search

m-labs / artiq

A leading-edge control system for quantum information experiments
https://m-labs.hk/artiq
GNU Lesser General Public License v3.0
426 stars 198 forks source link

artiq_flash.sh -t pipistrello fails to find board #124

Closed ghost closed 8 years ago

ghost commented 9 years ago

udev rule applied. problem persists following reboot. 

rabi@britton-VirtualBox:~$ artiq_flash.sh -t pipistrello
Flashing failed. Maybe you do not have permission to access the USB device?
To fix this you might want to add a udev rule by doing:
$ sudo cp /home/rabi/anaconda3/lib/python3.4/site-packages/artiq/misc/99-papilio.rules /etc/udev/rules.d
Then unplug/replug your device and try flashing again

Other reason could be that you chosed the wrong target
Please make sure you used the correct -t option (currently: pipistrello)
rabi@britton-VirtualBox:~$ conda list artiq
# packages in environment at /home/rabi/anaconda3:
#
artiq                     0.0                     np_1521  
llvmlite-artiq            0.5.1                    py34_4  
rabi@britton-VirtualBox:~$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.19.0-26-generic (buildd@lgw01-04) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #28~14.04.1-Ubuntu SMP Wed Aug 12 14:09:17 UTC 2015 (Ubuntu 3.19.0-26.28~14.04.1-generic 3.19.8-ckt4)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-26-generic root=UUID=6f255724-bf75-4ddf-b329-d78c630c080c ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005dbeffff] usable
[    0.000000] BIOS-e820: [mem 0x000000005dbf0000-0x000000005dbfffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x5dbf0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR variable ranges disabled:
[    0.000000] PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
[    0.000000] CPU MTRRs all blank - virtualized system.
[    0.000000] found SMP MP-table at [mem 0x0009fff0-0x0009ffff] mapped at [ffff88000009fff0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE
[    0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE
[    0.000000] BRK [0x01fd6000, 0x01fd6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x5d800000-0x5d9fffff]
[    0.000000]  [mem 0x5d800000-0x5d9fffff] page 2M
[    0.000000] BRK [0x01fd7000, 0x01fd7fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x40000000-0x5d7fffff]
[    0.000000]  [mem 0x40000000-0x5d7fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20000000-0x3fffffff]
[    0.000000]  [mem 0x20000000-0x3fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x5da00000-0x5dbeffff]
[    0.000000]  [mem 0x5da00000-0x5dbeffff] page 4k
[    0.000000] BRK [0x01fd8000, 0x01fd8fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35a2c000-0x36d0dfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000E0000 000024 (v02 VBOX  )
[    0.000000] ACPI: XSDT 0x000000005DBF0030 00003C (v01 VBOX   VBOXXSDT 00000001 ASL  00000061)
[    0.000000] ACPI: FACP 0x000000005DBF00F0 0000F4 (v04 VBOX   VBOXFACP 00000001 ASL  00000061)
[    0.000000] ACPI: DSDT 0x000000005DBF0470 001BF1 (v01 VBOX   VBOXBIOS 00000002 INTL 20100528)
[    0.000000] ACPI: FACS 0x000000005DBF0200 000040
[    0.000000] ACPI: FACS 0x000000005DBF0200 000040
[    0.000000] ACPI: APIC 0x000000005DBF0240 000054 (v02 VBOX   VBOXAPIC 00000001 ASL  00000061)
[    0.000000] ACPI: SSDT 0x000000005DBF02A0 0001CC (v01 VBOX   VBOXCPUT 00000002 INTL 20100528)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000005dbeffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x5dbeb000-0x5dbeffff]
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:5dbe7001, primary cpu clock
[    0.000000]  [ffffea0000000000-ffffea00017fffff] PMD -> [ffff88005ba00000-ffff88005d1fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0x5dbeffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x5dbeffff]
[    0.000000] Initmem setup node 0 [mem 0x00001000-0x5dbeffff]
[    0.000000] On node 0 totalpages: 383886
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 5936 pages used for memmap
[    0.000000]   DMA32 zone: 379888 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x5dc00000-0xfffbffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 31 pages/cpu @ffff88005d800000 s86144 r8192 d32640 u2097152
[    0.000000] pcpu-alloc: s86144 r8192 d32640 u2097152 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 377865
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-26-generic root=UUID=6f255724-bf75-4ddf-b329-d78c630c080c ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 1474904K/1535544K available (7919K kernel code, 1174K rwdata, 3756K rodata, 1408K init, 1292K bss, 60640K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS:16640 nr_irqs:256 16
[    0.000000]  Offload RCU callbacks from all CPUs
[    0.000000]  Offload RCU callbacks from CPUs: 0.
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Detected 3092.974 MHz processor
[60528.038341] Calibrating delay loop (skipped) preset value.. 6185.94 BogoMIPS (lpj=12371896)
[60528.038344] pid_max: default: 32768 minimum: 301
[60528.038347] ACPI: Core revision 20141107
