1480c1
commented
5 months ago Closed Fishman0919 closed 5 months ago
1480c1
commented
5 months ago 1480c1
commented
5 months ago Comment if it doesn't work
Fishman0919
commented
5 months ago Nope, same.
19:39:11 Running git update for ffmpeg... 19:39:12 ┌ ffmpeg git ............................... [Recently updated] 19:39:12 ├ Changing options to comply to nonfree... CUDA_PATH environment variable not set or directory does not exist. 19:39:19 ├ Compiling static FFmpeg... 19:39:20 ├ Running configure... Likely error (tail of the failed operation logfile): CXXFLAGS: -D_FORTIFY_SOURCE=2 -fstack-protector-strong -mtune=generic -O2 -pipe -D__USE_MINGW_ANSI_STDIO=1 LDFLAGS: -D_FORTIFY_SOURCE=2 -fstack-protector-strong -mtune=generic -O2 -pipe -D__USE_MINGW_ANSI_STDIO=1 -static-libgcc --start-no-unused-arguments -static-libstdc++ --end-no-unused-arguments -L/local64/lib -L/mingw64/lib ../configure --prefix=/local64 --bindir=/local64/bin-video --pkg-config=pkgconf --pkg-config-flags=--keep-system-libs --keep-system-cflags --static --cc=clang --cxx=clang++ --ld=clang++ --extra-cxxflags=-fpermissive --extra-cflags=-Wno-int-conversion --disable-autodetect --enable-amf --enable-bzlib --enable-cuda --enable-cuvid --enable-d3d11va --enable-dxva2 --enable-iconv --enable-lzma --enable-nvenc --enable-zlib --enable-sdl2 --enable-ffnvcodec --enable-nvdec --enable-cuda-llvm --enable-libmp3lame --enable-libopus --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libx265 --enable-libdav1d --enable-libaom --disable-debug --enable-libfdk-aac --enable-fontconfig --enable-libass --enable-libbluray --enable-libfreetype --enable-libmfx --enable-libmysofa --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvo-amrwbenc --enable-libwebp --enable-libxml2 --enable-libzimg --enable-libshine --enable-gpl --enable-avisynth --enable-libxvid --enable-libopenmpt --enable-version3 --enable-librav1e --enable-libsrt --enable-libgsm --enable-libvmaf --enable-libsvtav1 --enable-chromaprint --enable-decklink --enable-frei0r --enable-libaribb24 --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libflite --enable-libfribidi --enable-libgme --enable-libilbc --enable-libsvthevc --enable-libsvtvp9 --enable-libkvazaar --enable-libmodplug --enable-librist --enable-librtmp --enable-librubberband --enable-libtesseract --enable-libxavs --enable-libzmq --enable-libzvbi --enable-openal --enable-libcodec2 --enable-ladspa --enable-libglslang --enable-vulkan --enable-libdavs2 --enable-libxavs2 --enable-libuavs3d --enable-libplacebo --enable-libjxl --enable-opencl --enable-opengl --enable-libopenh264 --enable-openssl --extra-cflags=-DLIBTWOLAME_STATIC --extra-libs=-lstdc++ --extra-cflags=-DCACA_STATIC --extra-cflags=-DMODPLUG_STATIC --extra-cflags=-DCHROMAPRINT_NODLL --extra-libs=-lstdc++ --extra-cflags=-DZMQ_STATIC --extra-libs=-lpsapi --extra-cflags=-DLIBXML_STATIC --extra-libs=-liconv --disable-w32threads --extra-cflags=-DKVZ_STATIC_LIB --enable-nonfree --extra-cflags=-DAL_LIBTYPE_STATIC --extra-cflags=-IC:/MABS/local64/include --extra-cflags=-IC:/MABS/local64/include/AL --extra-version=geb4584f994+4 ERROR: openal not found
If you think configure made a mistake, make sure you are using the latest version from Git. If the latest version fails, report the problem to the ffmpeg-user@ffmpeg.org mailing list or IRC #ffmpeg on irc.libera.chat. Include the log file "ffbuild/config.log" produced by configure as this will help solve the problem. configure failed. Check C:/MABS/build/ffmpeg-git/build-static-64bit/ab-suite.configure.log This is required for other packages, so this script will exit. 19:41:39 Creating diagnostics file...
