Documentation: Pull request for the firmware version collection in the User_Manual.md for another Hoymiles HM-300 model?

Should I create a pull request vor the values from the Ahoy-DTU API /api/record/info of the HM-300 microinverter for the firmware version collection in the User_Manual.md or is this no longer required?

I successfully connected to the device and wanted to give positive feedback for this awesome project!

{"inverter":[[{"fld":"FWVersion","unit":"","val":"10010.00"},
{"fld":"FWBuildYear","unit":"","val":"2020.00"},
{"fld":"FWBuildMonthDay","unit":"","val":"707.00"},
{"fld":"FWBuildHourMinute","unit":"","val":"1412.00"},
{"fld":"HWPartId","unit":"","val":"102.00"}]]}

Hardware

[x] ESP8266
[ ] ESP32
[ ] Raspberry Pi

nRF24L01+ Module

[x] nRF24L01+ you verified this is a Plus model capable of the required 256kBit/s mode
[ ] square dot indicates original Nordic Semicon chip
[ ] round dot indicates copy-cat / counterfeit SI labs chip

Antenna:

[x] circuit board
[ ] external antenna (SMA)

Power Stabilization:

[ ] 100uF Electrolytic Capacitor connected between +3.3V and GND (Pin 1 & 2) of the NRF Module
[ ] Voltage stabilizing motherboard

Version / Git SHA:

Version: 0.6.9 Github Hash: 15ec6a0

Build & Flash Method:

[x] AhoyDTU Webinstaller
[ ] VSCode - Platform IO
[ ] Arduino
[ ] ESP Tools

Debugging:

[ ] USB Serial Log (attached)
[ ] Setup settings (use our templates ... to be added)

lumapu / ahoy

Documentation: Pull request for the firmware version collection in the User_Manual.md for another Hoymiles HM-300 model? #896