search

lvgl / lv_port_esp32

LVGL ported to ESP32 including various display and touchpad drivers
MIT License
1.05k stars 439 forks source link

RA8875 7" LCD not functioning with this library (white screen random lines) - ER-TFTM070-5 screen from BuyDisplay #247

Closed can-caglar closed 3 years ago

can-caglar commented 3 years ago

We use GitHub issues for development related discussions. Please use the forum to ask questions.

Issue

After setting up the device pins on menuconfig and flashing the basic example (with some modifications that I will explain below), I see a white screen with some coloured lines. Like this:

ra8875

Code to reproduce the issue

Basic example code as found in the latest release, using latest IDF (v4.3) however I modified the ra8875.c library to turn on the internal PWM because the LCD would not turn on otherwise.

// These are the PWM registers that I defined in the .h file
//#define RA8875_REG_P1CR   (0x8A)
//#define RA8875_REG_P1DCR   (0x8B)

void ra8875_configure_clocks(bool high_speed)
{
    uint8_t val;

    val = high_speed ? ((CONFIG_LV_DISP_RA8875_PLLDIVM << 7) | CONFIG_LV_DISP_RA8875_PLLDIVN) : 0x07;
    ra8875_write_cmd(RA8875_REG_PLLC1, val);           // PLL Control Register 1 (PLLC1)
    vTaskDelay(1);

    val = high_speed ? CONFIG_LV_DISP_RA8875_PLLDIVK : 0x03;
    ra8875_write_cmd(RA8875_REG_PLLC2, val);           // PLL Control Register 2 (PLLC2)
    vTaskDelay(1);

    // Changes start here (starting PWM)
    uint8_t P1CR_config = 0x82; //pwm enable, disable level = 0, pwm1 function, clk/8

    val = high_speed ? P1CR_config : 0x82;

    ra8875_write_cmd(RA8875_REG_P1CR, val);           // P1CR register
    vTaskDelay(1);

    uint8_t P1DCR_config = 0xfe; //pwm duty cycle 255 = 256/256 duty. 0xff == full brightness
    val = high_speed ? P1DCR_config : 0x80;

    ra8875_write_cmd(RA8875_REG_P1DCR, val);           // P1DCR register
    vTaskDelay(1);
   // changes end here

    ra8875_write_cmd(RA8875_REG_PCSR, PCSR_VAL);            // Pixel Clock Setting Register (PCSR)
    vTaskDelay(DIV_ROUND_UP(20, portTICK_RATE_MS));
}

Expected Results

The basic demo to show on the display.

Actual Results

See image above.

ESP32 Chip version

ESP32-D0WD (revision 1)

ESP-IDF version

4.3

Development kit used

ESP32-DevkitC v4

Development machine OS

Ubuntu v20.04.1

Compilation warnings/errors (if available)

None

If possible, copy the compilation log into a file and attach it here

C47D commented 3 years ago

Hi, can you attach the idf.py monitor output? And if possible a capture using a logic analyzer if you have one, and the size of your display.

can-caglar commented 3 years ago

Hey C47D, thanks for your great work with this library, really enjoying using it :).

Here is the monitor output:

ra8875_idfpy_menuconfig.txt

Here's the display that I'm using- it's from BuyDisplay. All the solder pads behind are soldered/left open to enable 4-wire SPI. Resolution is 800 x 480

ra8875_back

Here is the logic analyzer capture from Pulseview (note: I had to slow down the initial set-up phase to 100kHz because my logic analyser was struggling to capture data at that speed), however with those settings, I still see the same issue as before):

RA8875_RUN.zip

In case you can't open that file, here it is via images along with my menuconfig settings:

RA8875_Troubleshoot.pdf

C47D commented 3 years ago

@jhancharler Thanks for all the information, I will try to take a look at it later today.

EDIT I wasn't able to load the sr file, will take a look at the attached pdf.

C47D commented 3 years ago

Is it possible for you to test the latest master? I've cleaned up a bit the lvgl_esp32_drivers component.

can-caglar commented 3 years ago

I've pulled the latest master.

Unpacking objects: 100% (24/24), 7.39 KiB | 1.05 MiB/s, done. From https://github.com/lvgl/lv_port_esp32 f1427fa..0b51387 master -> origin/master Fetching submodule components/lvgl_esp32_drivers From https://github.com/lvgl/lvgl_esp32_drivers 6b1e219..1cda575 master -> origin/master Updating f1427fa..0b51387 Fast-forward CONTRIBUTE_CONTROLLER_SUPPORT.md | 149 ----------------------------------------------------------------------------------- README.md | 231 ++++++++++++++++++++++----------------------------------------------------------------------------------------------------------- components/lvgl_esp32_drivers | 2 +- main/CMakeLists.txt | 3 +- 4 files changed, 41 insertions(+), 344 deletions(-) delete mode 100644 CONTRIBUTE_CONTROLLER_SUPPORT.md

Unfortunately it's still showing the same issue.

I have an ILI9488 screen which I try and that one works like a charm every time FYI.

C47D commented 3 years ago

Thanks for trying on another display, the driver for the one you're using (RA) was shared by another user. I will take a look at it because I'm not familiar with it.

davidjade commented 3 years ago

@jhancharler I don't have this display so I can't check but I would start with a much lower clock rate as it could just be SPI corruption. Also make sure the right SPI duplex mode is configured. It looks like you are trying Full Duplex. Are you sure it is full duplex SPI? I bet it is not (full duplex means it sends and receives at the same time, unusual for a display).

can-caglar commented 3 years ago

@davidjade Thanks for your suggestion- I thought half-duplex might have been it, but unfortunately it didn't appear to solve the issue for me.

The SPI is being clocked at 1 MHz currently which is the slowest setting the menuconfig allows.

Note: When setting SPI to half-duplex, if it is making use of DMA for SPI transactions (like how this library does), we are only allowed to send or receive, but not both. So I had to comment out ra8875_read_cmd call within ra8875.c, otherwise it was throwing a runtime error.

Anyway, setting to half-duplex didn't solve the issue for me. Hopefully @C47D has better luck

C47D commented 3 years ago

Hi, there was a recent update on the lvgl_esp32_drivers and some symbol names weren't updated (see https://github.com/lvgl/lvgl_esp32_drivers/issues/5#issuecomment-757101320), can you try using this https://github.com/lvgl/lvgl_esp32_drivers/tree/fix/update_lvgl_helpers branch of lvgl_esp32_drivers?

C47D commented 3 years ago

This commit in particular updates the symbols used in your display driver https://github.com/lvgl/lvgl_esp32_drivers/commit/6a451cacf7d217965b66ff72afc015f51aa0a7b8

can-caglar commented 3 years ago

Thanks @C47D , I will update this thread when I try it. I can't get round to it now but will post when I do. Thanks again for the suggestion.

C47D commented 3 years ago

That's ok, I will update if I find something else.

C47D commented 3 years ago

Hi @jhancharler , did you had any chance to test the changes?

d42ohpaz commented 3 years ago

I'm in this boat too, except I'm getting a blank screen. What can I provide to assist? I'm using the latest master from lv_esp32_drivers (https://github.com/lvgl/lvgl_esp32_drivers/commit/72e2e765eb54409f3baa2c89c85455c3ac342246) and the latest master (https://github.com/lvgl/lv_port_esp32/commit/f2e80cbf37cb2848701c3bf83eafdfc5d5b1ed1f) from this repository. Here is my output:

rst:0x1 (POWERON_RESET),boot:0x17 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:7400
load:0x40078000,len:15000
load:0x40080400,len:4388
0x40080400: _init at ??:?

entry 0x40080694
I (27) boot: ESP-IDF v4.4-dev-4-g73db14240-dirty 2nd stage bootloader
I (27) boot: compile time 14:45:12
I (28) boot: chip revision: 1
I (31) boot_comm: chip revision: 1, min. bootloader chip revision: 0
I (38) qio_mode: Enabling default flash chip QIO
I (44) boot.esp32: SPI Speed      : 40MHz
I (48) boot.esp32: SPI Mode       : QIO
I (53) boot.esp32: SPI Flash Size : 4MB
I (57) boot: Enabling RNG early entropy source...
I (63) boot: Partition Table:
I (66) boot: ## Label            Usage          Type ST Offset   Length
I (74) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (81) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (89) boot:  2 factory          factory app      00 00 00010000 00100000
I (96) boot: End of partition table
I (100) boot_comm: chip revision: 1, min. application chip revision: 0
I (107) esp_image: segment 0: paddr=00010020 vaddr=3f400020 size=24fa4h (151460) map
I (161) esp_image: segment 1: paddr=00034fcc vaddr=3ffb0000 size=03194h ( 12692) load
I (166) esp_image: segment 2: paddr=00038168 vaddr=40080000 size=07eb0h ( 32432) load
I (179) esp_image: segment 3: paddr=00040020 vaddr=400d0020 size=3b2e0h (242400) map
I (251) esp_image: segment 4: paddr=0007b308 vaddr=40087eb0 size=04a34h ( 18996) load
I (265) boot: Loaded app from partition at offset 0x10000
I (265) boot: Disabling RNG early entropy source...
I (277) cpu_start: Pro cpu up.
I (277) cpu_start: Starting app cpu, entry point is 0x400810dc
0x400810dc: call_start_cpu1 at /Users/kstanl27/Downloads/esp-idf-v4.2/components/esp_system/port/cpu_start.c:143

I (0) cpu_start: App cpu up.
I (293) cpu_start: Pro cpu start user code
I (293) cpu_start: cpu freq: 240000000
I (293) cpu_start: Application information:
I (298) cpu_start: Project name:     lvgl-demo
I (303) cpu_start: App version:      v2.0-55-gf2e80cb
I (309) cpu_start: Compile time:     Feb 24 2021 15:11:11
I (315) cpu_start: ELF file SHA256:  8f5d30343ae4fa73...
I (321) cpu_start: ESP-IDF:          v4.4-dev-4-g73db14240-dirty
I (328) heap_init: Initializing. RAM available for dynamic allocation:
I (335) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM
I (341) heap_init: At 3FFBC600 len 00023A00 (142 KiB): DRAM
I (347) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM
I (353) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM
I (360) heap_init: At 4008C8E4 len 0001371C (77 KiB): IRAM
I (367) spi_flash: detected chip: generic
I (371) spi_flash: flash io: qio
I (376) cpu_start: Starting scheduler on PRO CPU.
I (0) cpu_start: Starting scheduler on APP CPU.
Info: lv_init ready     (lv_obj.c #231 lv_init())
I (20) lvgl_helpers: Display hor size: 800, ver size: 480
I (20) lvgl_helpers: Display buffer size: 32000
I (30) lvgl_helpers: Initializing SPI master for display
I (30) lvgl_helpers: Configuring SPI host VSPI_HOST (2)
I (30) lvgl_helpers: MISO pin: 19, MOSI pin: 23, SCLK pin: 18, IO2/WP pin: -1, IO3/HD pin: -1
I (50) lvgl_helpers: Max transfer size: 64000 (bytes)
I (50) lvgl_helpers: Initializing SPI bus...
I (50) disp_spi: Adding SPI device
I (60) disp_spi: Clock speed: 40000000Hz, mode: 0, CS pin: 5
I (70) RA8875: Initializing RA8875...
I (270) disp_spi: Changing SPI device clock speed: 1000000
I (270) gpio: GPIO[5]| InputEn: 0| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0 
I (270) disp_spi: Adding SPI device
I (280) disp_spi: Clock speed: 1000000Hz, mode: 0, CS pin: 5
I (330) disp_spi: Changing SPI device clock speed: 40000000
I (330) gpio: GPIO[5]| InputEn: 0| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0 
I (330) disp_spi: Adding SPI device
I (340) disp_spi: Clock speed: 40000000Hz, mode: 0, CS pin: 5
E (350) spi_master: check_trans_valid(696): SPI half duplex mode does not support using DMA with both MOSI and MISO phases.
I (360) RA8875: Enabling display.
I (370) RA8875: Enabling backlight.
Info: Object create ready   (lv_obj.c #461 lv_obj_create())
Info: Object create ready   (lv_obj.c #461 lv_obj_create())
Info: Object create ready   (lv_obj.c #461 lv_obj_create())
Info: Object create ready   (lv_obj.c #461 lv_obj_create())
Info: label created     (lv_label.c #165 lv_label_create())
Info: Object create ready   (lv_obj.c #461 lv_obj_create())
Info: label created     (lv_label.c #165 lv_label_create())
Info: Object create ready   (lv_obj.c #461 lv_obj_create())
Info: Object create ready   (lv_obj.c #461 lv_obj_create())
Info: Object create ready   (lv_obj.c #461 lv_obj_create())
Info: Object create ready   (lv_obj.c #461 lv_obj_create())
Info: Object create ready   (lv_obj.c #461 lv_obj_create())
Info: Object create ready   (lv_obj.c #461 lv_obj_create())
Info: Object create ready   (lv_obj.c #461 lv_obj_create())
Info: Object create ready   (lv_obj.c #461 lv_obj_create())
Info: Object create ready   (lv_obj.c #461 lv_obj_create())
Info: Object create ready   (lv_obj.c #461 lv_obj_create())
Info: Object create ready   (lv_obj.c #461 lv_obj_create())
Info: Object create ready   (lv_obj.c #461 lv_obj_create())
Info: Object create ready   (lv_obj.c #461 lv_obj_create())
Info: Object create ready   (lv_obj.c #461 lv_obj_create())
Info: Object create ready   (lv_obj.c #461 lv_obj_create())
Info: Object create ready   (lv_obj.c #461 lv_obj_create())
Info: Object create ready   (lv_obj.c #461 lv_obj_create())
Info: Object create ready   (lv_obj.c #461 lv_obj_create())
Info: Object create ready   (lv_obj.c #461 lv_obj_create())
Info: Object create ready   (lv_obj.c #461 lv_obj_create())
Info: Object create ready   (lv_obj.c #461 lv_obj_create())
Info: Object create ready   (lv_obj.c #461 lv_obj_create())
Info: Object create ready   (lv_obj.c #461 lv_obj_create())
Info: Object create ready   (lv_obj.c #461 lv_obj_create())
Info: Object create ready   (lv_obj.c #461 lv_obj_create())

Here is my config:

