Can not work in Centos7

Hi lwfinger I compile the mater version and install in centos7, but it can not work correctly and no thing in networkmanager. The following is debug message:

[ 7018.887020] usb 1-1: new high-speed USB device number 19 using ehci-pci [ 7019.001895] usb 1-1: New USB device found, idVendor=0bda, idProduct=8179 [ 7019.001899] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7019.001902] usb 1-1: Product: 802.11n NIC [ 7019.001904] usb 1-1: Manufacturer: Realtek [ 7019.001907] usb 1-1: SerialNumber: 00E04C0001 [ 7019.002897] Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_D_CUT_1T1R_RomVer(0) [ 7019.002902] R8188EU: RF_Type is 3!! [ 7019.002905] R8188EU: _ConfigNormalChipOutEP_8188E OutEpQueueSel(0x05), OutEpNumber(2) [ 7019.003122] R8188EU: EEPROM type is E-FUSE [ 7019.003125] R8188EU: ====> _ReadAdapterInfo8188EU [ 7019.003270] R8188EU: Boot from EFUSE, Autoload OK ! [ 7019.003770] R8188EU: [0x00004000,8] [ 7019.003773] HalPwrSeqCmdParsing: offset(0x6) cut_msk(0xff) fab_msk(0xf) interface_msk(0xf) base(0x0) cmd(0x2) msk(0x2) value(0x2) [ 7019.003776] R8188EU: [0x00004000,8] [ 7019.003777] HalPwrSeqCmdParsing: PWR_CMD_POLLING [ 7019.003894] R8188EU: [0x00004000,8] [ 7019.003897] HalPwrSeqCmdParsing: offset(0x2) cut_msk(0xff) fab_msk(0xf) interface_msk(0xf) base(0x0) cmd(0x1) msk(0x3) value(0x0) [ 7019.003900] R8188EU: [0x00004000,8] [ 7019.003901] HalPwrSeqCmdParsing: PWR_CMD_WRITE [ 7019.004394] R8188EU: [0x00004000,8] [ 7019.004397] HalPwrSeqCmdParsing: offset(0x26) cut_msk(0xff) fab_msk(0xf) interface_msk(0xf) base(0x0) cmd(0x1) msk(0x80) value(0x80) [ 7019.004399] R8188EU: [0x00004000,8] [ 7019.004400] HalPwrSeqCmdParsing: PWR_CMD_WRITE [ 7019.004643] R8188EU: [0x00004000,8] [ 7019.004646] HalPwrSeqCmdParsing: offset(0x5) cut_msk(0xff) fab_msk(0xf) interface_msk(0xf) base(0x0) cmd(0x1) msk(0x80) value(0x0) [ 7019.004648] R8188EU: [0x00004000,8] [ 7019.004649] HalPwrSeqCmdParsing: PWR_CMD_WRITE [ 7019.004892] R8188EU: [0x00004000,8] [ 7019.004894] HalPwrSeqCmdParsing: offset(0x5) cut_msk(0xff) fab_msk(0xf) interface_msk(0xf) base(0x0) cmd(0x1) msk(0x18) value(0x0) [ 7019.004896] R8188EU: [0x00004000,8] [ 7019.004897] HalPwrSeqCmdParsing: PWR_CMD_WRITE [ 7019.005333] R8188EU: [0x00004000,8] [ 7019.005336] HalPwrSeqCmdParsing: offset(0x5) cut_msk(0xff) fab_msk(0xf) interface_msk(0xf) base(0x0) cmd(0x1) msk(0x1) value(0x1) [ 7019.005338] R8188EU: [0x00004000,8] [ 7019.005339] HalPwrSeqCmdParsing: PWR_CMD_WRITE [ 7019.005518] R8188EU: [0x00004000,8] [ 7019.005521] HalPwrSeqCmdParsing: offset(0x5) cut_msk(0xff) fab_msk(0xf) interface_msk(0xf) base(0x0) cmd(0x2) msk(0x1) value(0x0) [ 7019.005524] R8188EU: [0x00004000,8] [ 7019.005525] HalPwrSeqCmdParsing: PWR_CMD_POLLING [ 7019.006518] R8188EU: [0x00004000,8] [ 7019.006521] HalPwrSeqCmdParsing: offset(0x23) cut_msk(0xff) fab_msk(0xf) interface_msk(0xf) base(0x0) cmd(0x1) msk(0x10) value(0x0) [ 7019.006524] R8188EU: [0x00004000,8] [ 7019.006525] HalPwrSeqCmdParsing: PWR_CMD_WRITE [ 7019.006766] R8188EU: [0x00004000,8] [ 7019.006769] HalPwrSeqCmdParsing: