search

lucacalcaterra / risco-mqtt-bridge

Risco Alarm panel to MQTT Server Bridge
MIT License
25 stars 9 forks source link

seems it doesnt reconnect after disconnected.. #15

Closed pergolafabio closed 4 years ago

pergolafabio commented 5 years ago

hey @lucacalcaterra

noticed lately that my state was not changing anymore, so turned on development today i had the issue again, you see in log it was disconnected, it seems to reconnect, but it stopped polling?

log here ..

,05-04-2019 14:15:43 debug: return null, overview empty! ,05-04-2019 14:15:43 debug: Polled...counter: 5852 ,05-04-2019 14:15:53 debug: polling ... ,05-04-2019 14:15:53 debug: return null, overview empty! ,05-04-2019 14:15:53 debug: Polled...counter: 5853 ,05-04-2019 14:16:03 debug: polling ... ,05-04-2019 14:16:03 debug: return null, overview empty! ,05-04-2019 14:16:03 debug: Polled...counter: 5854 ,05-04-2019 14:16:13 debug: polling ... ,05-04-2019 14:16:13 debug: return null, overview empty! ,05-04-2019 14:16:13 debug: Polled...counter: 5855 ,05-04-2019 14:16:23 debug: polling ... ,05-04-2019 14:16:24 debug: return null, overview empty! ,05-04-2019 14:16:24 debug: Polled...counter: 5856 ,05-04-2019 14:16:34 debug: polling ... ,05-04-2019 14:16:34 debug: return null, overview empty! ,05-04-2019 14:16:34 debug: Polled...counter: 5857 ,05-04-2019 14:16:34 warn: Disconnected from cloud...relogin and init... ,05-04-2019 14:16:34 debug: Logged...Response code is 302: OK ,05-04-2019 14:16:35 debug: ...site and Pin Code sent...Response code is 302: OK ,05-04-2019 14:16:35 debug: ...Cameras taken...Response code is 200 and no data error: OK ,05-04-2019 14:16:36 debug: ...Event History taken...Response code is 200 and no data error: OK ,05-04-2019 14:16:36 debug: ...Detectors taken...Response code is 200 and no data error: OK ,05-04-2019 14:16:36 debug: ...Overview taken...Response code is 200 and no data error: OK ,05-04-2019 14:16:36 debug: return null, overview empty! ,05-04-2019 14:16:36 debug: newarmstatus emitted ,05-04-2019 14:16:36 info: Arming status: armed ,05-04-2019 14:16:36 info: publish messages on MQTT Server ,05-04-2019 14:16:36 debug: Init function for getting data from Cloud completed: OK ,05-04-2019 14:16:44 debug: polling ...

and then nothing, we are almost 2 hours later now

running in portainer

rob1981forest commented 5 years ago

Mine been running fine.....been messing with it today........all my lifx now flash red if the alarm goes off !!

Get Outlook for Androidhttps://aka.ms/ghei36

From: pergolafabio notifications@github.com Sent: Friday, April 5, 2019 3:20:14 PM To: lucacalcaterra/risco-mqtt-bridge Cc: Subscribed Subject: [lucacalcaterra/risco-mqtt-bridge] seems it doesnt reconnect after disconnected.. (#15)

hey @lucacalcaterrahttps://github.com/lucacalcaterra

noticed lately that my state was not changing anymore, so turned on development today i had the issue again, you see in log it was disconnected, it seems to reconnect, but it stopped polling?

log here ..

,05-04-2019 14:15:43 debug: return null, overview empty! ,05-04-2019 14:15:43 debug: Polled...counter: 5852 ,05-04-2019 14:15:53 debug: polling ... ,05-04-2019 14:15:53 debug: return null, overview empty! ,05-04-2019 14:15:53 debug: Polled...counter: 5853 ,05-04-2019 14:16:03 debug: polling ... ,05-04-2019 14:16:03 debug: return null, overview empty! ,05-04-2019 14:16:03 debug: Polled...counter: 5854 ,05-04-2019 14:16:13 debug: polling ... ,05-04-2019 14:16:13 debug: return null, overview empty! ,05-04-2019 14:16:13 debug: Polled...counter: 5855 ,05-04-2019 14:16:23 debug: polling ... ,05-04-2019 14:16:24 debug: return null, overview empty! ,05-04-2019 14:16:24 debug: Polled...counter: 5856 ,05-04-2019 14:16:34 debug: polling ... ,05-04-2019 14:16:34 debug: return null, overview empty! ,05-04-2019 14:16:34 debug: Polled...counter: 5857 ,05-04-2019 14:16:34 warn: Disconnected from cloud...relogin and init... ,05-04-2019 14:16:34 debug: Logged...Response code is 302: OK ,05-04-2019 14:16:35 debug: ...site and Pin Code sent...Response code is 302: OK ,05-04-2019 14:16:35 debug: ...Cameras taken...Response code is 200 and no data error: OK ,05-04-2019 14:16:36 debug: ...Event History taken...Response code is 200 and no data error: OK ,05-04-2019 14:16:36 debug: ...Detectors taken...Response code is 200 and no data error: OK ,05-04-2019 14:16:36 debug: ...Overview taken...Response code is 200 and no data error: OK ,05-04-2019 14:16:36 debug: return null, overview empty! ,05-04-2019 14:16:36 debug: newarmstatus emitted ,05-04-2019 14:16:36 info: Arming status: armed ,05-04-2019 14:16:36 info: publish messages on MQTT Server ,05-04-2019 14:16:36 debug: Init function for getting data from Cloud completed: OK ,05-04-2019 14:16:44 debug: polling ...