#
# Automatically generated file. DO NOT EDIT.
# Espressif IoT Development Framework (ESP-IDF) Project Configuration
#
CONFIG_IDF_CMAKE=y
CONFIG_IDF_TARGET_ARCH_XTENSA=y
CONFIG_IDF_TARGET="esp32"
CONFIG_IDF_TARGET_ESP32=y
CONFIG_IDF_FIRMWARE_CHIP_ID=0x0000

#
# SDK tool configuration
#
CONFIG_SDK_TOOLPREFIX="xtensa-esp32-elf-"
# CONFIG_SDK_TOOLCHAIN_SUPPORTS_TIME_WIDE_64_BITS is not set
# end of SDK tool configuration

#
# Build type
#
CONFIG_APP_BUILD_TYPE_APP_2NDBOOT=y
# CONFIG_APP_BUILD_TYPE_ELF_RAM is not set
CONFIG_APP_BUILD_GENERATE_BINARIES=y
CONFIG_APP_BUILD_BOOTLOADER=y
CONFIG_APP_BUILD_USE_FLASH_SECTIONS=y
# end of Build type

#
# Application manager
#
CONFIG_APP_COMPILE_TIME_DATE=y
# CONFIG_APP_EXCLUDE_PROJECT_VER_VAR is not set
# CONFIG_APP_EXCLUDE_PROJECT_NAME_VAR is not set
# CONFIG_APP_PROJECT_VER_FROM_CONFIG is not set
CONFIG_APP_RETRIEVE_LEN_ELF_SHA=16
# end of Application manager

#
# Bootloader config
#
CONFIG_BOOTLOADER_OFFSET_IN_FLASH=0x1000
CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y
# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_DEBUG is not set
# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_PERF is not set
# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_NONE is not set
# CONFIG_BOOTLOADER_LOG_LEVEL_NONE is not set
# CONFIG_BOOTLOADER_LOG_LEVEL_ERROR is not set
# CONFIG_BOOTLOADER_LOG_LEVEL_WARN is not set
CONFIG_BOOTLOADER_LOG_LEVEL_INFO=y
# CONFIG_BOOTLOADER_LOG_LEVEL_DEBUG is not set
# CONFIG_BOOTLOADER_LOG_LEVEL_VERBOSE is not set
CONFIG_BOOTLOADER_LOG_LEVEL=3
# CONFIG_BOOTLOADER_SPI_CUSTOM_WP_PIN is not set
CONFIG_BOOTLOADER_SPI_WP_PIN=7
# CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_8V is not set
CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V=y
# CONFIG_BOOTLOADER_FACTORY_RESET is not set
# CONFIG_BOOTLOADER_APP_TEST is not set
CONFIG_BOOTLOADER_WDT_ENABLE=y
# CONFIG_BOOTLOADER_WDT_DISABLE_IN_USER_CODE is not set
CONFIG_BOOTLOADER_WDT_TIME_MS=9000
# CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE is not set
# CONFIG_BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP is not set
CONFIG_BOOTLOADER_RESERVE_RTC_SIZE=0
# CONFIG_BOOTLOADER_CUSTOM_RESERVE_RTC is not set
# end of Bootloader config

#
# Security features
#
# CONFIG_SECURE_SIGNED_APPS_NO_SECURE_BOOT is not set
# CONFIG_SECURE_BOOT is not set
# CONFIG_SECURE_FLASH_ENC_ENABLED is not set
# end of Security features

#
# Serial flasher config
#
CONFIG_ESPTOOLPY_BAUD_OTHER_VAL=115200
# CONFIG_ESPTOOLPY_NO_STUB is not set
CONFIG_ESPTOOLPY_FLASHMODE_QIO=y
# CONFIG_ESPTOOLPY_FLASHMODE_QOUT is not set
# CONFIG_ESPTOOLPY_FLASHMODE_DIO is not set
# CONFIG_ESPTOOLPY_FLASHMODE_DOUT is not set
CONFIG_ESPTOOLPY_FLASHMODE="dio"
# CONFIG_ESPTOOLPY_FLASHFREQ_80M is not set
CONFIG_ESPTOOLPY_FLASHFREQ_40M=y
# CONFIG_ESPTOOLPY_FLASHFREQ_26M is not set
# CONFIG_ESPTOOLPY_FLASHFREQ_20M is not set
CONFIG_ESPTOOLPY_FLASHFREQ="40m"
# CONFIG_ESPTOOLPY_FLASHSIZE_1MB is not set
# CONFIG_ESPTOOLPY_FLASHSIZE_2MB is not set
CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
# CONFIG_ESPTOOLPY_FLASHSIZE_8MB is not set
# CONFIG_ESPTOOLPY_FLASHSIZE_16MB is not set
CONFIG_ESPTOOLPY_FLASHSIZE="4MB"
CONFIG_ESPTOOLPY_FLASHSIZE_DETECT=y
CONFIG_ESPTOOLPY_BEFORE_RESET=y
# CONFIG_ESPTOOLPY_BEFORE_NORESET is not set
CONFIG_ESPTOOLPY_BEFORE="default_reset"
CONFIG_ESPTOOLPY_AFTER_RESET=y
# CONFIG_ESPTOOLPY_AFTER_NORESET is not set
CONFIG_ESPTOOLPY_AFTER="hard_reset"
# CONFIG_ESPTOOLPY_MONITOR_BAUD_CONSOLE is not set
# CONFIG_ESPTOOLPY_MONITOR_BAUD_9600B is not set
# CONFIG_ESPTOOLPY_MONITOR_BAUD_57600B is not set
CONFIG_ESPTOOLPY_MONITOR_BAUD_115200B=y
# CONFIG_ESPTOOLPY_MONITOR_BAUD_230400B is not set
# CONFIG_ESPTOOLPY_MONITOR_BAUD_921600B is not set
# CONFIG_ESPTOOLPY_MONITOR_BAUD_2MB is not set
# CONFIG_ESPTOOLPY_MONITOR_BAUD_OTHER is not set
CONFIG_ESPTOOLPY_MONITOR_BAUD_OTHER_VAL=115200
CONFIG_ESPTOOLPY_MONITOR_BAUD=115200
# end of Serial flasher config

#
# Partition Table
#
CONFIG_PARTITION_TABLE_SINGLE_APP=y
# CONFIG_PARTITION_TABLE_TWO_OTA is not set
# CONFIG_PARTITION_TABLE_CUSTOM is not set
CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"
CONFIG_PARTITION_TABLE_FILENAME="partitions_singleapp.csv"
CONFIG_PARTITION_TABLE_OFFSET=0x8000
CONFIG_PARTITION_TABLE_MD5=y
# end of Partition Table

#
# Compiler options
#
CONFIG_COMPILER_OPTIMIZATION_DEFAULT=y
# CONFIG_COMPILER_OPTIMIZATION_SIZE is not set
# CONFIG_COMPILER_OPTIMIZATION_PERF is not set
# CONFIG_COMPILER_OPTIMIZATION_NONE is not set
CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE=y
# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT is not set
# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE is not set
# CONFIG_COMPILER_CXX_EXCEPTIONS is not set
# CONFIG_COMPILER_CXX_RTTI is not set
CONFIG_COMPILER_STACK_CHECK_MODE_NONE=y
# CONFIG_COMPILER_STACK_CHECK_MODE_NORM is not set
# CONFIG_COMPILER_STACK_CHECK_MODE_STRONG is not set
# CONFIG_COMPILER_STACK_CHECK_MODE_ALL is not set
# CONFIG_COMPILER_WARN_WRITE_STRINGS is not set
# CONFIG_COMPILER_DISABLE_GCC8_WARNINGS is not set
# CONFIG_COMPILER_DUMP_RTL_FILES is not set
# end of Compiler options

#
# Component config
#

#
# Application Level Tracing
#
# CONFIG_APPTRACE_DEST_TRAX is not set
CONFIG_APPTRACE_DEST_NONE=y
CONFIG_APPTRACE_LOCK_ENABLE=y
# end of Application Level Tracing

#
# ESP-ASIO
#
# CONFIG_ASIO_SSL_SUPPORT is not set
# end of ESP-ASIO

#
# Bluetooth
#
# CONFIG_BT_ENABLED is not set
CONFIG_BTDM_CTRL_BR_EDR_SCO_DATA_PATH_EFF=0
CONFIG_BTDM_CTRL_PCM_ROLE_EFF=0
CONFIG_BTDM_CTRL_PCM_POLAR_EFF=0
CONFIG_BTDM_CTRL_BLE_MAX_CONN_EFF=0
CONFIG_BTDM_CTRL_BR_EDR_MAX_ACL_CONN_EFF=0
CONFIG_BTDM_CTRL_BR_EDR_MAX_SYNC_CONN_EFF=0
CONFIG_BTDM_CTRL_PINNED_TO_CORE=0
CONFIG_BTDM_BLE_SLEEP_CLOCK_ACCURACY_INDEX_EFF=1
CONFIG_BT_CTRL_MODE_EFF=1
CONFIG_BT_CTRL_BLE_MAX_ACT=10
CONFIG_BT_CTRL_BLE_MAX_ACT_EFF=10
CONFIG_BT_CTRL_BLE_STATIC_ACL_TX_BUF_NB=0
CONFIG_BT_CTRL_PINNED_TO_CORE=0
CONFIG_BT_CTRL_HCI_TL=1
CONFIG_BT_CTRL_ADV_DUP_FILT_MAX=30
CONFIG_BT_CTRL_HW_CCA_EFF=0
CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_EFF=0
CONFIG_BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_SUPP=y
CONFIG_BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_NUM=100
CONFIG_BT_CTRL_BLE_ADV_REPORT_DISCARD_THRSHOLD=20
CONFIG_BT_CTRL_BLE_SCAN_DUPL=y
CONFIG_BT_CTRL_SCAN_DUPL_TYPE=0
CONFIG_BT_CTRL_SCAN_DUPL_CACHE_SIZE=100
CONFIG_BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM_EFF=0
CONFIG_BT_CTRL_SLEEP_MODE_EFF=0
CONFIG_BT_CTRL_SLEEP_CLOCK_EFF=0
CONFIG_BT_CTRL_HCI_TL_EFF=1
CONFIG_BT_RESERVE_DRAM=0
# end of Bluetooth

#
# CoAP Configuration
#
CONFIG_COAP_MBEDTLS_PSK=y
# CONFIG_COAP_MBEDTLS_PKI is not set
# CONFIG_COAP_MBEDTLS_DEBUG is not set
CONFIG_COAP_LOG_DEFAULT_LEVEL=0
# end of CoAP Configuration

#
# Driver configurations
#

#
# ADC configuration
#
# CONFIG_ADC_FORCE_XPD_FSM is not set
CONFIG_ADC_DISABLE_DAC=y
# end of ADC configuration

#
# SPI configuration
#
# CONFIG_SPI_MASTER_IN_IRAM is not set
CONFIG_SPI_MASTER_ISR_IN_IRAM=y
# CONFIG_SPI_SLAVE_IN_IRAM is not set
CONFIG_SPI_SLAVE_ISR_IN_IRAM=y
# end of SPI configuration

#
# TWAI configuration
#
# CONFIG_TWAI_ISR_IN_IRAM is not set
# end of TWAI configuration

#
# UART configuration
#
# CONFIG_UART_ISR_IN_IRAM is not set
# end of UART configuration

#
# RTCIO configuration
#
# CONFIG_RTCIO_SUPPORT_RTC_GPIO_DESC is not set
# end of RTCIO configuration

#
# GPIO Configuration
#
# CONFIG_GPIO_ESP32_SUPPORT_SWITCH_SLP_PULL is not set
# end of GPIO Configuration
# end of Driver configurations

#
# eFuse Bit Manager
#
# CONFIG_EFUSE_CUSTOM_TABLE is not set
# CONFIG_EFUSE_VIRTUAL is not set
# CONFIG_EFUSE_CODE_SCHEME_COMPAT_NONE is not set
CONFIG_EFUSE_CODE_SCHEME_COMPAT_3_4=y
# CONFIG_EFUSE_CODE_SCHEME_COMPAT_REPEAT is not set
CONFIG_EFUSE_MAX_BLK_LEN=192
# end of eFuse Bit Manager

#
# ESP-TLS
#
CONFIG_ESP_TLS_USING_MBEDTLS=y
# CONFIG_ESP_TLS_USE_SECURE_ELEMENT is not set
# CONFIG_ESP_TLS_SERVER is not set
# CONFIG_ESP_TLS_PSK_VERIFICATION is not set
# CONFIG_ESP_TLS_INSECURE is not set
# end of ESP-TLS

#
# ESP32-specific
#
CONFIG_ESP32_REV_MIN_0=y
# CONFIG_ESP32_REV_MIN_1 is not set
# CONFIG_ESP32_REV_MIN_2 is not set
# CONFIG_ESP32_REV_MIN_3 is not set
CONFIG_ESP32_REV_MIN=0
CONFIG_ESP32_DPORT_WORKAROUND=y
# CONFIG_ESP32_DEFAULT_CPU_FREQ_80 is not set
# CONFIG_ESP32_DEFAULT_CPU_FREQ_160 is not set
CONFIG_ESP32_DEFAULT_CPU_FREQ_240=y
CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ=240
# CONFIG_ESP32_SPIRAM_SUPPORT is not set
# CONFIG_ESP32_TRAX is not set
CONFIG_ESP32_TRACEMEM_RESERVE_DRAM=0x0
# CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_TWO is not set
CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_FOUR=y
CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES=4
# CONFIG_ESP32_ULP_COPROC_ENABLED is not set
CONFIG_ESP32_ULP_COPROC_RESERVE_MEM=0
CONFIG_ESP32_DEBUG_OCDAWARE=y
CONFIG_ESP32_BROWNOUT_DET=y
CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_0=y
# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_1 is not set
# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_2 is not set
# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_3 is not set
# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_4 is not set
# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_5 is not set
# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_6 is not set
# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_7 is not set
CONFIG_ESP32_BROWNOUT_DET_LVL=0
CONFIG_ESP32_REDUCE_PHY_TX_POWER=y
CONFIG_ESP32_TIME_SYSCALL_USE_RTC_FRC1=y
# CONFIG_ESP32_TIME_SYSCALL_USE_RTC is not set
# CONFIG_ESP32_TIME_SYSCALL_USE_FRC1 is not set
# CONFIG_ESP32_TIME_SYSCALL_USE_NONE is not set
CONFIG_ESP32_RTC_CLK_SRC_INT_RC=y
# CONFIG_ESP32_RTC_CLK_SRC_EXT_CRYS is not set
# CONFIG_ESP32_RTC_CLK_SRC_EXT_OSC is not set
# CONFIG_ESP32_RTC_CLK_SRC_INT_8MD256 is not set
CONFIG_ESP32_RTC_CLK_CAL_CYCLES=1024
CONFIG_ESP32_DEEP_SLEEP_WAKEUP_DELAY=2000
CONFIG_ESP32_XTAL_FREQ_40=y
# CONFIG_ESP32_XTAL_FREQ_26 is not set
# CONFIG_ESP32_XTAL_FREQ_AUTO is not set
CONFIG_ESP32_XTAL_FREQ=40
# CONFIG_ESP32_DISABLE_BASIC_ROM_CONSOLE is not set
# CONFIG_ESP32_NO_BLOBS is not set
# CONFIG_ESP32_COMPATIBLE_PRE_V2_1_BOOTLOADERS is not set
# CONFIG_ESP32_USE_FIXED_STATIC_RAM_SIZE is not set
CONFIG_ESP32_DPORT_DIS_INTERRUPT_LVL=5
# end of ESP32-specific