offset(0x74) cut_msk(0xff) fab_msk(0xf) interface_msk(0x1) base(0x0) cmd(0x1) msk(0x10) value(0x10) [ 7019.006770] R8188EU: [0x00004000,8] [ 7019.006772] HalPwrSeqCmdParsing: offset(0xffff) cut_msk(0xff) fab_msk(0xf) interface_msk(0xf) base(0x0) cmd(0x4) msk(0x0) value(0x0) [ 7019.006774] R8188EU: [0x00004000,8] [ 7019.006775] HalPwrSeqCmdParsing: PWR_CMD_END [ 7019.007518] R8188EU: bFWReady == false call reset 8051... [ 7019.007889] R8188EU: =====> _8051Reset88E(): 8051 reset success . [ 7019.024266] R8188EU: efuse_read_phymap_from_txpktbuf bcnhead:0 [ 7019.025143] R8188EU: efuse_read_phymap_from_txpktbuf len:125, lenc:125 [ 7019.034642] R8188EU: efuse_read_phymap_from_txpktbuf read count:123 [ 7019.035017] EEPROM ID = 0x8129 [ 7019.035020] R8188EU: VID = 0x0BDA, PID = 0x8179 [ 7019.035022] R8188EU: Customer ID: 0x00, SubCustomer ID: 0xCD [ 7019.035024] R8188EU: [0x00008000,7] [ 7019.035027] Hal_EfuseParseMACAddr_8188EU: Permanent Address = 08-57-00-02-a6-1e [ 7019.035029] R8188EU: Hal_ReadPowerSavingMode88E...bHWPwrPindetect(0)-bHWPowerdown(0) , bSupportRemoteWakeup(1) [ 7019.035031] R8188EU: ### PS params => power_mgnt(1), usbss_enable(0) ### [ 7019.035034] R8188EU: ======= Path 0, Channel 0 ======= [ 7019.035035] R8188EU: Index24G_CCK_Base[0][0] = 0x28 [ 7019.035037] R8188EU: Index24G_BW40_Base[0][0] = 0x2c [ 7019.035038] R8188EU: ======= Path 0, Channel 1 ======= [ 7019.035040] R8188EU: Index24G_CCK_Base[0][1] = 0x28 [ 7019.035042] R8188EU: Index24G_BW40_Base[0][1] = 0x2c [ 7019.035043] R8188EU: ======= Path 0, Channel 2 ======= [ 7019.035045] R8188EU: Index24G_CCK_Base[0][2] = 0x28 [ 7019.035046] R8188EU: Index24G_BW40_Base[0][2] = 0x2c [ 7019.035048] R8188EU: ======= Path 0, Channel 3 ======= [ 7019.035049] R8188EU: Index24G_CCK_Base[0][3] = 0x28 [ 7019.035051] R8188EU: Index24G_BW40_Base[0][3] = 0x2c [ 7019.035052] R8188EU: ======= Path 0, Channel 4 ======= [ 7019.035055] R8188EU: Index24G_CCK_Base[0][4] = 0x28 [ 7019.035057] R8188EU: Index24G_BW40_Base[0][4] = 0x2c [ 7019.035058] R8188EU: ======= Path 0, Channel 5 ======= [ 7019.035059] R8188EU: Index24G_CCK_Base[0][5] = 0x28 [ 7019.035061] R8188EU: Index24G_BW40_Base[0][5] = 0x2c [ 7019.035062] R8188EU: ======= Path 0, Channel 6 ======= [ 7019.035064] R8188EU: Index24G_CCK_Base[0][6] = 0x26 [ 7019.035066] R8188EU: Index24G_BW40_Base[0][6] = 0x2b [ 7019.035067] R8188EU: ======= Path 0, Channel 7 ======= [ 7019.035069] R8188EU: Index24G_CCK_Base[0][7] = 0x26 [ 7019.035070] R8188EU: Index24G_BW40_Base[0][7] = 0x2b [ 7019.035072] R8188EU: ======= Path 0, Channel 8 ======= [ 7019.035073] R8188EU: Index24G_CCK_Base[0][8] = 0x26 [ 7019.035075] R8188EU: Index24G_BW40_Base[0][8] = 0x2b [ 7019.035076] R8188EU: ======= Path 0, Channel 9 ======= [ 7019.035078] R8188EU: Index24G_CCK_Base[0][9] = 0x25 [ 7019.035079] R8188EU: Index24G_BW40_Base[0][9] = 0x2a [ 7019.035081] R8188EU: ======= Path 0, Channel 10 ======= [ 7019.035083] R8188EU: Index24G_CCK_Base[0][10] = 0x25 [ 7019.035085] R8188EU: Index24G_BW40_Base[0][10] = 0x2a [ 7019.035086] R8188EU: ======= Path 