and then nothing, we are almost 2 hours later now

running in portainer

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHubhttps://github.com/lucacalcaterra/risco-mqtt-bridge/issues/15, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AsRl0ENUWiHlhS9Aqe5aySgW8It1wsTrks5vd1uegaJpZM4cfCHb.

pergolafabio commented 5 years ago

I never had issues with docker, seems to be happening since portainer... Strange, should be the same ... Seems it happens about 24 later or something

rob1981forest commented 5 years ago

Mine in portainer too.....looks fine......except time is an hour out on logs now clocks gone back in the UK but maybe it's getting that from portainer or my raspberry pi

Get Outlook for Androidhttps://aka.ms/ghei36

From: pergolafabio notifications@github.com Sent: Friday, April 5, 2019 3:42:50 PM To: lucacalcaterra/risco-mqtt-bridge Cc: rob1981forest; Comment Subject: Re: [lucacalcaterra/risco-mqtt-bridge] seems it doesnt reconnect after disconnected.. (#15)

I never had issues with docker, seems to be happening since portainer... Strange, should be the same ... Seems it happens about 24 later or something

— You are receiving this because you commented. Reply to this email directly, view it on GitHubhttps://github.com/lucacalcaterra/risco-mqtt-bridge/issues/15#issuecomment-480301500, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AsRl0F_uZxwgK502qg4ls1HzqQLzZ9xaks5vd2DpgaJpZM4cfCHb.

pergolafabio commented 5 years ago

I have no clue how to investigate this... What have you done in portainer, only load image and set those volume bindings, that's all, not?

rob1981forest commented 5 years ago

Actually just looked again and I'm getting this 'return null, over view empty' message too now .

I was literally messing with this half and hour ago and all was fine

Get Outlook for Androidhttps://aka.ms/ghei36

From: pergolafabio notifications@github.com Sent: Friday, April 5, 2019 3:49:14 PM To: lucacalcaterra/risco-mqtt-bridge Cc: rob1981forest; Comment Subject: Re: [lucacalcaterra/risco-mqtt-bridge] seems it doesnt reconnect after disconnected.. (#15)

I have no clue how to investigate this... What have you done in portainer, only load image and set those volume bindings, that's all, not?

— You are receiving this because you commented. Reply to this email directly, view it on GitHubhttps://github.com/lucacalcaterra/risco-mqtt-bridge/issues/15#issuecomment-480303950, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AsRl0InKJnGrbxERq9ntloSgEgS7qaH7ks5vd2JqgaJpZM4cfCHb.

pergolafabio commented 5 years ago

Ok, so yours is not polling either anymore? Can you make screenshots of your config?

pergolafabio commented 5 years ago

Also, do you have log files in your directory? Mine is always emtpy, I look in logs in portainer itself

rob1981forest commented 5 years ago

Just trying to look at then but now my HA seems to have reset to some old setup.......something wierd going on.

I had redirected logs from 2nd April......must be last time I restarted.

Combined.log shows all is well......it's portainer that is complaining.

Error.log is empty

Get Outlook for Androidhttps://aka.ms/ghei36

From: pergolafabio notifications@github.com Sent: Friday, April 5, 2019 3:54:56 PM To: lucacalcaterra/risco-mqtt-bridge Cc: rob1981forest; Comment Subject: Re: [lucacalcaterra/risco-mqtt-bridge] seems it doesnt reconnect after disconnected.. (#15)

Also, do you have log files in your directory? Mine is always emtpy, I look in logs in portainer itself

— You are receiving this because you commented. Reply to this email directly, view it on GitHubhttps://github.com/lucacalcaterra/risco-mqtt-bridge/issues/15#issuecomment-480306174, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AsRl0CP9nYK6xVVZMOj4G69sNAbHRTgNks5vd2PAgaJpZM4cfCHb.