#
# ADC-Calibration
#
CONFIG_ADC_CAL_EFUSE_TP_ENABLE=y
CONFIG_ADC_CAL_EFUSE_VREF_ENABLE=y
CONFIG_ADC_CAL_LUT_ENABLE=y
# end of ADC-Calibration

#
# Common ESP-related
#
CONFIG_ESP_ERR_TO_NAME_LOOKUP=y
CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE=32
CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=2304
CONFIG_ESP_MAIN_TASK_STACK_SIZE=3584
CONFIG_ESP_IPC_TASK_STACK_SIZE=1024
CONFIG_ESP_IPC_USES_CALLERS_PRIORITY=y
CONFIG_ESP_MINIMAL_SHARED_STACK_SIZE=2048
CONFIG_ESP_CONSOLE_UART_DEFAULT=y
# CONFIG_ESP_CONSOLE_UART_CUSTOM is not set
# CONFIG_ESP_CONSOLE_NONE is not set
CONFIG_ESP_CONSOLE_UART=y
CONFIG_ESP_CONSOLE_MULTIPLE_UART=y
CONFIG_ESP_CONSOLE_UART_NUM=0
CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200
CONFIG_ESP_INT_WDT=y
CONFIG_ESP_INT_WDT_TIMEOUT_MS=300
CONFIG_ESP_INT_WDT_CHECK_CPU1=y
CONFIG_ESP_TASK_WDT=y
# CONFIG_ESP_TASK_WDT_PANIC is not set
CONFIG_ESP_TASK_WDT_TIMEOUT_S=5
CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0=y
CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1=y
# CONFIG_ESP_PANIC_HANDLER_IRAM is not set
CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_STA=y
CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_AP=y
CONFIG_ESP_MAC_ADDR_UNIVERSE_BT=y
CONFIG_ESP_MAC_ADDR_UNIVERSE_BT_OFFSET=2
CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH=y
# end of Common ESP-related

#
# Ethernet
#
CONFIG_ETH_ENABLED=y
CONFIG_ETH_USE_ESP32_EMAC=y
CONFIG_ETH_PHY_INTERFACE_RMII=y
# CONFIG_ETH_PHY_INTERFACE_MII is not set
CONFIG_ETH_RMII_CLK_INPUT=y
# CONFIG_ETH_RMII_CLK_OUTPUT is not set
CONFIG_ETH_RMII_CLK_IN_GPIO=0
CONFIG_ETH_DMA_BUFFER_SIZE=512
CONFIG_ETH_DMA_RX_BUFFER_NUM=10
CONFIG_ETH_DMA_TX_BUFFER_NUM=10
CONFIG_ETH_USE_SPI_ETHERNET=y
# CONFIG_ETH_SPI_ETHERNET_DM9051 is not set
# CONFIG_ETH_SPI_ETHERNET_W5500 is not set
# CONFIG_ETH_USE_OPENETH is not set
# end of Ethernet

#
# Event Loop Library
#
# CONFIG_ESP_EVENT_LOOP_PROFILING is not set
CONFIG_ESP_EVENT_POST_FROM_ISR=y
CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR=y
# end of Event Loop Library

#
# GDB Stub
#
# end of GDB Stub

#
# ESP HTTP client
#
CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS=y
# CONFIG_ESP_HTTP_CLIENT_ENABLE_BASIC_AUTH is not set
# end of ESP HTTP client

#
# HTTP Server
#
CONFIG_HTTPD_MAX_REQ_HDR_LEN=512
CONFIG_HTTPD_MAX_URI_LEN=512
CONFIG_HTTPD_ERR_RESP_NO_DELAY=y
CONFIG_HTTPD_PURGE_BUF_LEN=32
# CONFIG_HTTPD_LOG_PURGE_DATA is not set
# CONFIG_HTTPD_WS_SUPPORT is not set
# end of HTTP Server

#
# ESP HTTPS OTA
#
# CONFIG_OTA_ALLOW_HTTP is not set
# end of ESP HTTPS OTA

#
# ESP HTTPS server
#
# CONFIG_ESP_HTTPS_SERVER_ENABLE is not set
# end of ESP HTTPS server

#
# ESP NETIF Adapter
#
CONFIG_ESP_NETIF_IP_LOST_TIMER_INTERVAL=120
CONFIG_ESP_NETIF_TCPIP_LWIP=y
# CONFIG_ESP_NETIF_LOOPBACK is not set
CONFIG_ESP_NETIF_TCPIP_ADAPTER_COMPATIBLE_LAYER=y
# end of ESP NETIF Adapter

#
# Power Management
#
# CONFIG_PM_ENABLE is not set
# end of Power Management

#
# ESP System Settings
#
# CONFIG_ESP_SYSTEM_PANIC_PRINT_HALT is not set
CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT=y
# CONFIG_ESP_SYSTEM_PANIC_SILENT_REBOOT is not set
# CONFIG_ESP_SYSTEM_PANIC_GDBSTUB is not set
CONFIG_ESP_SYSTEM_PD_FLASH=y

#
# Memory protection
#
# end of Memory protection
# end of ESP System Settings

#
# High resolution timer (esp_timer)
#
# CONFIG_ESP_TIMER_PROFILING is not set
CONFIG_ESP_TIME_FUNCS_USE_RTC_TIMER=y
CONFIG_ESP_TIME_FUNCS_USE_ESP_TIMER=y
CONFIG_ESP_TIMER_TASK_STACK_SIZE=3584
# CONFIG_ESP_TIMER_IMPL_FRC2 is not set
CONFIG_ESP_TIMER_IMPL_TG0_LAC=y
# end of High resolution timer (esp_timer)

#
# Wi-Fi
#
CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=10
CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=32
# CONFIG_ESP32_WIFI_STATIC_TX_BUFFER is not set
CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER=y
CONFIG_ESP32_WIFI_TX_BUFFER_TYPE=1
CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM=32
# CONFIG_ESP32_WIFI_CSI_ENABLED is not set
CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED=y
CONFIG_ESP32_WIFI_TX_BA_WIN=6
CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y
CONFIG_ESP32_WIFI_RX_BA_WIN=6
CONFIG_ESP32_WIFI_NVS_ENABLED=y
CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_0=y
# CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_1 is not set
CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN=752
CONFIG_ESP32_WIFI_MGMT_SBUF_NUM=32
# CONFIG_ESP32_WIFI_DEBUG_LOG_ENABLE is not set
CONFIG_ESP32_WIFI_IRAM_OPT=y
CONFIG_ESP32_WIFI_RX_IRAM_OPT=y
CONFIG_ESP32_WIFI_ENABLE_WPA3_SAE=y
# CONFIG_ESP_WIFI_SLP_IRAM_OPT is not set
# end of Wi-Fi

#
# PHY
#
CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE=y
# CONFIG_ESP32_PHY_INIT_DATA_IN_PARTITION is not set
CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER=20
CONFIG_ESP32_PHY_MAX_TX_POWER=20
# end of PHY

#
# Core dump
#
# CONFIG_ESP_COREDUMP_ENABLE_TO_FLASH is not set
# CONFIG_ESP_COREDUMP_ENABLE_TO_UART is not set
CONFIG_ESP_COREDUMP_ENABLE_TO_NONE=y
# end of Core dump

#
# FAT Filesystem support
#
# CONFIG_FATFS_CODEPAGE_DYNAMIC is not set
CONFIG_FATFS_CODEPAGE_437=y
# CONFIG_FATFS_CODEPAGE_720 is not set
# CONFIG_FATFS_CODEPAGE_737 is not set
# CONFIG_FATFS_CODEPAGE_771 is not set
# CONFIG_FATFS_CODEPAGE_775 is not set
# CONFIG_FATFS_CODEPAGE_850 is not set
# CONFIG_FATFS_CODEPAGE_852 is not set
# CONFIG_FATFS_CODEPAGE_855 is not set
# CONFIG_FATFS_CODEPAGE_857 is not set
# CONFIG_FATFS_CODEPAGE_860 is not set
# CONFIG_FATFS_CODEPAGE_861 is not set
# CONFIG_FATFS_CODEPAGE_862 is not set
# CONFIG_FATFS_CODEPAGE_863 is not set
# CONFIG_FATFS_CODEPAGE_864 is not set
# CONFIG_FATFS_CODEPAGE_865 is not set
# CONFIG_FATFS_CODEPAGE_866 is not set
# CONFIG_FATFS_CODEPAGE_869 is not set
# CONFIG_FATFS_CODEPAGE_932 is not set
# CONFIG_FATFS_CODEPAGE_936 is not set
# CONFIG_FATFS_CODEPAGE_949 is not set
# CONFIG_FATFS_CODEPAGE_950 is not set
CONFIG_FATFS_CODEPAGE=437
CONFIG_FATFS_LFN_NONE=y
# CONFIG_FATFS_LFN_HEAP is not set
# CONFIG_FATFS_LFN_STACK is not set
CONFIG_FATFS_FS_LOCK=0
CONFIG_FATFS_TIMEOUT_MS=10000
CONFIG_FATFS_PER_FILE_CACHE=y
# CONFIG_FATFS_USE_FASTSEEK is not set
# end of FAT Filesystem support

#
# Modbus configuration
#
CONFIG_FMB_COMM_MODE_TCP_EN=y
CONFIG_FMB_TCP_PORT_DEFAULT=502
CONFIG_FMB_TCP_PORT_MAX_CONN=5
CONFIG_FMB_TCP_CONNECTION_TOUT_SEC=20
CONFIG_FMB_COMM_MODE_RTU_EN=y
CONFIG_FMB_COMM_MODE_ASCII_EN=y
CONFIG_FMB_MASTER_TIMEOUT_MS_RESPOND=150
CONFIG_FMB_MASTER_DELAY_MS_CONVERT=200
CONFIG_FMB_QUEUE_LENGTH=20
CONFIG_FMB_PORT_TASK_STACK_SIZE=4096
CONFIG_FMB_SERIAL_BUF_SIZE=256
CONFIG_FMB_SERIAL_ASCII_BITS_PER_SYMB=8
CONFIG_FMB_SERIAL_ASCII_TIMEOUT_RESPOND_MS=1000
CONFIG_FMB_PORT_TASK_PRIO=10
CONFIG_FMB_CONTROLLER_SLAVE_ID_SUPPORT=y
CONFIG_FMB_CONTROLLER_SLAVE_ID=0x00112233
CONFIG_FMB_CONTROLLER_NOTIFY_TIMEOUT=20
CONFIG_FMB_CONTROLLER_NOTIFY_QUEUE_SIZE=20
CONFIG_FMB_CONTROLLER_STACK_SIZE=4096
CONFIG_FMB_EVENT_QUEUE_TIMEOUT=20
CONFIG_FMB_TIMER_PORT_ENABLED=y
CONFIG_FMB_TIMER_GROUP=0
CONFIG_FMB_TIMER_INDEX=0
# CONFIG_FMB_TIMER_ISR_IN_IRAM is not set
# end of Modbus configuration

#
# FreeRTOS
#
# CONFIG_FREERTOS_UNICORE is not set
CONFIG_FREERTOS_NO_AFFINITY=0x7FFFFFFF
CONFIG_FREERTOS_CORETIMER_0=y
# CONFIG_FREERTOS_CORETIMER_1 is not set
CONFIG_FREERTOS_HZ=100
CONFIG_FREERTOS_ASSERT_ON_UNTESTED_FUNCTION=y
# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_NONE is not set
# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_PTRVAL is not set
CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY=y
# CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK is not set
CONFIG_FREERTOS_INTERRUPT_BACKTRACE=y
CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS=1
CONFIG_FREERTOS_ASSERT_FAIL_ABORT=y
# CONFIG_FREERTOS_ASSERT_FAIL_PRINT_CONTINUE is not set
# CONFIG_FREERTOS_ASSERT_DISABLE is not set
CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=2304
CONFIG_FREERTOS_ISR_STACKSIZE=1536
# CONFIG_FREERTOS_LEGACY_HOOKS is not set
CONFIG_FREERTOS_MAX_TASK_NAME_LEN=16
CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y
# CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP is not set
CONFIG_FREERTOS_TIMER_TASK_PRIORITY=1
CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH=2048
CONFIG_FREERTOS_TIMER_QUEUE_LENGTH=10
CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE=0
# CONFIG_FREERTOS_USE_TRACE_FACILITY is not set
# CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS is not set
CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER=y
CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER=y
# CONFIG_FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE is not set
# CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH is not set
CONFIG_FREERTOS_DEBUG_OCDAWARE=y
# CONFIG_FREERTOS_FPU_IN_ISR is not set
# end of FreeRTOS

#
# Heap memory debugging
#
CONFIG_HEAP_POISONING_DISABLED=y
# CONFIG_HEAP_POISONING_LIGHT is not set
# CONFIG_HEAP_POISONING_COMPREHENSIVE is not set
CONFIG_HEAP_TRACING_OFF=y
# CONFIG_HEAP_TRACING_STANDALONE is not set
# CONFIG_HEAP_TRACING_TOHOST is not set
# CONFIG_HEAP_ABORT_WHEN_ALLOCATION_FAILS is not set
# end of Heap memory debugging

