Open HuubH opened 3 years ago
It would also be very helpful to provide a BOM with part numbers, as some of the components are a bit ambiguous. Anyways, thanks Niklas for sharing this project! I'd love to build it soon.
Hi,
I just ordered from JLCPCB. 5 PCB's, 2 assembled. I removed some components from the BOM and POS (Q1,Q2,Q3,Q4) That gave me a positive result on JLCPCB. The OPA2683 and USB-C weren't in stock. Have to order those separately.
@NiklasFauth I'm missing the value for resistors with reference TBD. Could you give me the values of these TBD components.
Will report back when my order has arrived and parts are mounted in the Sony.
Again, love this project, bought 2 Sony's on e-bay. Can't wait for the goods to arrive.
Regards Huub
I also ordered some PCBs and parts (already got the Watchman). Hopefully I didn't mess anything up.
@HuubH Not sure if I missed something, but I only see TBD for the 1.1 schematic. Here's what I ordered (1.2):
Hi,
I used the BOM of V1.1 and roughly checked the differences in component used in the schematics of both. Then used this list with the V1.2 Gerber files to order pcb's incl. parts placement.
The PDF schematic file and the Kicad schematic V1.2 contain R12, R24, R25, R36, R52 which show a " DNP" value in my case. (Not TBD as mentioned before. Sorry for the typo. )
Looking at your list, these part numbers are not listed or maybe not shown and somehow cutoff in row C25804?
Hope I didn't make a mistake somewhere,
@sealj553 If you can provide me with the value of those components that would be great.
Huub
I believe DNP means "do not populate/place", so you should be able to just leave those out.
On Tue, Feb 2, 2021, 11:45 AM HuubH notifications@github.com wrote:
Hi,
I used the BOM of V1.1 and roughly checked the differences in component used in the schematics of both. Then used this list with the V1.2 Gerber files to order pcb's incl. parts placement.
The PDF schematic file and the Kicad schematic V1.2 contain R12, R24, R25, R36, R52 which show a " DNP" value in my case. (Not TBD as mentioned before. Sorry for the typo. )
Looking at your list, these part numbers are not listed or maybe not shown and somehow cutoff in row C25804?
Hope I didn't make a mistake somewhere,
@sealj553 https://github.com/sealj553 If you can provide me with the value of those components that would be great.
Huub
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/NiklasFauth/sony-scopeman/issues/2#issuecomment-771776403, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACDUBWBHOIO4SV55PHNAHTLS5ATZ7ANCNFSM4WFEM4HA .
Ah, thanks a lot for that piece of information. That gives me some peace of mind 👍
I believe DNP means "do not populate/place", so you should be able to just leave those out. …
@sealj553 After some tinkering got it working :)
@NiklasFauth Thanks again for sharing the project
Hi, love the project!
I'm planning to order an assembled pcb but am confused on which version of Gerber and bom files I should use on JLCPCB.
When using Gerber_v1.1 with bom from the same folder I get good results on JLCPCB, mixing v1.2 with bom of v1.1 obviously there are errors.
Could you please enlighten me
Best Regards Huub