rob1981forest commented 5 years ago

Actually that may have been my mistake on the HA gui.......my mqtt alarm panel on HA is still controlling the alarm fine

Get Outlook for Androidhttps://aka.ms/ghei36

From: pergolafabio notifications@github.com Sent: Friday, April 5, 2019 3:54:56 PM To: lucacalcaterra/risco-mqtt-bridge Cc: rob1981forest; Comment Subject: Re: [lucacalcaterra/risco-mqtt-bridge] seems it doesnt reconnect after disconnected.. (#15)

Also, do you have log files in your directory? Mine is always emtpy, I look in logs in portainer itself

— You are receiving this because you commented. Reply to this email directly, view it on GitHubhttps://github.com/lucacalcaterra/risco-mqtt-bridge/issues/15#issuecomment-480306174, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AsRl0CP9nYK6xVVZMOj4G69sNAbHRTgNks5vd2PAgaJpZM4cfCHb.

pergolafabio commented 5 years ago

Ok, something else then... Can you make screenshots from your portainer, your settings?

rob1981forest commented 5 years ago

Will get you some later tonight hopefully......all I did was redirect the conf file and logs to a mount point on the pi which in turn is an NFS share on my Synology.

Get Outlook for Androidhttps://aka.ms/ghei36

From: pergolafabio notifications@github.com Sent: Friday, April 5, 2019 4:04:39 PM To: lucacalcaterra/risco-mqtt-bridge Cc: rob1981forest; Comment Subject: Re: [lucacalcaterra/risco-mqtt-bridge] seems it doesnt reconnect after disconnected.. (#15)

Ok, something else then... Can you make screenshots from your portainer, your settings?

— You are receiving this because you commented. Reply to this email directly, view it on GitHubhttps://github.com/lucacalcaterra/risco-mqtt-bridge/issues/15#issuecomment-480309867, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AsRl0AEcGoCZyH2-h7s5G1NBWvb5KeAPks5vd2YHgaJpZM4cfCHb.

pergolafabio commented 5 years ago

Ok, thnx , restarted container, so all good for 24 hours, ok, looking forward to screenshot...

Do you have development node enabled? Normally you see logs then in the logs folder, but mine always stays empty

rob1981forest commented 5 years ago

Yes , I've definitely had mine up and working over 24 hours.....

See attached photos.

No I don't have Dev mode enabled...... not really sure where that would be to be sure.

[Image]

[Image]

[Image]

Get Outlook for Androidhttps://aka.ms/ghei36

From: pergolafabio notifications@github.com Sent: Friday, April 5, 2019 4:23:23 PM To: lucacalcaterra/risco-mqtt-bridge Cc: rob1981forest; Comment Subject: Re: [lucacalcaterra/risco-mqtt-bridge] seems it doesnt reconnect after disconnected.. (#15)

Ok, thnx , restarted container, so all good for 24 hours, ok, looking forward to screenshot...

Do you have development node enabled? Normally you see logs then in the logs folder, but mine always stays empty

— You are receiving this because you commented. Reply to this email directly, view it on GitHubhttps://github.com/lucacalcaterra/risco-mqtt-bridge/issues/15#issuecomment-480316847, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AsRl0MOWHJm24y4_sC3tZoSAlPXFmuouks5vd2prgaJpZM4cfCHb.

pergolafabio commented 5 years ago

dont see the images :)

well, if i dont enable development as node, i dont see any logs coming in , its just blanc

rob1981forest commented 5 years ago

Sorry mate, will try again to get some actual screen shots and send over

Get Outlook for Androidhttps://aka.ms/ghei36

From: pergolafabio notifications@github.com Sent: Friday, April 5, 2019 9:09:47 PM To: lucacalcaterra/risco-mqtt-bridge Cc: rob1981forest; Comment Subject: Re: [lucacalcaterra/risco-mqtt-bridge] seems it doesnt reconnect after disconnected.. (#15)

dont see the images :)

well, if i dont enable development as node, i dont see any logs coming in , its just blanc

— You are receiving this because you commented. Reply to this email directly, view it on GitHubhttps://github.com/lucacalcaterra/risco-mqtt-bridge/issues/15#issuecomment-480406636, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AsRl0Fi0D3n8ng4jpbGAra2gDFNPmNaCks5vd62LgaJpZM4cfCHb.

pergolafabio commented 5 years ago

np :)

but how do you check logs? i think my polling stopped already again ... just seems like its freeze

