I have got the Pi up and running, but there is no IIO block in GRC, just a Soapy Pluto sink and source. Is that correct. IIO scope works though so not sure if it is user error.
From: Luigi Cruz @.>
Sent: Sunday, January 29, 2023 9:13:55 AM
To: luigifcruz/pisdr-image @.>
Cc: andythegrouch @.>; Author @.>
Subject: Re: [luigifcruz/pisdr-image] Welcome to PiSDR Discussions! (Issue #88)
USB 2.0 should be more than enough to stream data at 10 MHz. But the CPU power of the RPi4 might be a limiting factor. I've used Pluto with an RPi4 before but I can't remember a number. Keep in mind that this will be heavily influenced by the amount of DSP you need.
I have got the Pi up and running, but there is no IIO block in GRC, just a Soapy Pluto sink and source. Is that correct. IIO scope works though so not sure if it is user error.
Andy
Sent from Outlook for iOShttps://aka.ms/o0ukef
From: Luigi Cruz @.> Sent: Sunday, January 29, 2023 9:13:55 AM To: luigifcruz/pisdr-image @.> Cc: andythegrouch @.>; Author @.> Subject: Re: [luigifcruz/pisdr-image] Welcome to PiSDR Discussions! (Issue #88)
USB 2.0 should be more than enough to stream data at 10 MHz. But the CPU power of the RPi4 might be a limiting factor. I've used Pluto with an RPi4 before but I can't remember a number. Keep in mind that this will be heavily influenced by the amount of DSP you need.
— Reply to this email directly, view it on GitHubhttps://github.com/luigifcruz/pisdr-image/issues/88#issuecomment-1407606914, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ABICIK2W5H3RDHRNFUI3NYLWUYYFHANCNFSM6AAAAAAUJSAJSY. You are receiving this because you authored the thread.Message ID: @.***>
Originally posted by @andythegrouch in https://github.com/luigifcruz/pisdr-image/issues/88#issuecomment-1407764997