Devices using SoftRF are not visible to GXAirCom or Skytraxx using any protocol

[cyberorg]

ATTENTION !

• Use this form to report bugs in an Official Release of SoftRF firmware, hardware and web pages only ;
• Issue reports from anonymous users will be most likely invalidated. Reasons for that are well explained here ;
• Prior to asking a question, look into "Closed issues" area to see if it was answered before ;
• No any "ideas" or new feature requests, please ! New feature requests do not subject for taking into consideration unless they come from co-developers ;
• "Enhancements" of existing features are only allowed when you are ready to implement them by yourself. See CONTRIBUTING list for details ;

Recommended:

• screenshot or photo width - from 600 to 800 pixels ;
• aspect ratio - 4:3, 3:4, 16:9 or 9:16.
• substitute 'space' by 'x' character to mark a hardware checkbox

---

Hardware

• [ ] Badge

< photo of your hardware > (required)

Firmware version

Multiple < screenshot of WebUI and/or SoftRF Tool status page > (required)

Firmware settings

< screenshot of WebUI and/or SoftRF Tool settings page > (required)

I have tried different protocols as well as region frequencies.

Describe the bug

Devices using SoftRF are not visible to GXAirCom or Skytraxx using any protocol. GXAirCom ground station can see Skytraxx device on FANET and vice-versa, but neither of them see SoftRF device. All the SoftRF devices can see each other.

To Reproduce

Power on SoftRF device near Skytraxx or GXAirCom.

Expected behavior

The devices should be visible to each other using FANET protocol.

Also reported here: https://github.com/gereic/GXAirCom/issues/169

[lyusupov]

Works fine to me with GXAirCom

Resolution: unable to reproduce

[cyberorg]

This is the config I am using, could you share yours?

$PSRFC,1,0,5,1,7,1,0,2,2,1,0,1,1,5,0,0,0,0,0*4F

I downgraded the GXAirCom to the lowest available at the moment to test also, didn't find the version you are using. I was using the latest version.

Here are the 3 devices, as you can see GXAirCom and skytraxx see each other, but neither show SoftRF and the t-echo also show 0 ACFTS.

I have tried on multiple t-echos, they can see each other.

[lyusupov]

Ask SoftRF users Gitter community https://gitter.im/lyusupov/SoftRF to help you.