How Enable / Show / Test Zero-Export Config on Openfusion Board

[sibelle-labs]

Hardware

• [ ] ESP8266
• [X] ESP32
• [ ] Raspberry Pi

Modelname: OpenDTU Fusion Retailer URL: https://shop.allianceapps.io/products/allianceapps-opendtu-fusion

nRF24L01+ Module

• [X] nRF24L01+ you verified this is a Plus model capable of the required 256kBit/s mode
• [ ] square dot indicates original Nordic Semicon chip
• [ ] round dot indicates copy-cat / counterfeit SI labs chip

Antenna:

• [ ] circuit board
• [X] external antenna (SMA)

Power Stabilization:

• [X] 100uF Electrolytic Capacitor connected between +3.3V and GND (Pin 1 & 2) of the NRF Module
• [X] Voltage stabilizing motherboard

Version / Git SHA:

Version:0.8.152 Github Hash: 78cbd77

Build & Flash Method:

• [X] AhoyDTU Webinstaller
• [ ] VSCode - Platform IO
• [ ] Arduino
• [ ] ESP Tools

Debugging:

• [ ] USB Serial Log (attached)
• [ ] Setup settings (use our templates ... to be added)

Hi!, Today I discovered the following link: https://docs.ahoydtu.de/de/latest/zeroExport.html I am currently running the development version 0.8.152 on an OpenDTU Fusion. But how do I get a look at the zero export function? Do I have the wrong platform? or file? or what am I missing?

installed version (original filename): 241007_ahoy_0.8.152_78cbd77_opendtufusion.bin

Many thanks,

[sibelle-labs]

see discord channel