Use this form to report bugs in an Official Release of SoftRF firmware, hardware and web pages only ;
Issue reports from anonymous users will be most likely invalidated. Reasons for that are well explained here ;
Prior to asking a question, look into "Closed issues" area to see if it was answered before ;
No any "ideas" or new feature requests, please ! New feature requests do not subject for taking into consideration unless they come from co-developers ;
"Enhancements" of existing features are only allowed when you are ready to implement them by yourself. See CONTRIBUTING list for details ;
Recommended:
screenshot or photo width - from 600 to 800 pixels ;
aspect ratio - 4:3, 3:4, 16:9 or 9:16.
substitute 'space' by 'x' character to mark a hardware checkbox
Hardware
[ ] Standalone
[ ] Badge
[ ] Prime Mark III
[x] Prime Mark II
[ ] Dongle
[ ] SkyView EZ
[ ] SkyView Pico
[ ] Uni
[ ] Ham
[ ] Midi
[ ] Mini
[ ] Academy
[ ] Lego
[ ] ES Edition
[ ] Balkan
[ ] Raspberry Edition
[ ] UAV
[ ] WebTop Serial
[ ] WebTop USB
[ ] UAT978 module
[ ] Flight Recorder
< photo of your hardware > (required)
Firmware version
< screenshot of WebUI and/or SoftRF Tool status page > (required)
The center frequency used in NZ is 869.25MHz. This is the same as used by the old OzFlarm (no longer in production) and by OGN.
The Classic Flarm, LX Flarms, LX Navigation Flarms, Power Flarms all use 869.20 as the center frequency.
I noticed this when I was setting up an OGN groundstation and had to monitor a wider frequency range to be able to see those Flarms. The data I logged from ogn-decode shows two clusters of frequencies in use at around 869.20 and 869.25.
Can the center frequency for NZ be changed to 869.20 for better compatability with modern Flarms?
lyusupov
commented
7 months ago
ATTENTION !
Recommended:
Hardware
< photo of your hardware > (required)
Firmware version
< screenshot of WebUI and/or SoftRF Tool status page > (required)
Firmware settings
< screenshot of WebUI and/or SoftRF Tool settings page > (required)
Describe the bug
The center frequency used in NZ is 869.25MHz. This is the same as used by the old OzFlarm (no longer in production) and by OGN.
The Classic Flarm, LX Flarms, LX Navigation Flarms, Power Flarms all use 869.20 as the center frequency.
I noticed this when I was setting up an OGN groundstation and had to monitor a wider frequency range to be able to see those Flarms. The data I logged from ogn-decode shows two clusters of frequencies in use at around 869.20 and 869.25.
Can the center frequency for NZ be changed to 869.20 for better compatability with modern Flarms?
To Reproduce
Expected behavior