[60528.039156] ACPI: All ACPI Tables successfully acquired
[60528.039172] Security Framework initialized
[60528.039184] AppArmor: AppArmor initialized
[60528.039185] Yama: becoming mindful.
[60528.039384] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[60528.039706] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[60528.039888] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[60528.039891] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[60528.040023] Initializing cgroup subsys memory
[60528.040028] Initializing cgroup subsys devices
[60528.040030] Initializing cgroup subsys freezer
[60528.040031] Initializing cgroup subsys net_cls
[60528.040033] Initializing cgroup subsys blkio
[60528.040034] Initializing cgroup subsys perf_event
[60528.040036] Initializing cgroup subsys net_prio
[60528.040037] Initializing cgroup subsys hugetlb
[60528.040113] CPU: Physical Processor ID: 0
[60528.040128] mce: CPU supports 0 MCE banks
[60528.040149] process: using mwait in idle threads
[60528.040154] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[60528.040154] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[60528.065200] Freeing SMP alternatives memory: 32K (ffffffff81e87000 - ffffffff81e8f000)
[60528.075993] ftrace: allocating 30016 entries in 118 pages
[60528.145633] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[60528.145637] smpboot: CPU0: Intel(R) Xeon(R) CPU E31225 @ 3.10GHz (fam: 06, model: 2a, stepping: 07)
[60528.250901] Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only.
[60528.257945] KVM setup paravirtual spinlock
[60528.258556] x86: Booted up 1 node, 1 CPUs
[60528.258558] smpboot: Total of 1 processors activated (6185.94 BogoMIPS)
[60528.258844] NMI watchdog: disabled (cpu0): hardware events not enabled
[60528.258897] devtmpfs: initialized
[60528.261078] evm: security.selinux
[60528.261080] evm: security.SMACK64
[60528.261080] evm: security.SMACK64EXEC
[60528.261081] evm: security.SMACK64TRANSMUTE
[60528.261082] evm: security.SMACK64MMAP
[60528.261082] evm: security.ima
[60528.261083] evm: security.capability
[60528.261213] pinctrl core: initialized pinctrl subsystem
[60528.261417] RTC time: 15:18:46, date: 09/01/15
[60528.261540] NET: Registered protocol family 16
[60528.261663] cpuidle: using governor ladder
[60528.261665] cpuidle: using governor menu
[60528.261701] ACPI: bus type PCI registered
[60528.261702] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[60528.261804] PCI: Using configuration type 1 for base access
[60528.262843] ACPI: Added _OSI(Module Device)
[60528.262845] ACPI: Added _OSI(Processor Device)
[60528.262846] ACPI: Added _OSI(3.0 _SCP Extensions)
[60528.262847] ACPI: Added _OSI(Processor Aggregator Device)
[60528.263441] ACPI: Executed 1 blocks of module-level executable AML code
[60528.265140] ACPI: Interpreter enabled
[60528.265145] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
[60528.265148] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[60528.265150] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20141107/hwxface-580)
[60528.265152] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20141107/hwxface-580)
[60528.265156] ACPI: (supports S0 S5)
[60528.265157] ACPI: Using IOAPIC for interrupt routing
[60528.265276] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[60528.267137] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[60528.267141] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[60528.267144] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[60528.267216] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[60528.267425] PCI host bridge to bus 0000:00
[60528.267427] pci_bus 0000:00: root bus resource [bus 00-ff]
[60528.267429] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[60528.267430] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[60528.267431] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[60528.267432] pci_bus 0000:00: root bus resource [mem 0x5dc00000-0xffdfffff]
[60528.267473] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[60528.268013] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[60528.268750] pci 0000:00:01.1: [8086:7111] type 00 class 0x01018a
[60528.269224] pci 0000:00:01.1: reg 0x20: [io  0xd000-0xd00f]
[60528.269394] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[60528.269395] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[60528.269396] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[60528.269397] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[60528.269592] pci 0000:00:02.0: [80ee:beef] type 00 class 0x030000
[60528.270672] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff pref]
[60528.277781] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[60528.278836] pci 0000:00:03.0: reg 0x10: [mem 0xf0000000-0xf001ffff]
[60528.280399] pci 0000:00:03.0: reg 0x18: [io  0xd010-0xd017]
[60528.284609] pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
[60528.285830] pci 0000:00:04.0: reg 0x10: [io  0xd020-0xd03f]
[60528.287464] pci 0000:00:04.0: reg 0x14: [mem 0xf0400000-0xf07fffff]
[60528.289228] pci 0000:00:04.0: reg 0x18: [mem 0xf0800000-0xf0803fff pref]