#
# jsmn
#
# CONFIG_JSMN_PARENT_LINKS is not set
# CONFIG_JSMN_STRICT is not set
# end of jsmn

#
# libsodium
#
# end of libsodium

#
# Log output
#
# CONFIG_LOG_DEFAULT_LEVEL_NONE is not set
# CONFIG_LOG_DEFAULT_LEVEL_ERROR is not set
# CONFIG_LOG_DEFAULT_LEVEL_WARN is not set
CONFIG_LOG_DEFAULT_LEVEL_INFO=y
# CONFIG_LOG_DEFAULT_LEVEL_DEBUG is not set
# CONFIG_LOG_DEFAULT_LEVEL_VERBOSE is not set
CONFIG_LOG_DEFAULT_LEVEL=3
CONFIG_LOG_COLORS=y
CONFIG_LOG_TIMESTAMP_SOURCE_RTOS=y
# CONFIG_LOG_TIMESTAMP_SOURCE_SYSTEM is not set
# end of Log output

#
# LWIP
#
CONFIG_LWIP_LOCAL_HOSTNAME="espressif"
CONFIG_LWIP_DNS_SUPPORT_MDNS_QUERIES=y
# CONFIG_LWIP_L2_TO_L3_COPY is not set
# CONFIG_LWIP_IRAM_OPTIMIZATION is not set
CONFIG_LWIP_TIMERS_ONDEMAND=y
CONFIG_LWIP_MAX_SOCKETS=10
# CONFIG_LWIP_USE_ONLY_LWIP_SELECT is not set
# CONFIG_LWIP_SO_LINGER is not set
CONFIG_LWIP_SO_REUSE=y
CONFIG_LWIP_SO_REUSE_RXTOALL=y
# CONFIG_LWIP_SO_RCVBUF is not set
# CONFIG_LWIP_NETBUF_RECVINFO is not set
CONFIG_LWIP_IP4_FRAG=y
CONFIG_LWIP_IP6_FRAG=y
# CONFIG_LWIP_IP4_REASSEMBLY is not set
# CONFIG_LWIP_IP6_REASSEMBLY is not set
# CONFIG_LWIP_IP_FORWARD is not set
# CONFIG_LWIP_STATS is not set
# CONFIG_LWIP_ETHARP_TRUST_IP_MAC is not set
CONFIG_LWIP_ESP_GRATUITOUS_ARP=y
CONFIG_LWIP_GARP_TMR_INTERVAL=60
CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=32
CONFIG_LWIP_DHCP_DOES_ARP_CHECK=y
# CONFIG_LWIP_DHCP_RESTORE_LAST_IP is not set

#
# DHCP server
#
CONFIG_LWIP_DHCPS_LEASE_UNIT=60
CONFIG_LWIP_DHCPS_MAX_STATION_NUM=8
# end of DHCP server

# CONFIG_LWIP_AUTOIP is not set
# CONFIG_LWIP_IPV6_AUTOCONFIG is not set
CONFIG_LWIP_NETIF_LOOPBACK=y
CONFIG_LWIP_LOOPBACK_MAX_PBUFS=8

#
# TCP
#
CONFIG_LWIP_MAX_ACTIVE_TCP=16
CONFIG_LWIP_MAX_LISTENING_TCP=16
CONFIG_LWIP_TCP_HIGH_SPEED_RETRANSMISSION=y
CONFIG_LWIP_TCP_MAXRTX=12
CONFIG_LWIP_TCP_SYNMAXRTX=12
CONFIG_LWIP_TCP_MSS=1440
CONFIG_LWIP_TCP_TMR_INTERVAL=250
CONFIG_LWIP_TCP_MSL=60000
CONFIG_LWIP_TCP_SND_BUF_DEFAULT=5744
CONFIG_LWIP_TCP_WND_DEFAULT=5744
CONFIG_LWIP_TCP_RECVMBOX_SIZE=6
CONFIG_LWIP_TCP_QUEUE_OOSEQ=y
# CONFIG_LWIP_TCP_SACK_OUT is not set
# CONFIG_LWIP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES is not set
CONFIG_LWIP_TCP_OVERSIZE_MSS=y
# CONFIG_LWIP_TCP_OVERSIZE_QUARTER_MSS is not set
# CONFIG_LWIP_TCP_OVERSIZE_DISABLE is not set
CONFIG_LWIP_TCP_RTO_TIME=1500
# end of TCP

#
# UDP
#
CONFIG_LWIP_MAX_UDP_PCBS=16
CONFIG_LWIP_UDP_RECVMBOX_SIZE=6
# end of UDP

#
# Checksums
#
# CONFIG_LWIP_CHECKSUM_CHECK_IP is not set
# CONFIG_LWIP_CHECKSUM_CHECK_UDP is not set
CONFIG_LWIP_CHECKSUM_CHECK_ICMP=y
# end of Checksums

CONFIG_LWIP_TCPIP_TASK_STACK_SIZE=3072
CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY=y
# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU0 is not set
# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU1 is not set
CONFIG_LWIP_TCPIP_TASK_AFFINITY=0x7FFFFFFF
# CONFIG_LWIP_PPP_SUPPORT is not set
CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE=3
CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS=5
# CONFIG_LWIP_SLIP_SUPPORT is not set

#
# ICMP
#
# CONFIG_LWIP_MULTICAST_PING is not set
# CONFIG_LWIP_BROADCAST_PING is not set
# end of ICMP

#
# LWIP RAW API
#
CONFIG_LWIP_MAX_RAW_PCBS=16
# end of LWIP RAW API

#
# SNTP
#
CONFIG_LWIP_DHCP_MAX_NTP_SERVERS=1
CONFIG_LWIP_SNTP_UPDATE_DELAY=3600000
# end of SNTP

CONFIG_LWIP_ESP_LWIP_ASSERT=y

#
# Hooks
#
# CONFIG_LWIP_HOOK_TCP_ISN_NONE is not set
CONFIG_LWIP_HOOK_TCP_ISN_DEFAULT=y
# CONFIG_LWIP_HOOK_TCP_ISN_CUSTOM is not set
CONFIG_LWIP_HOOK_IP6_ROUTE_NONE=y
# CONFIG_LWIP_HOOK_IP6_ROUTE_DEFAULT is not set
# CONFIG_LWIP_HOOK_IP6_ROUTE_CUSTOM is not set
CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_NONE=y
# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_DEFAULT is not set
# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_CUSTOM is not set
# end of Hooks

#
# Debug
#
# CONFIG_LWIP_NETIF_DEBUG is not set
# CONFIG_LWIP_PBUF_DEBUG is not set
# CONFIG_LWIP_ETHARP_DEBUG is not set
# CONFIG_LWIP_API_LIB_DEBUG is not set
# CONFIG_LWIP_SOCKETS_DEBUG is not set
# CONFIG_LWIP_IP_DEBUG is not set
# CONFIG_LWIP_ICMP_DEBUG is not set
# CONFIG_LWIP_DHCP_STATE_DEBUG is not set
# CONFIG_LWIP_DHCP_DEBUG is not set
# CONFIG_LWIP_IP6_DEBUG is not set
# CONFIG_LWIP_ICMP6_DEBUG is not set
# CONFIG_LWIP_TCP_DEBUG is not set
# end of Debug
# end of LWIP

#
# mbedTLS
#
CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
# CONFIG_MBEDTLS_DEFAULT_MEM_ALLOC is not set
# CONFIG_MBEDTLS_CUSTOM_MEM_ALLOC is not set
CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=y
CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096
# CONFIG_MBEDTLS_DYNAMIC_BUFFER is not set
# CONFIG_MBEDTLS_DEBUG is not set

#
# Certificate Bundle
#
CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y
CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL=y
# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_CMN is not set
# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_NONE is not set
# CONFIG_MBEDTLS_CUSTOM_CERTIFICATE_BUNDLE is not set
# end of Certificate Bundle

# CONFIG_MBEDTLS_ECP_RESTARTABLE is not set
# CONFIG_MBEDTLS_CMAC_C is not set
CONFIG_MBEDTLS_HARDWARE_AES=y
CONFIG_MBEDTLS_HARDWARE_MPI=y
CONFIG_MBEDTLS_HARDWARE_SHA=y
# CONFIG_MBEDTLS_ATCA_HW_ECDSA_SIGN is not set
# CONFIG_MBEDTLS_ATCA_HW_ECDSA_VERIFY is not set
CONFIG_MBEDTLS_HAVE_TIME=y
# CONFIG_MBEDTLS_HAVE_TIME_DATE is not set
CONFIG_MBEDTLS_ECDSA_DETERMINISTIC=y
CONFIG_MBEDTLS_SHA512_C=y
CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT=y
# CONFIG_MBEDTLS_TLS_SERVER_ONLY is not set
# CONFIG_MBEDTLS_TLS_CLIENT_ONLY is not set
# CONFIG_MBEDTLS_TLS_DISABLED is not set
CONFIG_MBEDTLS_TLS_SERVER=y
CONFIG_MBEDTLS_TLS_CLIENT=y
CONFIG_MBEDTLS_TLS_ENABLED=y

#
# TLS Key Exchange Methods
#
# CONFIG_MBEDTLS_PSK_MODES is not set
CONFIG_MBEDTLS_KEY_EXCHANGE_RSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_RSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA=y
# end of TLS Key Exchange Methods

CONFIG_MBEDTLS_SSL_RENEGOTIATION=y
# CONFIG_MBEDTLS_SSL_PROTO_SSL3 is not set
CONFIG_MBEDTLS_SSL_PROTO_TLS1=y
CONFIG_MBEDTLS_SSL_PROTO_TLS1_1=y
CONFIG_MBEDTLS_SSL_PROTO_TLS1_2=y
# CONFIG_MBEDTLS_SSL_PROTO_DTLS is not set
CONFIG_MBEDTLS_SSL_ALPN=y
CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS=y
CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS=y

#
# Symmetric Ciphers
#
CONFIG_MBEDTLS_AES_C=y
# CONFIG_MBEDTLS_CAMELLIA_C is not set
# CONFIG_MBEDTLS_DES_C is not set
CONFIG_MBEDTLS_RC4_DISABLED=y
# CONFIG_MBEDTLS_RC4_ENABLED_NO_DEFAULT is not set
# CONFIG_MBEDTLS_RC4_ENABLED is not set
# CONFIG_MBEDTLS_BLOWFISH_C is not set
# CONFIG_MBEDTLS_XTEA_C is not set
CONFIG_MBEDTLS_CCM_C=y
CONFIG_MBEDTLS_GCM_C=y
# end of Symmetric Ciphers

# CONFIG_MBEDTLS_RIPEMD160_C is not set

#
# Certificates
#
CONFIG_MBEDTLS_PEM_PARSE_C=y
CONFIG_MBEDTLS_PEM_WRITE_C=y
CONFIG_MBEDTLS_X509_CRL_PARSE_C=y
CONFIG_MBEDTLS_X509_CSR_PARSE_C=y
# end of Certificates

CONFIG_MBEDTLS_ECP_C=y
CONFIG_MBEDTLS_ECDH_C=y
CONFIG_MBEDTLS_ECDSA_C=y
# CONFIG_MBEDTLS_ECJPAKE_C is not set
CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED=y
CONFIG_MBEDTLS_ECP_NIST_OPTIM=y
# CONFIG_MBEDTLS_POLY1305_C is not set
# CONFIG_MBEDTLS_CHACHA20_C is not set
# CONFIG_MBEDTLS_HKDF_C is not set
# CONFIG_MBEDTLS_THREADING_C is not set
# CONFIG_MBEDTLS_LARGE_KEY_SOFTWARE_MPI is not set
# CONFIG_MBEDTLS_SECURITY_RISKS is not set
# end of mbedTLS

#
# mDNS
#
CONFIG_MDNS_MAX_SERVICES=10
CONFIG_MDNS_TASK_PRIORITY=1
CONFIG_MDNS_TASK_STACK_SIZE=4096
# CONFIG_MDNS_TASK_AFFINITY_NO_AFFINITY is not set
CONFIG_MDNS_TASK_AFFINITY_CPU0=y
# CONFIG_MDNS_TASK_AFFINITY_CPU1 is not set
CONFIG_MDNS_TASK_AFFINITY=0x0
CONFIG_MDNS_SERVICE_ADD_TIMEOUT_MS=2000
CONFIG_MDNS_TIMER_PERIOD_MS=100
# end of mDNS

#
# ESP-MQTT Configurations
#
CONFIG_MQTT_PROTOCOL_311=y
CONFIG_MQTT_TRANSPORT_SSL=y
CONFIG_MQTT_TRANSPORT_WEBSOCKET=y
CONFIG_MQTT_TRANSPORT_WEBSOCKET_SECURE=y
# CONFIG_MQTT_MSG_ID_INCREMENTAL is not set
# CONFIG_MQTT_SKIP_PUBLISH_IF_DISCONNECTED is not set
# CONFIG_MQTT_REPORT_DELETED_MESSAGES is not set
# CONFIG_MQTT_USE_CUSTOM_CONFIG is not set
# CONFIG_MQTT_TASK_CORE_SELECTION_ENABLED is not set
# CONFIG_MQTT_CUSTOM_OUTBOX is not set
# end of ESP-MQTT Configurations

#
# Newlib
#
CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF=y
# CONFIG_NEWLIB_STDOUT_LINE_ENDING_LF is not set
# CONFIG_NEWLIB_STDOUT_LINE_ENDING_CR is not set
# CONFIG_NEWLIB_STDIN_LINE_ENDING_CRLF is not set
# CONFIG_NEWLIB_STDIN_LINE_ENDING_LF is not set
CONFIG_NEWLIB_STDIN_LINE_ENDING_CR=y
# CONFIG_NEWLIB_NANO_FORMAT is not set
# end of Newlib

#
# NVS
#
# end of NVS

#
# OpenSSL
#
# CONFIG_OPENSSL_DEBUG is not set
CONFIG_OPENSSL_ERROR_STACK=y
# CONFIG_OPENSSL_ASSERT_DO_NOTHING is not set
CONFIG_OPENSSL_ASSERT_EXIT=y
# end of OpenSSL