Attach C:\MABS\build\logs.zip to the GitHub issue. Make sure the suite is up-to-date before reporting an issue. It might've been fixed already.
Try running the build again at a later time.
18:08:00 Running git update for ffmpeg... 18:08:16 ┌ ffmpeg git ............................... [Recently updated] 18:08:16 ├ Changing options to comply to nonfree... CUDA_PATH environment variable not set or directory does not exist. 18:08:24 ├ Compiling static FFmpeg... 18:08:24 ├ Running configure... Likely error (tail of the failed operation logfile): CXXFLAGS: -D_FORTIFY_SOURCE=2 -fstack-protector-strong -mtune=generic -O2 -pipe -D__USE_MINGW_ANSI_STDIO=1 LDFLAGS: -D_FORTIFY_SOURCE=2 -fstack-protector-strong -mtune=generic -O2 -pipe -D__USE_MINGW_ANSI_STDIO=1 -static-libgcc --start-no-unused-arguments -static-libstdc++ --end-no-unused-arguments -L/local64/lib -L/mingw64/lib ../configure --prefix=/local64 --bindir=/local64/bin-video --pkg-config=pkgconf --pkg-config-flags=--keep-system-libs --keep-system-cflags --static --cc=clang --cxx=clang++ --ld=clang++ --extra-cxxflags=-fpermissive --extra-cflags=-Wno-int-conversion --disable-autodetect --enable-amf --enable-bzlib --enable-cuda --enable-cuvid --enable-d3d11va --enable-dxva2 --enable-iconv --enable-lzma --enable-nvenc --enable-zlib --enable-sdl2 --enable-ffnvcodec --enable-nvdec --enable-cuda-llvm --enable-libmp3lame --enable-libopus --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libx265 --enable-libdav1d --enable-libaom --disable-debug --enable-libfdk-aac --enable-fontconfig --enable-libass --enable-libbluray --enable-libfreetype --enable-libmfx --enable-libmysofa --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvo-amrwbenc --enable-libwebp --enable-libxml2 --enable-libzimg --enable-libshine --enable-gpl --enable-avisynth --enable-libxvid --enable-libopenmpt --enable-version3 --enable-librav1e --enable-libsrt --enable-libgsm --enable-libvmaf --enable-libsvtav1 --enable-chromaprint --enable-decklink --enable-frei0r --enable-libaribb24 --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libflite --enable-libfribidi --enable-libgme --enable-libilbc --enable-libsvthevc --enable-libsvtvp9 --enable-libkvazaar --enable-libmodplug --enable-librist --enable-librtmp --enable-librubberband --enable-libtesseract --enable-libxavs --enable-libzmq --enable-libzvbi --enable-openal --enable-libcodec2 --enable-ladspa --enable-libglslang --enable-vulkan --enable-libdavs2 --enable-libxavs2 --enable-libuavs3d --enable-libplacebo --enable-libjxl --enable-opencl --enable-opengl --enable-libopenh264 --enable-openssl --extra-cflags=-DLIBTWOLAME_STATIC --extra-libs=-lstdc++ --extra-cflags=-DCACA_STATIC --extra-cflags=-DMODPLUG_STATIC --extra-cflags=-DCHROMAPRINT_NODLL --extra-libs=-lstdc++ --extra-cflags=-DZMQ_STATIC --extra-libs=-lpsapi --extra-cflags=-DLIBXML_STATIC --extra-libs=-liconv --disable-w32threads --extra-cflags=-DKVZ_STATIC_LIB --enable-nonfree --extra-cflags=-DAL_LIBTYPE_STATIC --extra-cflags=-IC:/MABS/local64/include --extra-cflags=-IC:/MABS/local64/include/AL --extra-version=geb4584f994+4 ERROR: openal not found
If you think configure made a mistake, make sure you are using the latest version from Git. If the latest version fails, report the problem to the ffmpeg-user@ffmpeg.org mailing list or IRC #ffmpeg on irc.libera.chat. Include the log file "ffbuild/config.log" produced by configure as this will help solve the problem. configure failed. Check C:/MABS/build/ffmpeg-git/build-static-64bit/ab-suite.configure.log This is required for other packages, so this script will exit. 18:10:54 Creating diagnostics file...
Attach C:\MABS\build\logs.zip to the GitHub issue. Make sure the suite is up-to-date before reporting an issue. It might've been fixed already.
Try running the build again at a later time.
logs.zip