search

luc-github / ESP3D

FW for ESP8266/ESP8285/ESP32 used with 3D printer
GNU General Public License v3.0
1.78k stars 466 forks source link

[FEATURE REQUEST]Add ESP32-Cam board to the 2.1.x #1040

Closed amirzohaib closed 3 months ago

amirzohaib commented 3 months ago

Is your feature request related to a problem? Please describe. Using Platform IO, there are only a few options, ESP32 dev, ESP8266..etc but there should be esp32cam Just like in Beta 3.0x

Why not use the new 3? well you removed the only feature worth going through the trouble of adding WIFI to an old Printer = send STL files via WIFI to the printer.

i know, it was slow, but i am lazy and willing to let it take its time uploading STLs wirelessly. instead of running around pulling SD cards.

Describe the solution you'd like

Either add esp32cam to old 2.1x version, or add ability to send stl files via Wifi in 3.0x

Describe alternatives you've considered

hardwiring to exisitng SD card on printer

Additional context

configure.h comments are sometimes not undesrstandable and confusing

github-actions[bot] commented 3 months ago

Thank your for submiting, please be sure you followed template or your issue may be dismissed. if you deleted the template it is here

luc-github commented 3 months ago

please read https://esp3d.io I am sure you will find some information about SD card support in 3.0 it is not because M28/M29 protocol is dropped there is no SD Card support and because configuration.h is now complex there is a configurator for it.

Code of 3.0 is totaly different than 2.1X so backporting a feature will be painful but you can do if you want I have no time for that sorry and as you i am lazy

amirzohaib commented 3 months ago

Its okay we are all Lazy haha

please read https://esp3d.io I am sure you will find some information about SD card support in 3.0 it is not because M28/M29 protocol is dropped there is no SD Card support and because configuration.h is now complex there is a configurator for it.

i have used the configurator and enabled the SD card..etc but there is no upload button on the 3.0xUI

luc-github commented 3 months ago

what SD card do expect to use for upload ? The supported ones : https://esp3d.io/esp3d/v3.x/documentation/sdtransfer/index.html

github-actions[bot] commented 3 months ago

This issue has been automatically locked since there has not been any recent activity after it was closed. Please open a new issue for related bugs.