search

luc-github / Repetier-Firmware-4-Davinci

Repetier-Firmware-0.92 based for DaVinci printer (Beta - so far so good)
GNU General Public License v3.0
194 stars 98 forks source link

bed level keeps dropping #268

Closed netpipe closed 7 years ago

netpipe commented 7 years ago

im having issues with the davinci saying 620 deg then it goes to def and im unable to move anything unless done from the menu. the problem is the bed level keeps dropping when the unit comes on and then eventually bottoms out and keeps trying to go down further.

luc-github commented 7 years ago

davinci saying 620 deg looks like sensor issue

luc-github commented 7 years ago

which version of Fw do you use?

netpipe commented 7 years ago

i got the sensor issue fixed, the bed is fine now but , it would also be nice to disable the "no movement when sensor not coupled issue" so that i can use laser or dremmel to do the work. it was 0.92.10m

netpipe commented 7 years ago

i got the sensor issue fixed, the bed is fine now but , it would also be nice to disable the "no movement when sensor not coupled issue" so that i can use laser or dremmel to do the work. it was 0.92.10m

netpipe commented 7 years ago

also when changing filament i have to reboot machine manually if the change filament error comes up and trying to load it in using pronterface. it would be nice if i pressed the home button it would let me extrude still. it would be nice to have a bypass option on both sensors to do dremmel work with no hotend at all if it decides to crap out.

luc-github commented 7 years ago

to use Davinci as cnc you must compile fw accordingly but I never tested, it is somewhere in configuration.h look for current setting PRINTER_MODE_FFF

luc-github commented 7 years ago

I guess this can be closed now