Closed Tukker2021 closed 10 months ago
Even after installing the a test version 0.2.2 where you can switch between miles and km, there is no change in the behavior https://homey.app/en-nl/app/com.rexwel.bmwconnected/BMW-Connected/test/
As mentioned in https://github.com/lsiddiquee/com.rexwel.bmwconnected/issues/35#issuecomment-1829354026, did you drive to a different location and armed the alarm and waited for the polling to be completed? You can probably use one of the following trigger to ensure that the status was updated after change of the location.
I have followed your instructions, but I still do not get the option to select "Location Changed" or "Geo-fence - Enter" or "Geo-fence - Exit" as the download page suggests:https://homey.app/en-nl/app/com.rexwel.bmwconnected/BMW-Connected/test/
I did drove my vehicle to outside my geo-fence, then locked it and left it there for 30 minutes. I have the following flows to check for any changes, and although I did got some notification "BMW Alarm went true" there is no change in the Location or Geo-Fence features being enabled.
Neither do the other options (e.g. vehicle locked) have a label that can be used to test the location. So there is no way I can check for the vehicle to be at home or at any other location!
So basically the IF Location Changed card is missing, would installing the official version of the app make a difference? https://homey.app/en-us/app/com.rexwel.bmwconnected/BMW-Connected/
Should not. I will push a new test version with some change to see if that helps later. Will post an update once done.
Any update on a version that does have the location or geo-fence cards available again?
@Tukker2021 I have removed the filter for now, can you try the latest version and see if that gives you the cards?
Hello,Yes, the cards are now visible, I will test them.Met vriendelijke groetenRick Stroot————————————Op 8 jan 2024 om 11:04 heeft Likhan Siddiquee @.***> het volgende geschreven: @Tukker2021 I have removed the filter for now, can you try the latest version and see if that gives you the cards?
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: @.***>
Hello,
When I create a flow and try to use the location or geofencing as a condition this is not possible, as those options are not available: