Different results on discharge app and discharge.ch for discharge, when chosing a certain water level

[timoherberz]

Hello, again for the site Kikuletwa TPC in Official Sites Pangani: When chosing the current level [m], the discharge app gives around 60m³/s as discharge for a water level of 1. When checking the rating curve on discharge.ch, the result for one meter water level is 14.2m³/s. Something might be wrong with those calculations.

Thanks in advance!

Kind regards, Timo

[salpeha]

Yes, something looks fishy, the point drawn on the graph should be located on top of the line. In any case, I was taking a look and I don't see on the web a rating curve called "Official Gauging Curve PWBO". Did someone delete it?

[timoherberz]

The rating curve was integrated into a seperate site called "RatingCurvePBWO" in the sub-organisation "Kikuletwa@TPC" in the organisation "Official Sites Pangani".

Am 20.02.2017 um 13:01 schrieb salpeha:

Yes, something looks fishy, the point drawn on the graph should be located on top of the line. In any case, I was taking a look and I don't see on the web a rating curve called "Official Gauging Curve PWBO". Did someone delete it?

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/luethi/Discharge_Optical_Measurement/issues/32#issuecomment-281036158, or mute the thread https://github.com/notifications/unsubscribe-auth/AYTBYI_whNoby2bhCzY1HDBtl_sGvpQBks5reWR-gaJpZM4MB21_.

[rmunk]

• The difference in the results of the exponential rating curve comes from discrepancy between web and app formula. It has been fixed with: https://github.com/luethi/discharge/issues/260
• Rating curve drawing issue in the app is resolved with: https://github.com/luethi/discharge/issues/255
• Drawing issue on the web will be handled by: https://github.com/luethi/discharge_web_frontend/issues/383

[timoherberz]

Ok, thanks!