05-04-2019 17:27:37 debug: polling ... ,05-04-2019 17:27:37 debug: return null, overview empty! ,05-04-2019 17:27:37 debug: Polled...counter: 64 ,05-04-2019 17:27:47 debug: polling ... ,05-04-2019 17:27:47 debug: return null, overview empty! ,05-04-2019 17:27:47 debug: Polled...counter: 65 ,05-04-2019 17:27:57 debug: polling ... ,05-04-2019 17:27:57 debug: return null, overview empty! ,05-04-2019 17:27:57 debug: Polled...counter: 66 ,05-04-2019 17:28:07 debug: polling ... ,05-04-2019 17:28:08 debug: return null, overview empty! ,05-04-2019 17:28:08 debug: Polled...counter: 67 ,05-04-2019 17:28:18 debug: polling ... ,05-04-2019 17:28:18 debug: return null, overview empty! ,05-04-2019 17:28:18 debug: Polled...counter: 68 ,05-04-2019 17:28:28 debug: polling ... ,05-04-2019 17:28:28 debug: return null, overview empty! ,05-04-2019 17:28:28 debug: Polled...counter: 69 ,05-04-2019 17:28:38 debug: polling ... ,05-04-2019 17:28:38 debug: return null, overview empty! ,05-04-2019 17:28:38 debug: Polled...counter: 70 ,05-04-2019 17:28:48 debug: polling ... ,05-04-2019 17:28:49 debug: return null, overview empty! ,05-04-2019 17:28:49 debug: Polled...counter: 71 ,05-04-2019 17:28:59 debug: polling ... ,05-04-2019 17:28:59 debug: return null, overview empty! ,05-04-2019 17:28:59 debug: Polled...counter: 72 ,05-04-2019 17:29:09 debug: polling ... ,05-04-2019 17:29:09 debug: return null, overview empty! ,05-04-2019 17:29:09 debug: Polled...counter: 73 ,05-04-2019 17:29:19 debug: polling ... ,05-04-2019 17:29:19 debug: return null, overview empty! ,05-04-2019 17:29:19 debug: Polled...counter: 74 ,05-04-2019 17:29:29 debug: polling ... ,05-04-2019 17:29:30 debug: return null, overview empty! ,05-04-2019 17:29:30 debug: Polled...counter: 75 ,05-04-2019 17:29:40 debug: polling ... ,05-04-2019 17:29:40 debug: return null, overview empty! ,05-04-2019 17:29:40 debug: Polled...counter: 76 ,05-04-2019 17:29:50 debug: polling ... ,05-04-2019 17:29:50 debug: return null, overview empty! ,05-04-2019 17:29:50 debug: Polled...counter: 77 ,05-04-2019 17:30:00 debug: polling ... ,05-04-2019 17:30:00 debug: return null, overview empty! ,05-04-2019 17:30:00 debug: Polled...counter: 78 ,05-04-2019 17:30:10 debug: polling ... ,05-04-2019 17:30:11 debug: return null, overview empty! ,05-04-2019 17:30:11 debug: Polled...counter: 79 ,05-04-2019 17:30:21 debug: polling ... ,05-04-2019 17:30:21 debug: return null, overview empty! ,05-04-2019 17:30:21 debug: Polled...counter: 80 ,05-04-2019 17:30:31 debug: polling ... ,05-04-2019 17:30:32 debug: return null, overview empty! ,05-04-2019 17:30:32 debug: Polled...counter: 81 ,05-04-2019 17:30:42 debug: polling ... ,05-04-2019 17:30:42 debug: return null, overview empty! ,05-04-2019 17:30:42 debug: Polled...counter: 82 ,05-04-2019 17:30:52 debug: polling ... ,05-04-2019 17:30:52 debug: return null, overview empty! ,05-04-2019 17:30:52 debug: Polled...counter: 83 ,05-04-2019 17:31:02 debug: polling ... ,05-04-2019 17:31:03 debug: return null, overview empty! ,05-04-2019 17:31:03 debug: Polled...counter: 84 ,05-04-2019 17:31:13 debug: polling ... ,05-04-2019 17:31:13 debug: return null, overview empty! ,05-04-2019 17:31:13 debug: Polled...counter: 85 ,05-04-2019 17:31:23 debug: polling ... ,05-04-2019 17:31:23 debug: return null, overview empty! ,05-04-2019 17:31:23 debug: Polled...counter: 86 ,05-04-2019 17:31:33 debug: polling ... ,05-04-2019 17:31:33 debug: return null, overview empty! ,05-04-2019 17:31:33 debug: Polled...counter: 87 ,05-04-2019 17:31:43 debug: polling ... ,05-04-2019 17:31:44 debug: return null, overview empty! ,05-04-2019 17:31:44 debug: Polled...counter: 88 ,05-04-2019 17:31:54 debug: polling ... ,05-04-2019 17:31:54 debug: return null, overview empty! ,05-04-2019 17:31:54 debug: Polled...counter: 89 ,05-04-2019 17:32:04 debug: polling ... ,05-04-2019 17:32:04 debug: return null, overview empty! ,05-04-2019 17:32:04 debug: Polled...counter: 90 ,05-04-2019 17:32:14 debug: polling ... ,05-04-2019 17:32:14 debug: return null, overview empty! ,05-04-2019 17:32:14 debug: Polled...counter: 91 ,05-04-2019 17:32:24 debug: polling ... ,05-04-2019 17:32:25 debug: return null, overview empty! ,05-04-2019 17:32:25 debug: Polled...counter: 92 ,05-04-2019 17:32:35 debug: polling ... ,05-04-2019 17:32:35 debug: return null, overview empty! ,05-04-2019 17:32:35 debug: Polled...counter: 93 ,05-04-2019 17:32:45 debug: polling ... ,05-04-2019 17:32:45 debug: return null, overview empty! ,05-04-2019 17:32:45 debug: Polled...counter: 94 ,05-04-2019 17:32:55 debug: polling ... ,05-04-2019 17:32:55 debug: return null, overview empty! ,05-04-2019 17:32:55 debug: Polled...counter: 95 ,05-04-2019 17:33:05 debug: polling ... ,05-04-2019 17:33:06 debug: return null, overview empty! ,05-04-2019 17:33:06 debug: Polled...counter: 96 ,05-04-2019 17:33:16 debug: polling ... , polling just stopped at 17.33 , dont see any new lines, its already 22.31 now

