[Bug] 0.8.83 since update, inverters randomly on status "available and not producing"

[jrnas]

Platform

ESP32

Assembly

I did the assebly by myself

nRF24L01+ Module

nRF24L01+ plus

Antenna

external antenna

Power Stabilization

Elko (~100uF)

Connection picture

• [ ] I will attach/upload an Image of my wiring

Version

0.8.83

Github Hash

5ebfe5a8fb5bcc833b64a0dd083686031808cec8

Build & Flash Method

AhoyDTU Webinstaller

Setup

nothing changed

Debug Serial Log output

No response

Error description

since 0.8.38 update randomly (every 1,2 minutes) inverters were on status "available and is not producing"

[juepi]

Hi jrnas,

Go to the Settings of your inverter and verify if the checkbox reset values when inverter status is 'not available' is active. If it is, deactivate the setting, reboot AhoyDTU and verify if the problem still persists.

yours, Juergen

[jrnas]

It helps yes, but i would like to know if the inverter is available or not, it would be great if there is a timeout that can be configured in the UI

[juepi]

Ok, then it may be related to #1035 @lumapu ?

Jrnas, this was just for verification ;-)

[jrnas]

Yes but before the update it works, but since update not correctly, it seems that the timeout has been lowered or something

[lumapu]

Which version did you use before? Do you have an idea how much your inverter produced once this happened? Was it in the early morning?

[jrnas]

The old release one 0.8.36. no it doesn’t matter whitch time, it happens every 2-3 minutes

[knickohr]

Please check your power settings in the inverter Settings tab.

[stefan123t]

@jrnas is this problem still ocurring with the current v0.8.152 maybe we can close the issue in case it has been fixed ?

[jrnas]

nope closed