Closed arifrahmanumam closed 1 month ago
Thanks for your report. I pushed a fix.
How is the progress on this issue? Is there anyone who can provide a solution?
I pushed a fix. You can run git pull
and make
and try again.
Thank you! With your help, my USB Wi-Fi adapter "CHANEVE RTL8812AU" is now functioning properly and supports monitor mode.
The problem now is that I can’t switch it back to managed mode. When I try to revert to managed mode, it stays in monitor mode unless I unplug the USB Wi-Fi adapter and plug it back in, then it switches to managed mode. However, this isn't a major issue. Once again, thank you for your help!
I am using the USB WiFi adapter "CHANEVE RTL8812AU." CHANEVE RTL8812AU
![RTL8812AU BACK](https://github.com/lwfinger/rtw88/assets/28881044/adfa0dd0-0c6f-4644-8b52-4328d2bc67e7)
uname -r : 6.8.11-amd64
mokutil --sb-state : SecureBoot disabled
lsusb :
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 8087:0a2a Intel Corp. Bluetooth wireless interface Bus 001 Device 004: ID 1bcf:2cb0 Sunplus Innovation Technology Inc. HD User Facing Bus 001 Device 005: ID 1c7a:0570 LighTuning Technology Inc. EgisTec Touch Fingerprint Sensor Bus 001 Device 010: ID 0bda:8812 Realtek Semiconductor Corp. RTL8812AU 802.11a/b/g/n/ac 2T2R DB WLAN Adapter Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
lsusb -t : /: Bus 001.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/12p, 480M | Port 001: Dev 010, If 0, Class=Vendor Specific Class, Driver=[none], 480M | Port 005: Dev 003, If 0, Class=Wireless, Driver=btusb, 12M | Port 005: Dev 003, If 1, Class=Wireless, Driver=btusb, 12M | Port 007: Dev 004, If 0, Class=Video, Driver=uvcvideo, 480M | Port 007: Dev 004, If 1, Class=Video, Driver=uvcvideo, 480M | Port 009: Dev 005, If 0, Class=Vendor Specific Class, Driver=[none], 12M /: Bus 002.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/6p, 5000M
lsmod | grep rtw :![lsmod | grep rtw](https://github.com/lwfinger/rtw88/assets/28881044/a4f84d69-03b8-49c6-8b9d-fad72cdac82a)
rtw_8812au 12288 0 rtw_8821a 114688 1 rtw_8812au rtw_usb 28672 1 rtw_8812au rtw_core 315392 2 rtw_usb,rtw_8821a mac80211 1396736 3 rtw_usb,rtw_core,iwlmvm cfg80211 1355776 4 rtw_core,iwlmvm,iwlwifi,mac80211 usbcore 409600 6 xhci_hcd,rtw_usb,uvcvideo,btusb,xhci_pci,rtw_8812au
I have tried blacklisting : 'rtw_8821a' but there has been no change at all.
Disable/Enable a Kernel Module :![sudo modprobe](https://github.com/lwfinger/rtw88/assets/28881044/10dc3ff0-2ab3-4fac-a641-a244bb221fc9)
dmesg | grep rtw : [ 5.431263] rtw_core: loading out-of-tree module taints kernel. [ 5.431269] rtw_core: module verification failed: signature and/or required key missing - tainting kernel [ 5.490206] rtw_8812au 1-1:1.0: firmware: direct-loading firmware rtw88/rtw8812a_fw.bin [ 5.490356] rtw_8812au 1-1:1.0: Firmware version 52.14.0, H2C version 0 [ 5.534670] rtw_8812au 1-1:1.0: rfe 1 isn't supported [ 5.534718] rtw_8812au 1-1:1.0: failed to setup chip efuse info [ 5.534720] rtw_8812au 1-1:1.0: failed to setup chip information [ 5.535156] usbcore: registered new interface driver rtw_8812au [ 8.487031] Modules linked in: overlay qrtr sunrpc binfmt_misc nls_ascii nls_cp437 vfat fat snd_soc_skl_ssp_clk snd_sof_pci_intel_skl snd_sof_intel_hda_common soundwire_intel soundwire_generic_allocation snd_sof_intel_hda_mlink soundwire_cadence snd_sof_intel_hda intel_uncore_frequency intel_uncore_frequency_common snd_sof_pci snd_sof_xtensa_dsp snd_sof snd_soc_skl_hda_dsp snd_soc_hdac_hdmi btusb snd_soc_intel_hda_dsp_common btrtl snd_sof_utils rtw_8812au(OE) soundwire_bus snd_hda_codec_realtek btintel x86_pkg_temp_thermal btbcm rtw_8821a(OE) intel_powerclamp btmtk iwlmvm rtw_usb(OE) snd_soc_avs snd_hda_codec_generic rtw_core(OE) coretemp snd_soc_hda_codec snd_soc_dmic bluetooth kvm_intel snd_soc_skl snd_soc_hdac_hda mac80211 iwlwifi uvcvideo snd_hda_ext_core snd_soc_sst_ipc kvm snd_soc_sst_dsp snd_soc_acpi_intel_match videobuf2_vmalloc snd_soc_acpi libarc4 sha3_generic uvc jitterentropy_rng snd_soc_core mei_hdcp mei_pxp irqbypass intel_rapl_msr cfg80211 videobuf2_memops videobuf2_v4l2 snd_compress drbg videodev [ 18.043512] rtw_8812au 1-1:1.0: firmware: direct-loading firmware rtw88/rtw8812a_fw.bin [ 18.043867] rtw_8812au 1-1:1.0: Firmware version 52.14.0, H2C version 0 [ 18.087239] rtw_8812au 1-1:1.0: rfe 1 isn't supported [ 18.087289] rtw_8812au 1-1:1.0: failed to setup chip efuse info [ 18.087296] rtw_8812au 1-1:1.0: failed to setup chip information [ 21.623821] rtw_8812au 1-2:1.0: firmware: direct-loading firmware rtw88/rtw8812a_fw.bin [ 21.624204] rtw_8812au 1-2:1.0: Firmware version 52.14.0, H2C version 0 [ 21.668253] rtw_8812au 1-2:1.0: rfe 1 isn't supported [ 21.668302] rtw_8812au 1-2:1.0: failed to setup chip efuse info [ 21.668310] rtw_8812au 1-2:1.0: failed to setup chip information [ 36.860998] usbcore: deregistering interface driver rtw_8812au [ 45.428276] rtw_8812au 1-2:1.0: firmware: direct-loading firmware rtw88/rtw8812a_fw.bin [ 45.428446] rtw_8812au 1-2:1.0: Firmware version 52.14.0, H2C version 0 [ 45.470214] rtw_8812au 1-2:1.0: rfe 1 isn't supported [ 45.470252] rtw_8812au 1-2:1.0: failed to setup chip efuse info [ 45.470254] rtw_8812au 1-2:1.0: failed to setup chip information [ 45.470815] usbcore: registered new interface driver rtw_8812au [ 93.557469] rtw_8812au 1-4:1.0: firmware: direct-loading firmware rtw88/rtw8812a_fw.bin [ 93.557877] rtw_8812au 1-4:1.0: Firmware version 52.14.0, H2C version 0 [ 93.600221] rtw_8812au 1-4:1.0: rfe 1 isn't supported [ 93.600259] rtw_8812au 1-4:1.0: failed to setup chip efuse info [ 93.600262] rtw_8812au 1-4:1.0: failed to setup chip information [ 359.421830] rtw_8812au 1-2:1.0: firmware: direct-loading firmware rtw88/rtw8812a_fw.bin [ 359.421985] rtw_8812au 1-2:1.0: Firmware version 52.14.0, H2C version 0 [ 359.464093] rtw_8812au 1-2:1.0: rfe 1 isn't supported [ 359.464131] rtw_8812au 1-2:1.0: failed to setup chip efuse info [ 359.464133] rtw_8812au 1-2:1.0: failed to setup chip information [ 4747.774667] rtw_8812au 1-1:1.0: firmware: direct-loading firmware rtw88/rtw8812a_fw.bin [ 4747.775255] rtw_8812au 1-1:1.0: Firmware version 52.14.0, H2C version 0 [ 4747.819401] rtw_8812au 1-1:1.0: rfe 1 isn't supported [ 4747.819439] rtw_8812au 1-1:1.0: failed to setup chip efuse info [ 4747.819441] rtw_8812au 1-1:1.0: failed to setup chip information