#
# PThreads
#
CONFIG_PTHREAD_TASK_PRIO_DEFAULT=5
CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072
CONFIG_PTHREAD_STACK_MIN=768
CONFIG_PTHREAD_DEFAULT_CORE_NO_AFFINITY=y
# CONFIG_PTHREAD_DEFAULT_CORE_0 is not set
# CONFIG_PTHREAD_DEFAULT_CORE_1 is not set
CONFIG_PTHREAD_TASK_CORE_DEFAULT=-1
CONFIG_PTHREAD_TASK_NAME_DEFAULT="pthread"
# end of PThreads

#
# SPI Flash driver
#
# CONFIG_SPI_FLASH_VERIFY_WRITE is not set
# CONFIG_SPI_FLASH_ENABLE_COUNTERS is not set
CONFIG_SPI_FLASH_ROM_DRIVER_PATCH=y
CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS=y
# CONFIG_SPI_FLASH_DANGEROUS_WRITE_FAILS is not set
# CONFIG_SPI_FLASH_DANGEROUS_WRITE_ALLOWED is not set
# CONFIG_SPI_FLASH_USE_LEGACY_IMPL is not set
# CONFIG_SPI_FLASH_SHARE_SPI1_BUS is not set
# CONFIG_SPI_FLASH_BYPASS_BLOCK_ERASE is not set
CONFIG_SPI_FLASH_YIELD_DURING_ERASE=y
CONFIG_SPI_FLASH_ERASE_YIELD_DURATION_MS=20
CONFIG_SPI_FLASH_ERASE_YIELD_TICKS=1
CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE=8192
# CONFIG_SPI_FLASH_SIZE_OVERRIDE is not set
# CONFIG_SPI_FLASH_CHECK_ERASE_TIMEOUT_DISABLED is not set

#
# Auto-detect flash chips
#
CONFIG_SPI_FLASH_SUPPORT_ISSI_CHIP=y
CONFIG_SPI_FLASH_SUPPORT_MXIC_CHIP=y
CONFIG_SPI_FLASH_SUPPORT_GD_CHIP=y
CONFIG_SPI_FLASH_SUPPORT_WINBOND_CHIP=y
# end of Auto-detect flash chips

CONFIG_SPI_FLASH_ENABLE_ENCRYPTED_READ_WRITE=y
# end of SPI Flash driver

#
# SPIFFS Configuration
#
CONFIG_SPIFFS_MAX_PARTITIONS=3

#
# SPIFFS Cache Configuration
#
CONFIG_SPIFFS_CACHE=y
CONFIG_SPIFFS_CACHE_WR=y
# CONFIG_SPIFFS_CACHE_STATS is not set
# end of SPIFFS Cache Configuration

CONFIG_SPIFFS_PAGE_CHECK=y
CONFIG_SPIFFS_GC_MAX_RUNS=10
# CONFIG_SPIFFS_GC_STATS is not set
CONFIG_SPIFFS_PAGE_SIZE=256
CONFIG_SPIFFS_OBJ_NAME_LEN=32
# CONFIG_SPIFFS_FOLLOW_SYMLINKS is not set
CONFIG_SPIFFS_USE_MAGIC=y
CONFIG_SPIFFS_USE_MAGIC_LENGTH=y
CONFIG_SPIFFS_META_LENGTH=4
CONFIG_SPIFFS_USE_MTIME=y

#
# Debug Configuration
#
# CONFIG_SPIFFS_DBG is not set
# CONFIG_SPIFFS_API_DBG is not set
# CONFIG_SPIFFS_GC_DBG is not set
# CONFIG_SPIFFS_CACHE_DBG is not set
# CONFIG_SPIFFS_CHECK_DBG is not set
# CONFIG_SPIFFS_TEST_VISUALISATION is not set
# end of Debug Configuration
# end of SPIFFS Configuration

#
# TCP Transport
#
CONFIG_WS_BUFFER_SIZE=1024
# end of TCP Transport

#
# TinyUSB
#
# end of TinyUSB

#
# Unity unit testing library
#
CONFIG_UNITY_ENABLE_FLOAT=y
CONFIG_UNITY_ENABLE_DOUBLE=y
# CONFIG_UNITY_ENABLE_COLOR is not set
CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER=y
# CONFIG_UNITY_ENABLE_FIXTURE is not set
# CONFIG_UNITY_ENABLE_BACKTRACE_ON_FAIL is not set
# end of Unity unit testing library

#
# Virtual file system
#
CONFIG_VFS_SUPPORT_IO=y
CONFIG_VFS_SUPPORT_DIR=y
CONFIG_VFS_SUPPORT_SELECT=y
CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT=y
CONFIG_VFS_SUPPORT_TERMIOS=y

#
# Host File System I/O (Semihosting)
#
CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS=1
CONFIG_VFS_SEMIHOSTFS_HOST_PATH_MAX_LEN=128
# end of Host File System I/O (Semihosting)
# end of Virtual file system

#
# Wear Levelling
#
# CONFIG_WL_SECTOR_SIZE_512 is not set
CONFIG_WL_SECTOR_SIZE_4096=y
CONFIG_WL_SECTOR_SIZE=4096
# end of Wear Levelling

#
# Wi-Fi Provisioning Manager
#
CONFIG_WIFI_PROV_SCAN_MAX_ENTRIES=16
CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT=30
# end of Wi-Fi Provisioning Manager

#
# Supplicant
#
CONFIG_WPA_MBEDTLS_CRYPTO=y
# CONFIG_WPA_WAPI_PSK is not set
# CONFIG_WPA_DEBUG_PRINT is not set
# CONFIG_WPA_TESTING_OPTIONS is not set
# CONFIG_WPA_WPS_WARS is not set
# CONFIG_WPA_11KV_SUPPORT is not set
# end of Supplicant

#
# lv_examples configuration
#
CONFIG_LV_EX_PRINTF=y
# CONFIG_LV_USE_DEMO_WIDGETS is not set
# CONFIG_LV_USE_DEMO_KEYPAD_AND_ENCODER is not set
CONFIG_LV_USE_DEMO_BENCHMARK=y
# CONFIG_LV_USE_DEMO_STRESS is not set
# end of lv_examples configuration

#
# LVGL configuration
#
# CONFIG_LV_ATTRIBUTE_FAST_MEM_USE_IRAM is not set
# CONFIG_LV_CONF_MINIMAL is not set
CONFIG_LV_CONF_SKIP=y
CONFIG_LV_HOR_RES_MAX=800
CONFIG_LV_VER_RES_MAX=480
# CONFIG_LV_COLOR_DEPTH_32 is not set
CONFIG_LV_COLOR_DEPTH_16=y
# CONFIG_LV_COLOR_DEPTH_8 is not set
# CONFIG_LV_COLOR_DEPTH_1 is not set
CONFIG_LV_COLOR_DEPTH=16
# CONFIG_LV_COLOR_16_SWAP is not set
CONFIG_LV_ANTIALIAS=y
CONFIG_LV_DISP_DEF_REFR_PERIOD=30
CONFIG_LV_DPI=130
CONFIG_LV_DISP_SMALL_LIMIT=30
CONFIG_LV_DISP_MEDIUM_LIMIT=50
CONFIG_LV_DISP_LARGE_LIMIT=70

#
# Memory manager settings
#
# CONFIG_LV_MEM_CUSTOM is not set
CONFIG_LV_MEM_SIZE_KILOBYTES=32
# CONFIG_LV_MEMCPY_MEMSET_STD is not set
# end of Memory manager settings

#
# Indev device settings
#
CONFIG_LV_INDEV_DEF_READ_PERIOD=30
CONFIG_LV_INDEV_DEF_DRAG_LIMIT=10
CONFIG_LV_INDEV_DEF_DRAG_THROW=10
CONFIG_LV_INDEV_DEF_LONG_PRESS_TIME=400
CONFIG_LV_INDEV_DEF_LONG_PRESS_REP_TIME=100
CONFIG_LV_INDEV_DEF_GESTURE_LIMIT=50
CONFIG_LV_INDEV_DEF_GESTURE_MIN_VELOCITY=3
# end of Indev device settings

#
# Feature usage
#
CONFIG_LV_USE_ANIMATION=y
CONFIG_LV_USE_SHADOW=y
CONFIG_LV_SHADOW_CACHE_SIZE=0
CONFIG_LV_USE_OUTLINE=y
CONFIG_LV_USE_PATTERN=y
CONFIG_LV_USE_VALUE_STR=y
CONFIG_LV_USE_BLEND_MODES=y
CONFIG_LV_USE_OPA_SCALE=y
CONFIG_LV_USE_IMG_TRANSFORM=y
CONFIG_LV_USE_GROUP=y
CONFIG_LV_USE_GPU=y
# CONFIG_LV_USE_GPU_STM32_DMA2D is not set
# CONFIG_LV_USE_GPU_NXP_PXP is not set
# CONFIG_LV_USE_GPU_NXP_VG_LITE is not set
CONFIG_LV_USE_FILESYSTEM=y
# CONFIG_LV_USE_USER_DATA is not set
# CONFIG_LV_USE_PERF_MONITOR is not set
CONFIG_LV_USE_API_EXTENSION_V6=y
CONFIG_LV_USE_API_EXTENSION_V7=y
# end of Feature usage

#
# Image decoder and cache
#
CONFIG_LV_IMG_CF_INDEXED=y
CONFIG_LV_IMG_CF_ALPHA=y
CONFIG_LV_IMG_CACHE_DEF_SIZE=1
# end of Image decoder and cache

#
# Compiler Settings
#
# CONFIG_LV_BIG_ENDIAN_SYSTEM is not set
# end of Compiler Settings

#
# HAL Settings
#
# CONFIG_LV_TICK_CUSTOM is not set
# end of HAL Settings

#
# Log Settings
#
CONFIG_LV_USE_LOG=y
# CONFIG_LV_LOG_LEVEL_TRACE is not set
CONFIG_LV_LOG_LEVEL_INFO=y
# CONFIG_LV_LOG_LEVEL_WARN is not set
# CONFIG_LV_LOG_LEVEL_ERROR is not set
# CONFIG_LV_LOG_LEVEL_NONE is not set
CONFIG_LV_LOG_LEVEL=1
CONFIG_LV_LOG_PRINTF=y
# end of Log Settings

#
# Debug Settings
#
# CONFIG_LV_USE_DEBUG is not set
CONFIG_LV_USE_ASSERT_NULL=y
CONFIG_LV_USE_ASSERT_MEM=y
# CONFIG_LV_USE_ASSERT_MEM_INTEGRITY is not set
# CONFIG_LV_USE_ASSERT_STR is not set
# CONFIG_LV_USE_ASSERT_OBJ is not set
# CONFIG_LV_USE_ASSERT_STYLE is not set
# end of Debug Settings

#
# Font usage
#
# CONFIG_LV_FONT_FMT_TXT_LARGE is not set
# CONFIG_LV_USE_FONT_SUBPX is not set

#
# Enable built-in fonts
#
# CONFIG_LV_FONT_MONTSERRAT_8 is not set
# CONFIG_LV_FONT_MONTSERRAT_10 is not set
# CONFIG_LV_FONT_MONTSERRAT_12 is not set
CONFIG_LV_FONT_MONTSERRAT_14=y
CONFIG_LV_FONT_MONTSERRAT_16=y
# CONFIG_LV_FONT_MONTSERRAT_18 is not set
# CONFIG_LV_FONT_MONTSERRAT_20 is not set
# CONFIG_LV_FONT_MONTSERRAT_22 is not set
# CONFIG_LV_FONT_MONTSERRAT_24 is not set
# CONFIG_LV_FONT_MONTSERRAT_26 is not set
# CONFIG_LV_FONT_MONTSERRAT_28 is not set
# CONFIG_LV_FONT_MONTSERRAT_30 is not set
# CONFIG_LV_FONT_MONTSERRAT_32 is not set
# CONFIG_LV_FONT_MONTSERRAT_34 is not set
# CONFIG_LV_FONT_MONTSERRAT_36 is not set
# CONFIG_LV_FONT_MONTSERRAT_38 is not set
# CONFIG_LV_FONT_MONTSERRAT_40 is not set
# CONFIG_LV_FONT_MONTSERRAT_42 is not set
# CONFIG_LV_FONT_MONTSERRAT_44 is not set
# CONFIG_LV_FONT_MONTSERRAT_46 is not set
# CONFIG_LV_FONT_MONTSERRAT_48 is not set
# CONFIG_LV_FONT_UNSCII_8 is not set
# CONFIG_LV_FONT_UNSCII_16 is not set
# CONFIG_LV_FONT_MONTSERRAT12SUBPX is not set
# CONFIG_LV_FONT_MONTSERRAT28COMPRESSED is not set
# CONFIG_LV_FONT_DEJAVU_16_PERSIAN_HEBREW is not set
# CONFIG_LV_FONT_SIMSUN_16_CJK is not set
# end of Enable built-in fonts

