search

luc-github / Repetier-Firmware-4-Davinci

Repetier-Firmware-0.92 based for DaVinci printer (Beta - so far so good)
GNU General Public License v3.0
194 stars 98 forks source link

Davinci 2.0 Duo, cant quite get it to work. #195

Closed Seiler270 closed 8 years ago

Seiler270 commented 8 years ago

Im trying to flash via the directions here:

https://github.com/luc-github/Repetier-Firmware-0.92

Im a bit confused by step 4:

""""Update variants.cpp arduino file with the one present in src\ArduinoDUE\AdditionalArduinoFile according your IDE version""""

Ok so i can find the variant.cpp file in the repetier folder Lacated

C:xxxxxxxxxxxxx\Repetier-Firmware-0.92-master\src\ArduinoDUE\AdditionalArduinoFiles\Arduino - 1.6.9 -Due 1.6.8\Arduino15\packages\arduino\hardware\sam\1.6.8\variants\arduino_due_x

The issue is, where to I place it in the Ardino program group?

C:\Program Files (x86)\Arduino\hardware\arduino\avr\variants does not contain a variant.cpp files..

so where does it go?

I tried skipping the step, and continuing on and everything goes along as it should but after the firmware upload and the reboot i get nothing, its not even recognized by windows after that. I have to jumper J37 and start over.

Thanks for any help!

luc-github commented 8 years ago

ha finally 2 and not 3 = fuse issue no LCD and no extruder are the consequences

Seiler270 commented 8 years ago

well thats GREAT news... so... where is the fuse? hahahahaha

luc-github commented 8 years ago

read this https://forum.voltivo.com/showthread.php?tid=8498&highlight=lcd

and the previous one I gave you : https://forum.voltivo.com/showthread.php?tid=8517&highlight=extruder

luc-github commented 8 years ago

for hardware issue I suggest to post to forum voltivo or soliforum to get help as I am not electronician and not best person to help on this

Seiler270 commented 8 years ago

looks like I just need to solder j4 shut, looked up a video of it, seems simple enough.

Ill do that real fast and we will see what we have.

luc-github commented 8 years ago

Ok good luck

Seiler270 commented 8 years ago

Looks like I need a new motherboard.

Im not getting 12v reaching JP4, so its not a issue of that resistor being blown, its a matter of it not getting voltage at all in the first place.

i guess Ill see what xyz says.

luc-github commented 8 years ago

sorry for you - Davinci is very fragile and easy to get shorts

luc-github commented 8 years ago

if no update I close issue