rob1981forest commented 5 years ago

My logs are redirected to an NFS share I mounted into the raspbian os my docker is on ..they seem to read fine there........

What hardware you running on ?

Get Outlook for Androidhttps://aka.ms/ghei36

From: pergolafabio notifications@github.com Sent: Friday, April 5, 2019 9:31:56 PM To: lucacalcaterra/risco-mqtt-bridge Cc: rob1981forest; Comment Subject: Re: [lucacalcaterra/risco-mqtt-bridge] seems it doesnt reconnect after disconnected.. (#15)

np :)

but how do you check logs? i think my polling stopped already again ... just seems like its freeze

05-04-2019 17:27:37 debug: polling ... ,05-04-2019 17:27:37 debug: return null, overview empty! ,05-04-2019 17:27:37 debug: Polled...counter: 64 ,05-04-2019 17:27:47 debug: polling ... ,05-04-2019 17:27:47 debug: return null, overview empty! ,05-04-2019 17:27:47 debug: Polled...counter: 65 ,05-04-2019 17:27:57 debug: polling ... ,05-04-2019 17:27:57 debug: return null, overview empty! ,05-04-2019 17:27:57 debug: Polled...counter: 66 ,05-04-2019 17:28:07 debug: polling ... ,05-04-2019 17:28:08 debug: return null, overview empty! ,05-04-2019 17:28:08 debug: Polled...counter: 67 ,05-04-2019 17:28:18 debug: polling ... ,05-04-2019 17:28:18 debug: return null, overview empty! ,05-04-2019 17:28:18 debug: Polled...counter: 68 ,05-04-2019 17:28:28 debug: polling ... ,05-04-2019 17:28:28 debug: return null, overview empty! ,05-04-2019 17:28:28 debug: Polled...counter: 69 ,05-04-2019 17:28:38 debug: polling ... ,05-04-2019 17:28:38 debug: return null, overview empty! ,05-04-2019 17:28:38 debug: Polled...counter: 70 ,05-04-2019 17:28:48 debug: polling ... ,05-04-2019 17:28:49 debug: return null, overview empty! ,05-04-2019 17:28:49 debug: Polled...counter: 71 ,05-04-2019 17:28:59 debug: polling ... ,05-04-2019 17:28:59 debug: return null, overview empty! ,05-04-2019 17:28:59 debug: Polled...counter: 72 ,05-04-2019 17:29:09 debug: polling ... ,05-04-2019 17:29:09 debug: return null, overview empty! ,05-04-2019 17:29:09 debug: Polled...counter: 73 ,05-04-2019 17:29:19 debug: polling ... ,05-04-2019 17:29:19 debug: return null, overview empty! ,05-04-2019 17:29:19 debug: Polled...counter: 74 ,05-04-2019 17:29:29 debug: polling ... ,05-04-2019 17:29:30 debug: return null, overview empty! ,05-04-2019 17:29:30 debug: Polled...counter: 75 ,05-04-2019 17:29:40 debug: polling ... ,05-04-2019 17:29:40 debug: return null, overview empty! ,05-04-2019 17:29:40 debug: Polled...counter: 76 ,05-04-2019 17:29:50 debug: polling ... ,05-04-2019 17:29:50 debug: return null, overview empty! ,05-04-2019 17:29:50 debug: Polled...counter: 77 ,05-04-2019 17:30:00 debug: polling ... ,05-04-2019 17:30:00 debug: return null, overview empty! ,05-04-2019 17:30:00 debug: Polled...counter: 78 ,05-04-2019 17:30:10 debug: polling ... ,05-04-2019 17:30:11 debug: return null, overview empty! ,05-04-2019 17:30:11 debug: Polled...counter: 79 ,05-04-2019 17:30:21 debug: polling ... ,05-04-2019 17:30:21 debug: return null, overview empty! ,05-04-2019 17:30:21 debug: Polled...counter: 80 ,05-04-2019 17:30:31 