# CONFIG_LV_FONT_DEFAULT_SMALL_MONTSERRAT_8 is not set
# CONFIG_LV_FONT_DEFAULT_SMALL_MONTSERRAT_10 is not set
# CONFIG_LV_FONT_DEFAULT_SMALL_MONTSERRAT_12 is not set
# CONFIG_LV_FONT_DEFAULT_SMALL_MONTSERRAT_14 is not set
CONFIG_LV_FONT_DEFAULT_SMALL_MONTSERRAT_16=y
# CONFIG_LV_FONT_DEFAULT_SMALL_MONTSERRAT_18 is not set
# CONFIG_LV_FONT_DEFAULT_SMALL_MONTSERRAT_20 is not set
# CONFIG_LV_FONT_DEFAULT_SMALL_MONTSERRAT_22 is not set
# CONFIG_LV_FONT_DEFAULT_SMALL_MONTSERRAT_24 is not set
# CONFIG_LV_FONT_DEFAULT_SMALL_MONTSERRAT_26 is not set
# CONFIG_LV_FONT_DEFAULT_SMALL_MONTSERRAT_28 is not set
# CONFIG_LV_FONT_DEFAULT_SMALL_MONTSERRAT_30 is not set
# CONFIG_LV_FONT_DEFAULT_SMALL_MONTSERRAT_32 is not set
# CONFIG_LV_FONT_DEFAULT_SMALL_MONTSERRAT_34 is not set
# CONFIG_LV_FONT_DEFAULT_SMALL_MONTSERRAT_36 is not set
# CONFIG_LV_FONT_DEFAULT_SMALL_MONTSERRAT_38 is not set
# CONFIG_LV_FONT_DEFAULT_SMALL_MONTSERRAT_40 is not set
# CONFIG_LV_FONT_DEFAULT_SMALL_MONTSERRAT_42 is not set
# CONFIG_LV_FONT_DEFAULT_SMALL_MONTSERRAT_44 is not set
# CONFIG_LV_FONT_DEFAULT_SMALL_MONTSERRAT_46 is not set
# CONFIG_LV_FONT_DEFAULT_SMALL_MONTSERRAT_48 is not set
# CONFIG_LV_FONT_DEFAULT_SMALL_UNSCII_8 is not set
# CONFIG_LV_FONT_DEFAULT_SMALL_UNSCII_16 is not set
# CONFIG_LV_FONT_DEFAULT_SMALL_MONTSERRAT12SUBPX is not set
# CONFIG_LV_FONT_DEFAULT_SMALL_MONTSERRAT28COMPRESSED is not set
# CONFIG_LV_FONT_DEFAULT_SMALL_DEJAVU_16_PERSIAN_HEBREW is not set
# CONFIG_LV_FONT_DEFAULT_SMALL_SIMSUN_16_CJK is not set
# CONFIG_LV_FONT_DEFAULT_NORMAL_MONTSERRAT_8 is not set
# CONFIG_LV_FONT_DEFAULT_NORMAL_MONTSERRAT_10 is not set
# CONFIG_LV_FONT_DEFAULT_NORMAL_MONTSERRAT_12 is not set
# CONFIG_LV_FONT_DEFAULT_NORMAL_MONTSERRAT_14 is not set
CONFIG_LV_FONT_DEFAULT_NORMAL_MONTSERRAT_16=y
# CONFIG_LV_FONT_DEFAULT_NORMAL_MONTSERRAT_18 is not set
# CONFIG_LV_FONT_DEFAULT_NORMAL_MONTSERRAT_20 is not set
# CONFIG_LV_FONT_DEFAULT_NORMAL_MONTSERRAT_22 is not set
# CONFIG_LV_FONT_DEFAULT_NORMAL_MONTSERRAT_24 is not set
# CONFIG_LV_FONT_DEFAULT_NORMAL_MONTSERRAT_26 is not set
# CONFIG_LV_FONT_DEFAULT_NORMAL_MONTSERRAT_28 is not set
# CONFIG_LV_FONT_DEFAULT_NORMAL_MONTSERRAT_30 is not set
# CONFIG_LV_FONT_DEFAULT_NORMAL_MONTSERRAT_32 is not set
# CONFIG_LV_FONT_DEFAULT_NORMAL_MONTSERRAT_34 is not set
# CONFIG_LV_FONT_DEFAULT_NORMAL_MONTSERRAT_36 is not set
# CONFIG_LV_FONT_DEFAULT_NORMAL_MONTSERRAT_38 is not set
# CONFIG_LV_FONT_DEFAULT_NORMAL_MONTSERRAT_40 is not set
# CONFIG_LV_FONT_DEFAULT_NORMAL_MONTSERRAT_42 is not set
# CONFIG_LV_FONT_DEFAULT_NORMAL_MONTSERRAT_44 is not set
# CONFIG_LV_FONT_DEFAULT_NORMAL_MONTSERRAT_46 is not set
# CONFIG_LV_FONT_DEFAULT_NORMAL_MONTSERRAT_48 is not set
# CONFIG_LV_FONT_DEFAULT_NORMAL_UNSCII_8 is not set
# CONFIG_LV_FONT_DEFAULT_NORMAL_UNSCII_16 is not set
# CONFIG_LV_FONT_DEFAULT_NORMAL_MONTSERRAT12SUBPX is not set
# CONFIG_LV_FONT_DEFAULT_NORMAL_MONTSERRAT28COMPRESSED is not set
# CONFIG_LV_FONT_DEFAULT_NORMAL_DEJAVU_16_PERSIAN_HEBREW is not set
# CONFIG_LV_FONT_DEFAULT_NORMAL_SIMSUN_16_CJK is not set
# CONFIG_LV_FONT_DEFAULT_SUBTITLE_MONTSERRAT_8 is not set
# CONFIG_LV_FONT_DEFAULT_SUBTITLE_MONTSERRAT_10 is not set
# CONFIG_LV_FONT_DEFAULT_SUBTITLE_MONTSERRAT_12 is not set
# CONFIG_LV_FONT_DEFAULT_SUBTITLE_MONTSERRAT_14 is not set
CONFIG_LV_FONT_DEFAULT_SUBTITLE_MONTSERRAT_16=y
# CONFIG_LV_FONT_DEFAULT_SUBTITLE_MONTSERRAT_18 is not set
# CONFIG_LV_FONT_DEFAULT_SUBTITLE_MONTSERRAT_20 is not set
# CONFIG_LV_FONT_DEFAULT_SUBTITLE_MONTSERRAT_22 is not set
# CONFIG_LV_FONT_DEFAULT_SUBTITLE_MONTSERRAT_24 is not set
# CONFIG_LV_FONT_DEFAULT_SUBTITLE_MONTSERRAT_26 is not set
# CONFIG_LV_FONT_DEFAULT_SUBTITLE_MONTSERRAT_28 is not set
# CONFIG_LV_FONT_DEFAULT_SUBTITLE_MONTSERRAT_30 is not set
# CONFIG_LV_FONT_DEFAULT_SUBTITLE_MONTSERRAT_32 is not set
# CONFIG_LV_FONT_DEFAULT_SUBTITLE_MONTSERRAT_34 is not set
# CONFIG_LV_FONT_DEFAULT_SUBTITLE_MONTSERRAT_36 is not set
# CONFIG_LV_FONT_DEFAULT_SUBTITLE_MONTSERRAT_38 is not set
# CONFIG_LV_FONT_DEFAULT_SUBTITLE_MONTSERRAT_40 is not set
# CONFIG_LV_FONT_DEFAULT_SUBTITLE_MONTSERRAT_42 is not set
# CONFIG_LV_FONT_DEFAULT_SUBTITLE_MONTSERRAT_44 is not set
# CONFIG_LV_FONT_DEFAULT_SUBTITLE_MONTSERRAT_46 is not set
# CONFIG_LV_FONT_DEFAULT_SUBTITLE_MONTSERRAT_48 is not set
# CONFIG_LV_FONT_DEFAULT_SUBTITLE_UNSCII_8 is not set
# CONFIG_LV_FONT_DEFAULT_SUBTITLE_UNSCII_16 is not set
# CONFIG_LV_FONT_DEFAULT_SUBTITLE_MONTSERRAT12SUBPX is not set
# CONFIG_LV_FONT_DEFAULT_SUBTITLE_MONTSERRAT28COMPRESSED is not set
# CONFIG_LV_FONT_DEFAULT_SUBTITLE_DEJAVU_16_PERSIAN_HEBREW is not set
# CONFIG_LV_FONT_DEFAULT_SUBTITLE_SIMSUN_16_CJK is not set
# CONFIG_LV_FONT_DEFAULT_TITLE_MONTSERRAT_8 is not set
# CONFIG_LV_FONT_DEFAULT_TITLE_MONTSERRAT_12 is not set
# CONFIG_LV_FONT_DEFAULT_TITLE_MONTSERRAT_14 is not set
CONFIG_LV_FONT_DEFAULT_TITLE_MONTSERRAT_16=y
# CONFIG_LV_FONT_DEFAULT_TITLE_MONTSERRAT_18 is not set
# CONFIG_LV_FONT_DEFAULT_TITLE_MONTSERRAT_20 is not set
# CONFIG_LV_FONT_DEFAULT_TITLE_MONTSERRAT_22 is not set
# CONFIG_LV_FONT_DEFAULT_TITLE_MONTSERRAT_24 is not set
# CONFIG_LV_FONT_DEFAULT_TITLE_MONTSERRAT_26 is not set
# CONFIG_LV_FONT_DEFAULT_TITLE_MONTSERRAT_28 is not set
# CONFIG_LV_FONT_DEFAULT_TITLE_MONTSERRAT_30 is not set
# CONFIG_LV_FONT_DEFAULT_TITLE_MONTSERRAT_32 is not set
# CONFIG_LV_FONT_DEFAULT_TITLE_MONTSERRAT_34 is not set
# CONFIG_LV_FONT_DEFAULT_TITLE_MONTSERRAT_36 is not set
# CONFIG_LV_FONT_DEFAULT_TITLE_MONTSERRAT_38 is not set
# CONFIG_LV_FONT_DEFAULT_TITLE_MONTSERRAT_40 is not set
# CONFIG_LV_FONT_DEFAULT_TITLE_MONTSERRAT_42 is not set
# CONFIG_LV_FONT_DEFAULT_TITLE_MONTSERRAT_44 is not set
# CONFIG_LV_FONT_DEFAULT_TITLE_MONTSERRAT_46 is not set
# CONFIG_LV_FONT_DEFAULT_TITLE_MONTSERRAT_48 is not set
# CONFIG_LV_FONT_DEFAULT_TITLE_UNSCII_8 is not set
# CONFIG_LV_FONT_DEFAULT_TITLE_UNSCII_16 is not set
# CONFIG_LV_FONT_DEFAULT_TITLE_MONTSERRAT12SUBPX is not set
# CONFIG_LV_FONT_DEFAULT_TITLE_MONTSERRAT28COMPRESSED is not set
# CONFIG_LV_FONT_DEFAULT_TITLE_DEJAVU_16_PERSIAN_HEBREW is not set
# CONFIG_LV_FONT_DEFAULT_TITLE_SIMSUN_16_CJK is not set
# end of Font usage

#
# Theme usage
#

#
# Enable theme usage, always enable at least one theme
#
# CONFIG_LV_THEME_EMPTY is not set
# CONFIG_LV_THEME_TEMPLATE is not set
CONFIG_LV_THEME_MATERIAL=y
# CONFIG_LV_THEME_MONO is not set
# end of Enable theme usage, always enable at least one theme

# CONFIG_LV_THEME_DEFAULT_INIT_EMPTY is not set
# CONFIG_LV_THEME_DEFAULT_INIT_TEMPLATE is not set
CONFIG_LV_THEME_DEFAULT_INIT_MATERIAL=y
# CONFIG_LV_THEME_DEFAULT_INIT_MONO is not set
CONFIG_LV_THEME_DEFAULT_COLOR_PRIMARY=0xFF0000
CONFIG_LV_THEME_DEFAULT_COLOR_SECONDARY=0x0000FF
CONFIG_LV_THEME_DEFAULT_FLAG_LIGHT=y
# CONFIG_LV_THEME_DEFAULT_FLAG_DARK is not set
# end of Theme usage

#
# Text Settings
#
CONFIG_LV_TXT_ENC_UTF8=y
# CONFIG_LV_TXT_ENC_ASCII is not set
CONFIG_LV_TXT_BREAK_CHARS=" ,.;:-_"
CONFIG_LV_TXT_LINE_BREAK_LONG_LEN=0
CONFIG_LV_TXT_COLOR_CMD="#"
# CONFIG_LV_USE_BIDI is not set
# CONFIG_LV_USE_ARABIC_PERSIAN_CHARS is not set
# CONFIG_LV_SPRINTF_CUSTOM is not set
# CONFIG_LV_SPRINTF_DISABLE_FLOAT is not set
# end of Text Settings

#
# Widgets
#
CONFIG_LV_USE_OBJ_REALIGN=y
# CONFIG_LV_USE_EXT_CLICK_AREA_OFF is not set
CONFIG_LV_USE_EXT_CLICK_AREA_TINY=y
# CONFIG_LV_USE_EXT_CLICK_AREA_FULL is not set
CONFIG_LV_USE_ARC=y
CONFIG_LV_USE_BAR=y
CONFIG_LV_USE_BTN=y
CONFIG_LV_USE_BTNMATRIX=y
CONFIG_LV_USE_CALENDAR=y
# CONFIG_LV_CALENDAR_WEEK_STARTS_MONDAY is not set
CONFIG_LV_USE_CANVAS=y
CONFIG_LV_USE_CHECKBOX=y
CONFIG_LV_USE_CHART=y
CONFIG_LV_CHART_AXIS_TICK_MAX_LEN=256
CONFIG_LV_USE_CONT=y
CONFIG_LV_USE_CPICKER=y
CONFIG_LV_USE_DROPDOWN=y
CONFIG_LV_DROPDOWN_DEF_ANIM_TIME=200
CONFIG_LV_USE_GAUGE=y
CONFIG_LV_USE_IMG=y
CONFIG_LV_USE_IMGBTN=y
# CONFIG_LV_IMGBTN_TILED is not set
CONFIG_LV_USE_KEYBOARD=y
CONFIG_LV_USE_LABEL=y
CONFIG_LV_LABEL_DEF_SCROLL_SPEED=25
CONFIG_LV_LABEL_WAIT_CHAR_COUNT=3
# CONFIG_LV_LABEL_TEXT_SEL is not set
# CONFIG_LV_LABEL_LONG_TXT_HINT is not set
CONFIG_LV_USE_LED=y
CONFIG_LV_LED_BRIGHT_MIN=120
CONFIG_LV_LED_BRIGHT_MAX=255
CONFIG_LV_USE_LINE=y
CONFIG_LV_USE_LIST=y
CONFIG_LV_LIST_DEF_ANIM_TIME=100
CONFIG_LV_USE_LINEMETER=y
CONFIG_LV_LINEMETER_PRECISE_NO_EXTRA_PRECISION=y
# CONFIG_LV_LINEMETER_PRECISE_SOME_EXTRA_PRECISION is not set
# CONFIG_LV_LINEMETER_PRECISE_BEST_PRECISION is not set
CONFIG_LV_USE_OBJMASK=y
CONFIG_LV_USE_MSGBOX=y
CONFIG_LV_USE_PAGE=y
CONFIG_LV_PAGE_DEF_ANIM_TIME=100
CONFIG_LV_USE_SPINNER=y
CONFIG_LV_SPINNER_DEF_ARC_LENGTH=60
CONFIG_LV_SPINNER_DEF_SPIN_TIME=1000
CONFIG_LV_SPINNER_TYPE_SPINNING_ARC=y
# CONFIG_LV_SPINNER_TYPE_FILLSPIN_ARC is not set
# CONFIG_LV_SPINNER_TYPE_CONSTANT_ARC is not set
CONFIG_LV_USE_ROLLER=y
CONFIG_LV_ROLLER_DEF_ANIM_TIME=200
CONFIG_LV_ROLLER_INF_PAGES=7
CONFIG_LV_USE_SLIDER=y
CONFIG_LV_USE_SPINBOX=y
CONFIG_LV_USE_SWITCH=y
CONFIG_LV_USE_TEXTAREA=y
CONFIG_LV_TEXTAREA_DEF_CURSOR_BLINK_TIME=400
CONFIG_LV_TEXTAREA_DEF_PWN_SHOW_TIME=1500
CONFIG_LV_USE_TABLE=y
CONFIG_LV_TABLE_COL_MAX=12
CONFIG_LV_TABLE_CELL_STYLE_CNT=4
CONFIG_LV_USE_TABVIEW=y
CONFIG_LV_TABVIEW_DEF_ANIM_TIME=300
CONFIG_LV_USE_TILEVIEW=y
CONFIG_LV_TILEVIEW_DEF_ANIM_TIME=300
CONFIG_LV_USE_WIN=y
# end of Widgets
# end of LVGL configuration