0, Channel 11 ======= [ 7019.035088] R8188EU: Index24G_CCK_Base[0][11] = 0x25 [ 7019.035090] R8188EU: Index24G_BW40_Base[0][11] = 0x2a [ 7019.035091] R8188EU: ======= Path 0, Channel 12 ======= [ 7019.035092] R8188EU: Index24G_CCK_Base[0][12] = 0x25 [ 7019.035094] R8188EU: Index24G_BW40_Base[0][12] = 0x2a [ 7019.035095] R8188EU: ======= Path 0, Channel 13 ======= [ 7019.035097] R8188EU: Index24G_CCK_Base[0][13] = 0x25 [ 7019.035099] R8188EU: Index24G_BW40_Base[0][13] = 0x2a [ 7019.035100] R8188EU: ======= TxCount 0 ======= [ 7019.035101] R8188EU: CCK_24G_Diff[0][0] = 0 [ 7019.035103] R8188EU: OFDM_24G_Diff[0][0] = 1 [ 7019.035105] R8188EU: BW20_24G_Diff[0][0] = -1 [ 7019.035107] R8188EU: BW40_24G_Diff[0][0] = 0 [ 7019.035108] R8188EU: ======= TxCount 1 ======= [ 7019.035109] R8188EU: CCK_24G_Diff[0][1] = -2 [ 7019.035111] R8188EU: OFDM_24G_Diff[0][1] = -2 [ 7019.035112] R8188EU: BW20_24G_Diff[0][1] = -2 [ 7019.035114] R8188EU: BW40_24G_Diff[0][1] = -2 [ 7019.035115] R8188EU: ======= TxCount 2 ======= [ 7019.035117] R8188EU: CCK_24G_Diff[0][2] = -2 [ 7019.035118] R8188EU: OFDM_24G_Diff[0][2] = -2 [ 7019.035119] R8188EU: BW20_24G_Diff[0][2] = -2 [ 7019.035121] R8188EU: BW40_24G_Diff[0][2] = -2 [ 7019.035122] R8188EU: ======= TxCount 3 ======= [ 7019.035123] R8188EU: CCK_24G_Diff[0][3] = -2 [ 7019.035125] R8188EU: OFDM_24G_Diff[0][3] = -2 [ 7019.035127] R8188EU: BW20_24G_Diff[0][3] = -2 [ 7019.035129] R8188EU: BW40_24G_Diff[0][3] = -2 [ 7019.035130] R8188EU: EEPROMRegulatory = 0x0 [ 7019.035132] R8188EU: [0x00008000,8] [ 7019.035133] Hal_EfuseParseEEPROMVer(), EEVer = 0 [ 7019.035135] R8188EU: mlmepriv.ChannelPlan = 0x20 [ 7019.035136] R8188EU: CrystalCap: 0x20 [ 7019.035138] R8188EU: EEPROM Customer ID: 0x 0 [ 7019.035139] R8188EU: EEPROM : AntDivCfg = 0, TRxAntDivType = 3 [ 7019.035141] R8188EU: Board Type: 0x 0 [ 7019.035142] R8188EU: ThermalMeter = 0x1a [ 7019.035144] R8188EU: <==== _ReadAdapterInfo8188EU in 32 ms [ 7019.035146] R8188EU: [0x00000800,8] [ 7019.035148] +rtw_init_drv_sw [ 7019.035416] R8188EU: [0x00000040,8] [ 7019.035418] rtw_alloc_stainfo: index=3 [ 7019.035420] R8188EU: [0x00000040,8] [ 7019.035422] alloc number_1 stainfo with hwaddr = ff:ff:ff:ff:ff:ff [ 7019.035427] R8188EU: [0x00000010,8] [ 7019.035428] pregistrypriv->channel=1, pdev_network->Configuration.DSConfig=0x1 [ 7019.035435] R8188EU: [0x00000800,8] [ 7019.035436] -rtw_init_drv_sw [ 7019.035450] R8188EU: padapter->pwrctrlpriv.bSupportRemoteWakeup~~ [ 7019.035452] R8188EU: padapter->pwrctrlpriv.bSupportRemoteWakeup~~~[1]~~~ [ 7019.035456] R8188EU: can't get autopm: [ 7019.035463] R8188EU: rtw_macaddr_cfg MAC Address = 08:57:00:02:a6:1e [ 7019.035465] R8188EU: MAC Address from pnetdev->dev_addr = 08:57:00:02:a6:1e [ 7019.038166] R8188EU: bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0 [ 7019.038171] R8188EU: [0x00100000,5] [ 7019.038172] -871x_drv - drv_init, success! [ 7019.059273] systemd-udevd[7861]: renamed network interface wlan0 to wlp0s29f7u1

What's wrong?

Thank you!

lwfinger / rtl8188eu

Can not work in Centos7 #113