Closed BrianJSavage closed 7 months ago
No any of the checkmarks applied:
One should follow the Quick Start instructions to succeed.
This report is not an issue related to the SoftRF, SkyView or WebTop firmware. LilyGO Forum or SoftRF users Community Gitter chat room are the areas to ask generic questions.
Resolution: invalid
Hi Linar,
Thanks for very prompt response
Duh, of course. Never done this before. All working now and connected to the T-Beam Supreme.
I have been testing using a nearby (3m away) T-Echo, along with XcSoar, all works like a dream!
Now to get it wired into the glider.
Thanks again for your help,
Brian
From: Linar Yusupov @.> Sent: Saturday, February 10, 2024 4:45 PM To: lyusupov/SoftRF @.> Cc: Brian Savage @.>; Author @.> Subject: Re: [lyusupov/SoftRF] Issues with Flashing binaries to SkyView EZ (Issue #154)
No any of the checkmarks applied:
image.png (view on web) https://github.com/lyusupov/SoftRF/assets/5849637/7fb40fb8-ce9c-4862-b863-bab2514bdcb5
One should follow the https://github.com/lyusupov/SoftRF/wiki/SkyView.-Quick-start Quick Start instructions to succeed.
Resolution: invalid
— Reply to this email directly, view it on GitHub https://github.com/lyusupov/SoftRF/issues/154#issuecomment-1936843202 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AJXNFTB7VLIE3O25ZCSZECDYS3ULVAVCNFSM6AAAAABDCHZ5WOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMZWHA2DGMRQGI . You are receiving this because you authored the thread. https://github.com/notifications/beacon/AJXNFTG3HPPWVTUHSJS5X63YS3ULVA5CNFSM6AAAAABDCHZ5WOWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTTTOHQ4E.gif Message ID: < @.> @.>
The board I ordered of AliExpress is: LILYGO® TTGO T5S V2.8 ESP32 2.7 Inch Screen E-Paper Module I2S DAC MAX98357A Microphone ICS43434 SD Card Buletooth Board
I downloaded the Flash download tool from Expressif. I chose ESP32 on startup, and copied in the binaries as shown in the screenshot below. After running screen is now locked on one of the initial startup screens. The app is different to your sample in the repo, in that there is no flash size panel. Also, there were two options for the SkyView.ino.bin file on the repo, SkyView_C105.ino.bin and C209, I tried both. The log from the Com window is also below. There are some errors in the log, and I am unsure as to what to try next. Help! Cheers Brian
Log:
F:\My Documents D\Downloads\flash_download_tool_3.9.5\flash_download_tool_3.9.5 F:\My Documents D\Downloads\SoftRF-master\SoftRF-master\software\firmware\binaries\ESP32\SkyView\SkyView-firmware-v0.13-ESP32\boot_app0.bin 1 kill F:\My Documents D\Downloads\SoftRF-master\SoftRF-master\software\firmware\binaries\ESP32\SkyView\SkyView-firmware-v0.13-ESP32 F:\My Documents D\Downloads\SoftRF-master\SoftRF-master\software\firmware\binaries\ESP32\SkyView\SkyView-firmware-v0.13-ESP32\bootloader_dio_80m.bin 2 kill F:\My Documents D\Downloads\SoftRF-master\SoftRF-master\software\firmware\binaries\ESP32\SkyView\SkyView-firmware-v0.13-ESP32 F:\My Documents D\Downloads\SoftRF-master\SoftRF-master\software\firmware\binaries\ESP32\SkyView\SkyView-firmware-v0.13-ESP32\SkyView.ino.partitions.bin 3 kill F:\My Documents D\Downloads\SoftRF-master\SoftRF-master\software\firmware\binaries\ESP32\SkyView\SkyView-firmware-v0.13-ESP32 F:\My Documents D\Downloads\SoftRF-master\SoftRF-master\software\firmware\binaries\ESP32\SkyView\SkyView-firmware-v0.13-ESP32\SkyView_C105.ino.bin 4 kill . Uploading stub... Running stub... Stub running... Changing baud rate to 921600 Changed. NO XMC flash detected! FLASH_CRYPT_CNT 0 ABS_DONE_0 False
is stub and send flash finish . Uploading stub... Running stub... Stub running... Changing baud rate to 115200 Changed. FLASH_CRYPT_CNT 0 ABS_DONE_0 False . Uploading stub... Running stub... Stub running... Changing baud rate to 921600 Changed. NO XMC flash detected! FLASH_CRYPT_CNT 0 ABS_DONE_0 False
is stub and send flash finish F:\My Documents D\Downloads\SoftRF-master\SoftRF-master\software\firmware\binaries\ESP32\SkyView\SkyView-firmware-v0.13-ESP32 F:\My Documents D\Downloads\SoftRF-master\SoftRF-master\software\firmware\binaries\ESP32\SkyView\SkyView-firmware-v0.13-ESP32\SkyView_C209.ino.bin . Uploading stub... Running stub... Stub running... Changing baud rate to 115200 Changed. FLASH_CRYPT_CNT 0 ABS_DONE_0 False . Uploading stub... Running stub... Stub running... Changing baud rate to 921600 Changed. NO XMC flash detected! FLASH_CRYPT_CNT 0 ABS_DONE_0 False
is stub and send flash finish F:\My Documents D\Downloads\SoftRF-master\SoftRF-master\software\firmware\binaries\ESP32\SkyView\SkyView-firmware-v0.13-ESP32
Hardware
Firmware version
< screenshot of WebUI and/or SoftRF Tool status page > (required)
Firmware settings
< screenshot of WebUI and/or SoftRF Tool settings page > (required)
Describe the bug
To Reproduce
Expected behavior