search

luqibin / grub4dos-chenall

Automatically exported from code.google.com/p/grub4dos-chenall
0 stars 0 forks source link

usb --init messages not displayed on screen from menu #173

Open GoogleCodeExporter opened 9 years ago

GoogleCodeExporter commented 9 years ago 
What steps will reproduce the problem?
title usb init
usb --init
echo
echo
pause

1.
2.
3.

What is the expected output? What do you see instead?

The Scanning Devices ... message is displayed, but the message about '1 Devices 
found 0x81' is not displayed. It is only displayed from the console.

What version of the product are you using? On what operating system?
grldr 281839 bytes 2014_03_13

Please provide any additional information below.

Original issue reported on code.google.com by Steve6375 on 14 Mar 2014 at 8:50

GoogleCodeExporter commented 9 years ago 
It was just a test version, designed for testing issuse171 circumstances in 
order to facilitate the capture, display the information into an infinite loop. 

Unofficial release. Depending on this issue should be discussed within the 
issuse 171.

Original comment by yaya2007_7777@126.com on 14 Mar 2014 at 11:48

GoogleCodeExporter commented 9 years ago 
grldr is from issue 166  post #24

Original comment by Steve6375 on 15 Mar 2014 at 12:30

GoogleCodeExporter commented 9 years ago 
Try this.

Original comment by yaya2007_7777@126.com on 17 Mar 2014 at 1:44

Attachments:

GoogleCodeExporter commented 9 years ago 
No - same problem. No devices found message (screen is in graphics mode)

Original comment by Steve6375 on 17 Mar 2014 at 11:03

GoogleCodeExporter commented 9 years ago 
if USB Flash drive on Inspiron 530,Please discuss in issue 171.

Unloading Usb3.0 equipment. 
Insert usb2.0 devices. 
There must be usb2.0 device!

Original comment by yaya2007_7777@126.com on 17 Mar 2014 at 11:32

GoogleCodeExporter commented 9 years ago 
I use EeePC 904HA
Please try menu

title usb init
usb --init
echo
echo
pause

you will see. I think USB driver works and has initisalised one USB device. The 
problem is the text message is not displayed on the screen.
This is a text display problem.

Original comment by Steve6375 on 17 Mar 2014 at 11:45

GoogleCodeExporter commented 9 years ago 
[deleted comment]
GoogleCodeExporter commented 9 years ago 
title usb init
usb --init
echo 123
echo 456
pause

Showing

Original comment by yaya2007_7777@126.com on 17 Mar 2014 at 12:32

GoogleCodeExporter commented 9 years ago 
This displays
... Scanning USB devices ...   123
456

There is no message about '1 USB devices found'

Original comment by Steve6375 on 17 Mar 2014 at 12:38

GoogleCodeExporter commented 9 years ago 
This displays

... Scanning USB devices ...
Found 1 USB devices. Device Num: 0x00;123
456

Original comment by yaya2007_7777@126.com on 18 Mar 2014 at 1:28

GoogleCodeExporter commented 9 years ago 
OK, sorry, I had debug off !
please close, not a problem.

Original comment by Steve6375 on 18 Mar 2014 at 8:30

GoogleCodeExporter commented 9 years ago 
This issue can be closed s 'Not a problem'

Original comment by Steve6375 on 2 Sep 2014 at 8:49