#
# LVGL TFT Display controller
#
CONFIG_LV_PREDEFINED_DISPLAY_NONE=y
# CONFIG_LV_PREDEFINED_DISPLAY_WROVER4 is not set
# CONFIG_LV_PREDEFINED_DISPLAY_M5STACK is not set
# CONFIG_LV_PREDEFINED_DISPLAY_M5STICK is not set
# CONFIG_LV_PREDEFINED_DISPLAY_M5STICKC is not set
# CONFIG_LV_PREDEFINED_DISPLAY_ERTFT0356 is not set
# CONFIG_LV_PREDEFINED_DISPLAY_ADA_FEATHERWING is not set
# CONFIG_LV_PREDEFINED_DISPLAY_RPI_MPI3501 is not set
# CONFIG_LV_PREDEFINED_DISPLAY_WEMOS_LOLIN is not set
# CONFIG_LV_PREDEFINED_DISPLAY_ATAG is not set
# CONFIG_LV_PREDEFINED_DISPLAY_RPI_RA8875 is not set
# CONFIG_LV_PREDEFINED_DISPLAY_TTGO is not set
# CONFIG_LV_PREDEFINED_DISPLAY_TTGO_CAMERA_PLUS is not set
# CONFIG_LV_PREDEFINED_DISPLAY_WT32_SC01 is not set
CONFIG_LV_TFT_DISPLAY_CONTROLLER_RA8875=y
CONFIG_LV_TFT_DISPLAY_PROTOCOL_SPI=y
# CONFIG_DISPLAY_ORIENTATION_PORTRAIT is not set
# CONFIG_DISPLAY_ORIENTATION_PORTRAIT_INVERTED is not set
CONFIG_DISPLAY_ORIENTATION_LANDSCAPE=y
# CONFIG_DISPLAY_ORIENTATION_LANDSCAPE_INVERTED is not set
CONFIG_LV_DISPLAY_ORIENTATION=2
# CONFIG_LV_PREDEFINED_PINS_NONE is not set
CONFIG_LV_PREDEFINED_PINS_38V4=y
# CONFIG_LV_PREDEFINED_PINS_30 is not set
# CONFIG_LV_PREDEFINED_PINS_38V1 is not set
# CONFIG_LV_PREDEFINED_PINS_TKOALA is not set
# CONFIG_LV_TFT_DISPLAY_USER_CONTROLLER_ILI9341 is not set
# CONFIG_LV_TFT_DISPLAY_USER_CONTROLLER_ILI9481 is not set
# CONFIG_LV_TFT_DISPLAY_USER_CONTROLLER_ILI9486 is not set
# CONFIG_LV_TFT_DISPLAY_USER_CONTROLLER_ILI9488 is not set
# CONFIG_LV_TFT_DISPLAY_USER_CONTROLLER_ST7789 is not set
# CONFIG_LV_TFT_DISPLAY_USER_CONTROLLER_ST7796S is not set
# CONFIG_LV_TFT_DISPLAY_USER_CONTROLLER_GC9A01 is not set
# CONFIG_LV_TFT_DISPLAY_USER_CONTROLLER_ST7735S is not set
# CONFIG_LV_TFT_DISPLAY_USER_CONTROLLER_HX8357 is not set
# CONFIG_LV_TFT_DISPLAY_USER_CONTROLLER_SH1107 is not set
# CONFIG_LV_TFT_DISPLAY_USER_CONTROLLER_SSD1306 is not set
# CONFIG_LV_TFT_DISPLAY_USER_CONTROLLER_FT81X is not set
# CONFIG_LV_TFT_DISPLAY_USER_CONTROLLER_IL3820 is not set
# CONFIG_LV_TFT_DISPLAY_USER_CONTROLLER_JD79653A is not set
# CONFIG_LV_TFT_DISPLAY_USER_CONTROLLER_UC8151D is not set
CONFIG_LV_TFT_DISPLAY_USER_CONTROLLER_RA8875=y
# CONFIG_CUSTOM_DISPLAY_BUFFER_SIZE is not set
# CONFIG_LV_TFT_DISPLAY_SPI_HSPI is not set
CONFIG_LV_TFT_DISPLAY_SPI_VSPI=y
# CONFIG_LV_TFT_DISPLAY_SPI_TRANS_MODE_SIO is not set
# CONFIG_LV_TFT_DISPLAY_SPI_TRANS_MODE_DIO is not set
CONFIG_LV_TFT_DISPLAY_SPI_TRANS_MODE_QIO=y
CONFIG_LV_TFT_DISPLAY_SPI_HALF_DUPLEX=y
# CONFIG_LV_TFT_USE_CUSTOM_SPI_CLK_DIVIDER is not set
CONFIG_LV_TFT_CUSTOM_SPI_CLK_DIVIDER=2
# CONFIG_LV_INVERT_DISPLAY is not set

#
# Display RA8875 Configuration
#
CONFIG_LV_DISP_RA8875_PLLDIVM=0
CONFIG_LV_DISP_RA8875_PLLDIVN=7
CONFIG_LV_DISP_RA8875_PLLDIVK=3
CONFIG_LV_DISP_RA8875_PCLK_MULTIPLIER=0
# CONFIG_LV_DISP_RA8875_PCLK_INVERT is not set
# CONFIG_LV_DISP_RA8875_DE_POLARITY is not set
CONFIG_LV_DISP_RA8875_HORI_NON_DISP_PERIOD=12
CONFIG_LV_DISP_RA8875_HSYNC_START=8
CONFIG_LV_DISP_RA8875_HSYNC_PW=8
# CONFIG_LV_DISP_RA8875_HSYNC_POLARITY is not set
CONFIG_LV_DISP_RA8875_VERT_NON_DISP_PERIOD=1
CONFIG_LV_DISP_RA8875_VSYNC_START=1
CONFIG_LV_DISP_RA8875_VSYNC_PW=1
# CONFIG_LV_DISP_RA8875_VSYNC_POLARITY is not set
# end of Display RA8875 Configuration

#
# Display Pin Assignments
#
CONFIG_LV_DISP_SPI_MOSI=23
CONFIG_LV_DISPLAY_USE_SPI_MISO=y
CONFIG_LV_DISP_SPI_MISO=19
CONFIG_LV_DISP_SPI_INPUT_DELAY_NS=0
CONFIG_LV_DISP_SPI_IO2=-1
CONFIG_LV_DISP_SPI_IO3=-1
CONFIG_LV_DISP_SPI_CLK=18
CONFIG_LV_DISPLAY_USE_SPI_CS=y
CONFIG_LV_DISP_SPI_CS=5
# CONFIG_LV_DISPLAY_USE_DC is not set
CONFIG_LV_DISP_PIN_RST=25
CONFIG_LV_DISP_PIN_BUSY=35
CONFIG_LV_ENABLE_BACKLIGHT_CONTROL=y
CONFIG_LV_BACKLIGHT_ACTIVE_LVL=y
CONFIG_LV_DISP_PIN_BCKL=32
CONFIG_LV_DISP_PIN_SDA=5
CONFIG_LV_DISP_PIN_SCL=4
# end of Display Pin Assignments
# end of LVGL TFT Display controller

#
# LVGL Touch controller
#
CONFIG_LV_TOUCH_CONTROLLER=0
CONFIG_LV_TOUCH_CONTROLLER_NONE=y
# CONFIG_LV_TOUCH_CONTROLLER_XPT2046 is not set
# CONFIG_LV_TOUCH_CONTROLLER_FT6X06 is not set
# CONFIG_LV_TOUCH_CONTROLLER_STMPE610 is not set
# CONFIG_LV_TOUCH_CONTROLLER_ADCRAW is not set
# CONFIG_LV_TOUCH_CONTROLLER_FT81X is not set
# CONFIG_LV_TOUCH_CONTROLLER_RA8875 is not set
# end of LVGL Touch controller
# end of Component config