debug: polling ... ,05-04-2019 17:30:32 debug: return null, overview empty! ,05-04-2019 17:30:32 debug: Polled...counter: 81 ,05-04-2019 17:30:42 debug: polling ... ,05-04-2019 17:30:42 debug: return null, overview empty! ,05-04-2019 17:30:42 debug: Polled...counter: 82 ,05-04-2019 17:30:52 debug: polling ... ,05-04-2019 17:30:52 debug: return null, overview empty! ,05-04-2019 17:30:52 debug: Polled...counter: 83 ,05-04-2019 17:31:02 debug: polling ... ,05-04-2019 17:31:03 debug: return null, overview empty! ,05-04-2019 17:31:03 debug: Polled...counter: 84 ,05-04-2019 17:31:13 debug: polling ... ,05-04-2019 17:31:13 debug: return null, overview empty! ,05-04-2019 17:31:13 debug: Polled...counter: 85 ,05-04-2019 17:31:23 debug: polling ... ,05-04-2019 17:31:23 debug: return null, overview empty! ,05-04-2019 17:31:23 debug: Polled...counter: 86 ,05-04-2019 17:31:33 debug: polling ... ,05-04-2019 17:31:33 debug: return null, overview empty! ,05-04-2019 17:31:33 debug: Polled...counter: 87 ,05-04-2019 17:31:43 debug: polling ... ,05-04-2019 17:31:44 debug: return null, overview empty! ,05-04-2019 17:31:44 debug: Polled...counter: 88 ,05-04-2019 17:31:54 debug: polling ... ,05-04-2019 17:31:54 debug: return null, overview empty! ,05-04-2019 17:31:54 debug: Polled...counter: 89 ,05-04-2019 17:32:04 debug: polling ... ,05-04-2019 17:32:04 debug: return null, overview empty! ,05-04-2019 17:32:04 debug: Polled...counter: 90 ,05-04-2019 17:32:14 debug: polling ... ,05-04-2019 17:32:14 debug: return null, overview empty! ,05-04-2019 17:32:14 debug: Polled...counter: 91 ,05-04-2019 17:32:24 debug: polling ... ,05-04-2019 17:32:25 debug: return null, overview empty! ,05-04-2019 17:32:25 debug: Polled...counter: 92 ,05-04-2019 17:32:35 debug: polling ... ,05-04-2019 17:32:35 debug: return null, overview empty! ,05-04-2019 17:32:35 debug: Polled...counter: 93 ,05-04-2019 17:32:45 debug: polling ... ,05-04-2019 17:32:45 debug: return null, overview empty! ,05-04-2019 17:32:45 debug: Polled...counter: 94 ,05-04-2019 17:32:55 debug: polling ... ,05-04-2019 17:32:55 debug: return null, overview empty! ,05-04-2019 17:32:55 debug: Polled...counter: 95 ,05-04-2019 17:33:05 debug: polling ... ,05-04-2019 17:33:06 debug: return null, overview empty! ,05-04-2019 17:33:06 debug: Polled...counter: 96 ,05-04-2019 17:33:16 debug: polling ... , polling just stopped at 17.33 , dont see any new lines, its already 22.31 now

— You are receiving this because you commented. Reply to this email directly, view it on GitHubhttps://github.com/lucacalcaterra/risco-mqtt-bridge/issues/15#issuecomment-480412823, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AsRl0Fmr-3pOkWp0EuWksK0uKJwzkTgIks5vd7K8gaJpZM4cfCHb.

pergolafabio commented 5 years ago

i am running an esxi server, with Hassos Hassio i mounted like this : https://www.dropbox.com/s/6tflsu7rsyaq4ox/riscoportainer.JPG?dl=0 so the .js file is working fine, but my logs folder stays empty you see also in screenshot that i enable development, then you see i think debug log

rob1981forest commented 5 years ago

[Image]

