PRS+ 2.1.01 alpha for 650 - Unable to connect to Reader or upload books

[GoogleCodeExporter]

Your model / PRS+ version?
Sony PRS 650 Touch / PRS+ 2.1 alpha for 650 

What steps will reproduce the problem?
Can't really tell,'cause after shut down it's back to original Sony firmware 
(1.0.00.14080). 

What is the expected output? What do you see instead?
When connected to PC, only drive "SETTING" shows up. SD-cards appear also 
normal, but what should be drive "READER" can not be accessed by Windows nor by 
Callibre.
Trying to install PRSP 650 2.0.18 results in an error, while Setup claims 2.1 
alpha to be active, even when the Reader itself shows no sign of it.

Original issue reported on code.google.com by silberk...@gmx.de on 24 Nov 2012 at 12:21

[GoogleCodeExporter]

P.S.
The Reader is fully functioning also battery will be charged normal, but no 
chance to to change firmware or books at all.

Original comment by silberk...@gmx.de on 24 Nov 2012 at 12:29

[GoogleCodeExporter]

Hi, 
are you sure you didn't load in "safe" mode?
When reader is connected to USB during startup, PRS+ doesn't load.

This doesn't explain why you don't have "READER" drive though, as in this case 
you're on stock Sony firmware.

Original comment by kar...@gmail.com on 17 Dec 2012 at 7:06

[GoogleCodeExporter]

Original comment by msukhias...@gmail.com on 17 Dec 2012 at 7:09

• Changed title: PRS+ 2.1.01 alpha for 650 - Unable to connect to Reader or upload books
• Changed state: CantReproduce

[GoogleCodeExporter]

First, fortunately(after diassambling/assambling the battery) my Reader was 
accessable again, so i could uninstall PRS+ 2.1.01 alpha and reinstall version 
2.0.18. Now it's all back to normal again. No more connect problems.

My guess is, it had something to do with the new "USB feature" wich should 
allow you to choose between data connection and simply charging the battery - 
also i NEVER changed this setting...

Original comment by silberk...@gmx.de on 18 Dec 2012 at 8:15