#
# Compatibility options
#
# CONFIG_LEGACY_INCLUDE_COMMON_HEADERS is not set
# end of Compatibility options

# Deprecated options for backward compatibility
CONFIG_TOOLPREFIX="xtensa-esp32-elf-"
# CONFIG_LOG_BOOTLOADER_LEVEL_NONE is not set
# CONFIG_LOG_BOOTLOADER_LEVEL_ERROR is not set
# CONFIG_LOG_BOOTLOADER_LEVEL_WARN is not set
CONFIG_LOG_BOOTLOADER_LEVEL_INFO=y
# CONFIG_LOG_BOOTLOADER_LEVEL_DEBUG is not set
# CONFIG_LOG_BOOTLOADER_LEVEL_VERBOSE is not set
CONFIG_LOG_BOOTLOADER_LEVEL=3
# CONFIG_APP_ROLLBACK_ENABLE is not set
# CONFIG_FLASH_ENCRYPTION_ENABLED is not set
CONFIG_FLASHMODE_QIO=y
# CONFIG_FLASHMODE_QOUT is not set
# CONFIG_FLASHMODE_DIO is not set
# CONFIG_FLASHMODE_DOUT is not set
# CONFIG_MONITOR_BAUD_9600B is not set
# CONFIG_MONITOR_BAUD_57600B is not set
CONFIG_MONITOR_BAUD_115200B=y
# CONFIG_MONITOR_BAUD_230400B is not set
# CONFIG_MONITOR_BAUD_921600B is not set
# CONFIG_MONITOR_BAUD_2MB is not set
# CONFIG_MONITOR_BAUD_OTHER is not set
CONFIG_MONITOR_BAUD_OTHER_VAL=115200
CONFIG_MONITOR_BAUD=115200
CONFIG_COMPILER_OPTIMIZATION_LEVEL_DEBUG=y
# CONFIG_COMPILER_OPTIMIZATION_LEVEL_RELEASE is not set
CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED=y
# CONFIG_OPTIMIZATION_ASSERTIONS_SILENT is not set
# CONFIG_OPTIMIZATION_ASSERTIONS_DISABLED is not set
# CONFIG_CXX_EXCEPTIONS is not set
CONFIG_STACK_CHECK_NONE=y
# CONFIG_STACK_CHECK_NORM is not set
# CONFIG_STACK_CHECK_STRONG is not set
# CONFIG_STACK_CHECK_ALL is not set
# CONFIG_WARN_WRITE_STRINGS is not set
# CONFIG_DISABLE_GCC8_WARNINGS is not set
# CONFIG_ESP32_APPTRACE_DEST_TRAX is not set
CONFIG_ESP32_APPTRACE_DEST_NONE=y
CONFIG_ESP32_APPTRACE_LOCK_ENABLE=y
CONFIG_BTDM_CONTROLLER_BLE_MAX_CONN_EFF=0
CONFIG_BTDM_CONTROLLER_BR_EDR_MAX_ACL_CONN_EFF=0
CONFIG_BTDM_CONTROLLER_BR_EDR_MAX_SYNC_CONN_EFF=0
CONFIG_BTDM_CONTROLLER_PINNED_TO_CORE=0
CONFIG_ADC2_DISABLE_DAC=y
# CONFIG_SPIRAM_SUPPORT is not set
CONFIG_TRACEMEM_RESERVE_DRAM=0x0
# CONFIG_TWO_UNIVERSAL_MAC_ADDRESS is not set
CONFIG_FOUR_UNIVERSAL_MAC_ADDRESS=y
CONFIG_NUMBER_OF_UNIVERSAL_MAC_ADDRESS=4
# CONFIG_ULP_COPROC_ENABLED is not set
CONFIG_ULP_COPROC_RESERVE_MEM=0
CONFIG_BROWNOUT_DET=y
CONFIG_BROWNOUT_DET_LVL_SEL_0=y
# CONFIG_BROWNOUT_DET_LVL_SEL_1 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_2 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_3 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_4 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_5 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_6 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_7 is not set
CONFIG_BROWNOUT_DET_LVL=0
CONFIG_REDUCE_PHY_TX_POWER=y
CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_RC=y
# CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_CRYSTAL is not set
# CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_OSC is not set
# CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_8MD256 is not set
# CONFIG_DISABLE_BASIC_ROM_CONSOLE is not set
# CONFIG_NO_BLOBS is not set
# CONFIG_COMPATIBLE_PRE_V2_1_BOOTLOADERS is not set
CONFIG_SYSTEM_EVENT_QUEUE_SIZE=32
CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE=2304
CONFIG_MAIN_TASK_STACK_SIZE=3584
CONFIG_IPC_TASK_STACK_SIZE=1024
CONFIG_CONSOLE_UART_DEFAULT=y
# CONFIG_CONSOLE_UART_CUSTOM is not set
# CONFIG_ESP_CONSOLE_UART_NONE is not set
CONFIG_CONSOLE_UART=y
CONFIG_CONSOLE_UART_NUM=0
CONFIG_CONSOLE_UART_BAUDRATE=115200
CONFIG_INT_WDT=y
CONFIG_INT_WDT_TIMEOUT_MS=300
CONFIG_INT_WDT_CHECK_CPU1=y
CONFIG_TASK_WDT=y
# CONFIG_TASK_WDT_PANIC is not set
CONFIG_TASK_WDT_TIMEOUT_S=5
CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU0=y
CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU1=y
# CONFIG_EVENT_LOOP_PROFILING is not set
CONFIG_POST_EVENTS_FROM_ISR=y
CONFIG_POST_EVENTS_FROM_IRAM_ISR=y
# CONFIG_ESP32S2_PANIC_PRINT_HALT is not set
CONFIG_ESP32S2_PANIC_PRINT_REBOOT=y
# CONFIG_ESP32S2_PANIC_SILENT_REBOOT is not set
# CONFIG_ESP32S2_PANIC_GDBSTUB is not set
CONFIG_TIMER_TASK_STACK_SIZE=3584
# CONFIG_ESP32_ENABLE_COREDUMP_TO_FLASH is not set
# CONFIG_ESP32_ENABLE_COREDUMP_TO_UART is not set
CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE=y
CONFIG_MB_MASTER_TIMEOUT_MS_RESPOND=150
CONFIG_MB_MASTER_DELAY_MS_CONVERT=200
CONFIG_MB_QUEUE_LENGTH=20
CONFIG_MB_SERIAL_TASK_STACK_SIZE=4096
CONFIG_MB_SERIAL_BUF_SIZE=256
CONFIG_MB_SERIAL_TASK_PRIO=10
CONFIG_MB_CONTROLLER_SLAVE_ID_SUPPORT=y
CONFIG_MB_CONTROLLER_SLAVE_ID=0x00112233
CONFIG_MB_CONTROLLER_NOTIFY_TIMEOUT=20
CONFIG_MB_CONTROLLER_NOTIFY_QUEUE_SIZE=20
CONFIG_MB_CONTROLLER_STACK_SIZE=4096
CONFIG_MB_EVENT_QUEUE_TIMEOUT=20
CONFIG_MB_TIMER_PORT_ENABLED=y
CONFIG_MB_TIMER_GROUP=0
CONFIG_MB_TIMER_INDEX=0
# CONFIG_ENABLE_STATIC_TASK_CLEAN_UP_HOOK is not set
CONFIG_TIMER_TASK_PRIORITY=1
CONFIG_TIMER_TASK_STACK_DEPTH=2048
CONFIG_TIMER_QUEUE_LENGTH=10
# CONFIG_L2_TO_L3_COPY is not set
# CONFIG_USE_ONLY_LWIP_SELECT is not set
CONFIG_ESP_GRATUITOUS_ARP=y
CONFIG_GARP_TMR_INTERVAL=60
CONFIG_TCPIP_RECVMBOX_SIZE=32
CONFIG_TCP_MAXRTX=12
CONFIG_TCP_SYNMAXRTX=12
CONFIG_TCP_MSS=1440
CONFIG_TCP_MSL=60000
CONFIG_TCP_SND_BUF_DEFAULT=5744
CONFIG_TCP_WND_DEFAULT=5744
CONFIG_TCP_RECVMBOX_SIZE=6
CONFIG_TCP_QUEUE_OOSEQ=y
# CONFIG_ESP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES is not set
CONFIG_TCP_OVERSIZE_MSS=y
# CONFIG_TCP_OVERSIZE_QUARTER_MSS is not set
# CONFIG_TCP_OVERSIZE_DISABLE is not set
CONFIG_UDP_RECVMBOX_SIZE=6
CONFIG_TCPIP_TASK_STACK_SIZE=3072
CONFIG_TCPIP_TASK_AFFINITY_NO_AFFINITY=y
# CONFIG_TCPIP_TASK_AFFINITY_CPU0 is not set
# CONFIG_TCPIP_TASK_AFFINITY_CPU1 is not set
CONFIG_TCPIP_TASK_AFFINITY=0x7FFFFFFF
# CONFIG_PPP_SUPPORT is not set
CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT=5
CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072
CONFIG_ESP32_PTHREAD_STACK_MIN=768
CONFIG_ESP32_DEFAULT_PTHREAD_CORE_NO_AFFINITY=y
# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_0 is not set
# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_1 is not set
CONFIG_ESP32_PTHREAD_TASK_CORE_DEFAULT=-1
CONFIG_ESP32_PTHREAD_TASK_NAME_DEFAULT="pthread"
CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS=y
# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_FAILS is not set
# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ALLOWED is not set
CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT=y
CONFIG_SUPPORT_TERMIOS=y
CONFIG_SEMIHOSTFS_MAX_MOUNT_POINTS=1
CONFIG_SEMIHOSTFS_HOST_PATH_MAX_LEN=128
# End of deprecated options
C47D commented 3 years ago

Thanks for the information @9ae8sdf76 I will take a look at it and try to figure out why you're getting a white screen output. Did you also bought the display on BuyDisplay or is it a different display?

Regards Carlos

d42ohpaz commented 3 years ago

Did you also bought the display on BuyDisplay or is it a different display?

It is the 7" Display from Adafruit, and the controller is their version of the RA8875.

C47D commented 3 years ago

I just saw an error on the monitor output

E (350) spi_master: check_trans_valid(696): SPI half duplex mode does not support using DMA with both MOSI and MISO phases.

That comment comes from the framework here https://github.com/espressif/esp-idf/blob/b0150615dff529662772a60dcb57d5b559f480e2/components/driver/spi_master.c#L696

I guess we're failing here https://github.com/lvgl/lvgl_esp32_drivers/blob/5f545b37fd198631f07dbe4cc64ad54ef4837fb9/lvgl_tft/disp_spi.c#L267

We should assert so the program doesn't continue 🤕 .

From the CONFIG list I can assume you're not using any touch drivers, can you try disabling the MISO pin from the display configuration?

EDIT Also, can you try configuring the display for full duplex?

d42ohpaz commented 3 years ago

From the CONFIG list I can assume you're not using any touch drivers

I disabled the touch drivers to simplify things. In my main project I do plan to use them.

can you try disabling the MISO pin from the display configuration? ... Also, can you try configuring the display for full duplex?

Sure. Doing that now. 

rst:0x1 (POWERON_RESET),boot:0x17 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:7400
load:0x40078000,len:15000
load:0x40080400,len:4388
0x40080400: _init at ??:?

entry 0x40080694
I (27) boot: ESP-IDF v4.4-dev-4-g73db14240-dirty 2nd stage bootloader
I (27) boot: compile time 14:45:12
I (28) boot: chip revision: 1
I (31) boot_comm: chip revision: 1, min. bootloader chip revision: 0
I (38) qio_mode: Enabling default flash chip QIO
I (44) boot.esp32: SPI Speed      : 40MHz
I (48) boot.esp32: SPI Mode       : QIO
I (53) boot.esp32: SPI Flash Size : 4MB
I (57) boot: Enabling RNG early entropy source...
I (63) boot: Partition Table:
I (66) boot: ## Label            Usage          Type ST Offset   Length
I (74) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (81) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (89) boot:  2 factory          factory app      00 00 00010000 00100000
I (96) boot: End of partition table
I (100) boot_comm: chip revision: 1, min. application chip revision: 0
I (107) esp_image: segment 0: paddr=00010020 vaddr=3f400020 size=24fbch (151484) map
I (161) esp_image: segment 1: paddr=00034fe4 vaddr=3ffb0000 size=03194h ( 12692) load
I (166) esp_image: segment 2: paddr=00038180 vaddr=40080000 size=07e98h ( 32408) load
I (178) esp_image: segment 3: paddr=00040020 vaddr=400d0020 size=3b468h (242792) map
I (251) esp_image: segment 4: paddr=0007b490 vaddr=40087e98 size=04a4ch ( 19020) load
I (265) boot: Loaded app from partition at offset 0x10000
I (265) boot: Disabling RNG early entropy source...
I (277) cpu_start: Pro cpu up.
I (277) cpu_start: Starting app cpu, entry point is 0x400810dc
0x400810dc: call_start_cpu1 at /Users/kstanl27/Downloads/esp-idf-v4.2/components/esp_system/port/cpu_start.c:143

I (0) cpu_start: App cpu up.
I (293) cpu_start: Pro cpu start user code
I (293) cpu_start: cpu freq: 240000000
I (293) cpu_start: Application information:
I (298) cpu_start: Project name:     lvgl-demo
I (303) cpu_start: App version:      v2.0-55-gf2e80cb
I (309) cpu_start: Compile time:     Mar  1 2021 20:17:14
I (315) cpu_start: ELF file SHA256:  69b5507ac6e841f5...
I (321) cpu_start: ESP-IDF:          v4.4-dev-4-g73db14240-dirty
I (328) heap_init: Initializing. RAM available for dynamic allocation:
I (335) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM
I (341) heap_init: At 3FFBC618 len 000239E8 (142 KiB): DRAM
I (347) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM
I (354) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM
I (360) heap_init: At 4008C8E4 len 0001371C (77 KiB): IRAM
I (367) spi_flash: detected chip: generic
I (371) spi_flash: flash io: qio
I (376) cpu_start: Starting scheduler on PRO CPU.
I (0) cpu_start: Starting scheduler on APP CPU.
Info: lv_init ready     (lv_obj.c #231 lv_init())
I (20) lvgl_helpers: Display hor size: 800, ver size: 480
I (20) lvgl_helpers: Display buffer size: 32000
I (30) lvgl_helpers: Initializing SPI master for display
I (30) lvgl_helpers: Configuring SPI host VSPI_HOST (2)
I (30) lvgl_helpers: MISO pin: -1, MOSI pin: 23, SCLK pin: 18, IO2/WP pin: -1, IO3/HD pin: -1
I (50) lvgl_helpers: Max transfer size: 64000 (bytes)
I (50) lvgl_helpers: Initializing SPI bus...
I (50) disp_spi: Adding SPI device
I (60) disp_spi: Clock speed: 40000000Hz, mode: 0, CS pin: 5
I (70) RA8875: Initializing RA8875...
I (270) disp_spi: Changing SPI device clock speed: 1000000
I (270) gpio: GPIO[5]| InputEn: 0| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0 
I (270) disp_spi: Adding SPI device
I (280) disp_spi: Clock speed: 1000000Hz, mode: 0, CS pin: 5
I (330) disp_spi: Changing SPI device clock speed: 40000000
I (330) gpio: GPIO[5]| InputEn: 0| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0 
I (330) disp_spi: Adding SPI device
I (340) disp_spi: Clock speed: 40000000Hz, mode: 0, CS pin: 5
W (1350) RA8875: WARNING: Memory clear timed out; RA8875 may be unresponsive.
I (1350) RA8875: Enabling display.
I (1350) RA8875: Enabling backlight.
C47D commented 3 years ago

Hi,

I no longer see the error on the monitor output, does the display showed up something?

d42ohpaz commented 3 years ago

No, it still does not show up for me. I've been trying every combination I can think of, and I've matched my config with the data sheet and Adafruit's implementation. Still blank screen/no power.

d42ohpaz commented 3 years ago

I've been at this all day, and no matter the combination of options nothing changes. The display is just not getting turned on. I have even gone so far as change code to match Adafruit's implementation, and still no display.

There are two things that have been bothering me:

  1. When using SIO and full-duplex the memory clear operation times out, which warns the controller may be unresponsive (which it is)
  2. When using DIO/QIO and half-duplex, the error about DMA comes up

I feel like I'm stuck in a catch-22 situation where the SIO for my board (wroom 32) just doesn't work, and using half-duplex won't work because somewhere there is DMA blocking its operation. I can't find any way to disable DMA or the RX/TX or anything that'll get me past that error.

I guess it really comes down to why Adafruit can do it (albeit with slow drawing) and this library can't? (I don't mean that negatively).

C47D commented 3 years ago

Hi,

Sorry for the late reply, I'm really busy with my day job (I keep this repo on my free time). I will try to get the same display and controller as yourself but it would take a bit to get here (I'm located in México).

viniciusmiguel commented 3 years ago

Hello There.

I am having the same issue, on my case the display does not even turn on.

I noticed if I set the frequency to 1mhz the message the controller is unresponsive does not shows up.

But it gets stuck in the message:

I (350) RA8875: Enabling display.

stale[bot] commented 3 years ago

This issue or pull request has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.

d42ohpaz commented 3 years ago

@C47D Any update or progress on trying to reproduce this issue?

C47D commented 3 years ago

Hi @9ae8sdf76 , I haven't been able to reproduce it, nor getting up to speed with any other issue in the repo, got pretty busy with my day job. I'm not 100% sure when I will be able to see this again, but I will try this weekend.

stale[bot] commented 3 years ago

This issue or pull request has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.

vandiwa commented 3 years ago

I'm kind of in the same boat, but I've found that if I start by initializing the display using the Arduino XGLCD library, and then without power cycling the display run the ESP-IDF code, the display works fine. I've slowed down the setup process on both sides to compare, and I have rewritten the init to do what the XGLCD init routine does byte for byte, but I still can't get the display to startup and turn on the backlight if I start with the display in the off state. I don't have a physical reset pin connected to the display in either situation, so it seems like the XGLCD library is doing something that my modified routine isn't, but I haven't been able to figure out what that is yet.

vandiwa commented 3 years ago

Took a while, but what I finally figured out is that the spimode was wrong - it should be 3 for the ra8875, but the lvgl_spi_conf.h file (in my version) doesn't have a special case for the RA8875, so it gets set to mode 0 by default. Changed it to 3 and now my init code (that very closely matches the XGLCD Arduino sequence) works.

stale[bot] commented 3 years ago

This issue or pull request has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.

amj2900 commented 2 years ago

Has anyone managed to fix this issue? I'm running into the same thing.

kyrpav commented 2 years ago

What is the correct then setup for RA8875 and lvgl and esp32 . spi mode 3 , spi frequency 1Mhz and full duplex only MOSI to be set and reset pin? Am i missing something cause i can not make it work

D1sconnected commented 1 year ago

@vandiwa Hey there, I'm stuck with RA8875 init routine too, working with Waveshare 7 Inch Display. Could you kindly provide your init code? That would help a lot!