Get Outlook for Androidhttps://aka.ms/ghei36

From: pergolafabio notifications@github.com Sent: Friday, April 5, 2019 9:41:48 PM To: lucacalcaterra/risco-mqtt-bridge Cc: rob1981forest; Comment Subject: Re: [lucacalcaterra/risco-mqtt-bridge] seems it doesnt reconnect after disconnected.. (#15)

i am running an esxi server, with Hassos Hassio i mounted like this : https://www.dropbox.com/s/6tflsu7rsyaq4ox/riscoportainer.JPG?dl=0 so the .js file is working fine, but my logs folder stays empty you see also in screenshot that i enable development, then you see i think debug log

— You are receiving this because you commented. Reply to this email directly, view it on GitHubhttps://github.com/lucacalcaterra/risco-mqtt-bridge/issues/15#issuecomment-480415383, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AsRl0NCMQE2SqV_8OvDmvSFCG6_bUjh9ks5vd7UMgaJpZM4cfCHb.

pergolafabio commented 5 years ago

I don't see your images ;)

pergolafabio commented 5 years ago

@lucacalcaterra

Can you help me out here, in my first reply you see it just stopped polling... But it's possible that my logs are maybe wrong... Seems portainer I think is not refreshing logs anymore after some time... Not 100% sure...

What I do know , is that after a while I don't receive information anymore, so need to restart the docker... Not sure why... So I want to capture logs, so created that volume binding, but the logs folder is always empty... Also if I enable development, to see debug...

Any idea why? 2 posts back you see a screenshot of my volume binding, it looks correct... I'd it maybe permission? Or do I need to create an empty log file ? I am stuck here

pergolafabio commented 5 years ago

happened again, this time after 2 days, i need to restart docker again state is again unavailable, also arm/disarm command dont do anything anymore

can some make me a screenshot how i can enable those logs? my logs folder is always empty

path in container i configured as : /app/logs also node_environment = development thnx

lucacalcaterra commented 5 years ago

Hi Fabio, these days hav no time... can we sync next week ? Thanks, Luca

Il giorno mar 9 apr 2019 alle ore 22:29 pergolafabio < notifications@github.com> ha scritto:

happened again, this time after 2 days, i need to restart docker again state is again unavailable, also arm/disarm command dont do anything anymore

can some make me a screenshot how i can enable those logs? my logs folder is always empty

path in container i configured as : /app/logs also node_environment = development thnx

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/lucacalcaterra/risco-mqtt-bridge/issues/15#issuecomment-481422551, or mute the thread https://github.com/notifications/unsubscribe-auth/AA1s0XmelelcaeTMpjT760Qy-nl37PC1ks5vfPgYgaJpZM4cfCHb .

pergolafabio commented 5 years ago

Ok, np ;)

rob1981forest commented 5 years ago

this is mine........... Capture

pergolafabio commented 5 years ago

really dont get it, i have the exact same you actually see log files on your host volume?

this is mine config, its the same

https://www.dropbox.com/s/pbxvkazf1o932ew/port.JPG?dl=0

rob1981forest commented 5 years ago

yeah, i get logs in mine - called combined.log

pergolafabio commented 5 years ago

maybe its a permission issue , but i dont know where to enter credentials in portainer

pergolafabio commented 5 years ago

no , its no permission issue, it can assess that folder, otherwise my config file wouldt load also now tried docker on synology, also no combined.log file there if i start i am missing something here

pergolafabio commented 5 years ago

ok, got it i now first created that combined.log file, and did chmod 777 now its populated, allthough i think if "development" is enabled, then it creates more files @rob1981forest

can you enable also development? like here just add node NODE_ENV => development https://www.dropbox.com/s/pbxvkazf1o932ew/port.JPG?dl=0

pergolafabio commented 5 years ago

did now chmod 777 on logs folder

now it creates 2 files combined.log and error.log

but combined.log is not filling, the only text in it is like :

10-04-2019 15:56:47 info: Connected to MQTT Server 10-04-2019 15:56:52 info: Arming status: armed 10-04-2019 15:56:52 info: publish messages on MQTT Server

thats about it

pergolafabio commented 5 years ago

ok, seems its only populating "info" logs not "debug" i wait for @lucacalcaterra how i can enable "debug" so i actually see "debug" in combined.log and error.log

i have set NODE_ENV to development i see debug passing if i go to logs within the container in portainer itself, i just dont see them in the files

pergolafabio commented 5 years ago

ok, changed polling from 100000 to 150000 , didnt help either i see it stopped polling again, issue/error in log , it just stops it seems

rob1981forest commented 5 years ago

Mine seems solid and hasn't let me down........your internet connectivity good ?

