE:0') [hls @ 0x56465c0ed580] Skip ('#EXT-X-PROGRAM-DATE-TIME:2023-01-03T17:27:19.944+00:00') [https @ 0x56465c11dec0] Opening 'https://edge9-mad.live.mmcdn.com/live-hls/amlst:XXXX-sd-456552fdeefcc83b25c513b64d23d973813006cbed279a7fe6cb02db76f46790_trns_h264/media_w214222058_b1148000_t64RlBTOjMwLjA=_12282.ts' for reading frame=77600 fps= 29 q=-1.0 size= 315648kB time=00:44:12.05 bitrate= 975.0kbits/s speed= 1x
[https @ 0x56465c1d9080] Opening 'https://edge9-mad.live.mmcdn.com/live-hls/amlst:XXXX-sd-456552fdeefcc83b25c513b64d23d973813006cbed279a7fe6cb02db76f46790_trns_h264/chunklist_w214222058_b1148000_t64RlBTOjMwLjA=.m3u8' for reading
when killing with -9 (kill)
They are different cams
We now know two things:
What hapepns when SIGTERM is only send once? The question would be why it doesn't exit when it gets SIGTERM but still is alive.
When you need the connection to hang, everything works fine :-( Stdout is useless to monitor, it is always empty As soon as it happens I will try to send "term" only once and see how it reacts
I will try to send "term" only once and see how it reacts
Nothing happens, that's what happens. I also waited for 5 minutes, but ffmpeg seemed to die (no log output) until the second 'SIGTERM', at which point the file becomes corrupted.
I will try to send "term" only once and see how it reacts
Nothing happens, that's what happens. I also waited for 5 minutes, but ffmpeg seemed to die (no log output) until the second 'SIGTERM', at which point the file becomes corrupted.
I am suffering same situation. Now I restart mannually. Wait for better solution.
I noticed that FFMPEG doesn't close tasks even after many days. Also when I stop the script (ctrl-c or quit ) it remains pending as if waiting for all streams (ffmpeg task) to finish. Forcing me to kill everything. After this some files remain unreadable, for example the 12 day old stream. (Which I assume is finished)
Is a FFMPEG problem or a script problem ?
Should we add a "-t 01:00:00" and limit to 1 hour file ? or something to force the connection down and wait for the bot to restart the download(i dont mind loosing 1 minute of stream)
How to recover "damaged" files ?Do I have to re-encode ?
I add that there have been some internet connection drops, but like 1 every 2/3 days, it's hard to trace whether it's their fault
Thanks in advance ThEnGi