Feature Request: add MQTT TLS

[nuiler]

Hardware

• [ ] ESP8266
• [ ] ESP32
• [ ] Raspberry Pi

Modelname: __ Retailer URL: __

nRF24L01+ Module

• [ ] nRF24L01+ you verified this is a Plus model capable of the required 256kBit/s mode
• [ ] square dot indicates original Nordic Semicon chip
• [ ] round dot indicates copy-cat / counterfeit SI labs chip

Antenna:

• [ ] circuit board
• [ ] external antenna

Power Stabilization:

• [ ] 100uF Electrolytic Capacitor connected between +3.3V and GND (Pin 1 & 2) of the NRF Module
• [ ] Voltage stabilizing motherboard

Connection diagram:

• [ ] Image of the your wiring attached

Connection diagram I used:

nRF24L01+ Pin	ESP8266 GPIO
Pin 1 GND [*]	GND
Pin 2 +3.3V	+3.3V
Pin 3 CE	GPIO2 CE D4
Pin 4 CSN	GPIO15 CS D8
Pin 5 SCK	GPIO14 SCLK D5
Pin 6 MOSI	GPIO13 MOSI D7
Pin 7 MISO	GPIO12 MISO D6
Pin 8 IRQ	GPIO0 IRQ D3

nRF24L01+ Pin	ESP32 GPIO
Pin 1 GND [*]	GND
Pin 2 +3.3V	+3.3V
Pin 3 CE	GPIO4 CE D4
Pin 4 CSN	GPIO5 CS D5
Pin 5 SCK	GPIO18 SCLK D18
Pin 6 MOSI	GPIO23 MOSI D23
Pin 7 MISO	GPIO19 MISO D19
Pin 8 IRQ	GPIO0 IRQ D0

Note: [*] GND Pin 1 has a square mark on the nRF24L01+ module

Software

• [ ] AhoyDTU
• [ ] OpenDTU

Version / Git SHA:

Version: ..__ Github Hash: ___

Build & Flash Method:

• [ ] Arduino
• [ ] ESP Tools
• [ ] Platform IO

Desktop OS:

• [ ] Linux
• [ ] Windows
• [ ] Mac OS

Debugging:

• [ ] USB Serial Log (attached)
• [ ] Setup settings (use our templates ... to be added)

[Argafal]

No. It has not been implemented. It would of course be nice if someone added this functionality. See issue #251 where this has been discussed already.

[lumapu]

the used lib die support this feature, I can implement that but not test. I think only the key must be provided to MQTT

[stefan123t]

Duplicate of #251