Get Outlook for Androidhttps://aka.ms/ghei36

From: pergolafabio notifications@github.com Sent: Sunday, April 14, 2019 10:44:07 AM To: lucacalcaterra/risco-mqtt-bridge Cc: rob1981forest; Mention Subject: Re: [lucacalcaterra/risco-mqtt-bridge] seems it doesnt reconnect after disconnected.. (#15)

ok, changed polling from 100000 to 150000 , didnt help either i see it stopped polling again, issue/error in log , it just stops it seems

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHubhttps://github.com/lucacalcaterra/risco-mqtt-bridge/issues/15#issuecomment-482938737, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AsRl0FFrxxPa4xQ38pGOKh_nHeO-aCpbks5vgvhngaJpZM4cfCHb.

pergolafabio commented 5 years ago

no internet issues here stopped now portainer, and testing now docker on synology never had issues there, will see in a few days

Davewarrington commented 5 years ago

Suffering the same situation here also, portainer in Ha, Log files seem ok, 24 hours later blank . one restart of the container and we're off again .

pergolafabio commented 5 years ago

ah, glad i am not the only one :) its not 24hours, sometimes sooner, sometimes longer i think, but indeed approx 1 day... now stopped portainer, using docker on synology , rock solid for 3 days now really dont understand issue with portainer :(

if we know how to enable/export debug logs, then we can start investigating, because i prefer to use portainer instaed of docker

rob1981forest commented 5 years ago

Very strange......my portainer seems fine......and I really have no idea what I'm doing so it's not like I have some expert configuration on there.......at least you have the answer

Get Outlook for Androidhttps://aka.ms/ghei36

From: pergolafabio notifications@github.com Sent: Tuesday, April 16, 2019 5:57:35 PM To: lucacalcaterra/risco-mqtt-bridge Cc: rob1981forest; Mention Subject: Re: [lucacalcaterra/risco-mqtt-bridge] seems it doesnt reconnect after disconnected.. (#15)

ah, glad i am not the only one :) its not 24hours, sometimes sooner, sometimes longer i think, but indeed approx 1 day... now stopped portainer, using docker on synology , rock solid for 3 days now really dont understand issue with portainer :(

if we know how to enable/export debug logs, then we can start investigating, because i prefer to use portainer instaed of docker

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHubhttps://github.com/lucacalcaterra/risco-mqtt-bridge/issues/15#issuecomment-483758026, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AsRl0JFRVbA8i_X-MTEru8Z3Sd5mFgN0ks5vhgD_gaJpZM4cfCHb.

Davewarrington commented 5 years ago

The only thing i noticed of late was portainer received an update a few days ago ..

pergolafabio commented 5 years ago

yes, 0.6.0 , didnt try that one, i was an previous version but shouldt not mather anyway

Davewarrington commented 5 years ago

Portainer disabled, issue still persists .. I'll have a look at the debug logs later on tonight if i can get to them :o

pergolafabio commented 5 years ago

So how are you running the container if disabled?

Davewarrington commented 5 years ago

Ahh only portainer was disabled,docker still running.

pergolafabio commented 5 years ago

ah ok , well in run the container now in docker "software on synology" , its now stable for 4 days so it must be related in running the container under portainer/hassio do you run hassio with portainer as addon?

pergolafabio commented 5 years ago

we need to know how we can enable debug log , so we can see when it quits polling and why

rob1981forest commented 5 years ago

I don't run Hassio.....I just have raspbian on a pi.....the docker and then portainer.....I then install the RPI home assistant image.

However my DS918+ turned up today so it's all gonna change soon !

Get Outlook for Androidhttps://aka.ms/ghei36

From: pergolafabio notifications@github.com Sent: Wednesday, April 17, 2019 9:23:33 PM To: lucacalcaterra/risco-mqtt-bridge Cc: rob1981forest; Mention Subject: Re: [lucacalcaterra/risco-mqtt-bridge] seems it doesnt reconnect after disconnected.. (#15)

ah ok , well in run the container now in docker "software on synology" , its now stable for 4 days so it must be related in running the container under portainer/hassio do you run hassio with portainer as addon?

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHubhttps://github.com/lucacalcaterra/risco-mqtt-bridge/issues/15#issuecomment-484246935, or mute the threadhttps://github.com/notifications/unsubscribe-auth/ALCGLUAFNVIDFBACJMYPJNLPQ6BMLANCNFSM4HD4EHNQ.

lucacalcaterra commented 5 years ago

Have you solved it ?

pergolafabio commented 5 years ago

No, on portainer still issue, but on docker on Synology is stable... How can I also enable debug log for export?

pergolafabio commented 5 years ago

ok, docker on synology was fine for a week now back running it under portainer, let see what happens

@lucacalcaterra , can you tell me how to enable debug log and export those to the files? so they are in combined.log and error.log ?

thn

pergolafabio commented 5 years ago

today it happened on my docker (synology) as well, was stable for 3 days had to restart it now enabled debug on it