[60528.294108] pci 0000:00:05.0: [8086:2415] type 00 class 0x040100
[60528.294220] pci 0000:00:05.0: reg 0x10: [io  0xd100-0xd1ff]
[60528.294307] pci 0000:00:05.0: reg 0x14: [io  0xd200-0xd23f]
[60528.294950] pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
[60528.295992] pci 0000:00:0c.0: [8086:1e31] type 00 class 0x0c0330
[60528.297343] pci 0000:00:0c.0: reg 0x10: [mem 0xf0810000-0xf081ffff]
[60528.302846] pci 0000:00:0d.0: [8086:2829] type 00 class 0x010601
[60528.303692] pci 0000:00:0d.0: reg 0x10: [io  0xd240-0xd247]
[60528.305135] pci 0000:00:0d.0: reg 0x18: [io  0xd250-0xd257]
[60528.307228] pci 0000:00:0d.0: reg 0x20: [io  0xd260-0xd26f]
[60528.307981] pci 0000:00:0d.0: reg 0x24: [mem 0xf0820000-0xf0821fff]
[60528.310054] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
[60528.310224] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
[60528.310349] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
[60528.310423] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
[60528.310539] ACPI: Enabled 2 GPEs in block 00 to 07
[60528.310645] vgaarb: setting as boot device: PCI:0000:00:02.0
[60528.310647] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[60528.310648] vgaarb: loaded
[60528.310649] vgaarb: bridge control possible 0000:00:02.0
[60528.310887] SCSI subsystem initialized
[60528.310932] libata version 3.00 loaded.
[60528.310951] ACPI: bus type USB registered
[60528.310964] usbcore: registered new interface driver usbfs
[60528.310970] usbcore: registered new interface driver hub
[60528.310980] usbcore: registered new device driver usb
[60528.311071] PCI: Using ACPI for IRQ routing
[60528.311073] PCI: pci_cache_line_size set to 64 bytes
[60528.311376] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[60528.311379] e820: reserve RAM buffer [mem 0x5dbf0000-0x5fffffff]
[60528.311468] NetLabel: Initializing
[60528.311469] NetLabel:  domain hash size = 128
[60528.311469] NetLabel:  protocols = UNLABELED CIPSOv4
[60528.311479] NetLabel:  unlabeled traffic allowed by default
[60528.311546] Switched to clocksource kvm-clock
[60528.316544] AppArmor: AppArmor Filesystem Enabled
[60528.316599] pnp: PnP ACPI init
[60528.316715] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[60528.316795] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 (active)
[60528.316830] pnp 00:02: Plug and Play ACPI device, IDs PNP0400 (active)
[60528.317331] pnp: PnP ACPI: found 3 devices
[60528.322955] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[60528.322959] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[60528.322961] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[60528.322962] pci_bus 0000:00: resource 7 [mem 0x5dc00000-0xffdfffff]
[60528.323006] NET: Registered protocol family 2
[60528.323196] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[60528.323231] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[60528.323281] TCP: Hash tables configured (established 16384 bind 16384)
[60528.323297] TCP: reno registered
[60528.323308] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[60528.323315] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[60528.323340] NET: Registered protocol family 1
[60528.323350] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[60528.323381] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[60528.323411] pci 0000:00:02.0: Video device with shadowed ROM
[60528.324337] PCI: CLS 64 bytes, default 64
[60528.324392] Trying to unpack rootfs image as initramfs...
[60528.703097] Freeing initrd memory: 19336K (ffff880035a2c000 - ffff880036d0e000)
[60528.703221] platform rtc_cmos: registered platform RTC device (no PNP device found)
[60528.703272] RAPL PMU detected, hw unit 2^-0 Joules, API unit is 2^-32 Joules, 3 fixed counters 10737418240 ms ovfl timer
[60528.703295] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x0
[60528.703354] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[60528.703374] Scanning for low memory corruption every 60 seconds
[60528.703584] futex hash table entries: 256 (order: 2, 16384 bytes)
[60528.703594] Initialise system trusted keyring
[60528.703612] audit: initializing netlink subsys (disabled)
[60528.703625] audit: type=2000 audit(1441181254.904:1): initialized
[60528.703887] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[60528.705068] zpool: loaded
[60528.705071] zbud: loaded
[60528.705192] VFS: Disk quotas dquot_6.5.2
[60528.705216] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[60528.705575] fuse init (API version 7.23)
[60528.705669] Key type big_key registered
[60528.705871] Key type asymmetric registered
[60528.705873] Asymmetric key parser 'x509' registered
[60528.705901] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[60528.705918] io scheduler noop registered
[60528.705920] io scheduler deadline registered (default)
[60528.705941] io scheduler cfq registered
[60528.705993] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[60528.706004] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[60528.706025] vesafb: mode is 640x480x32, linelength=2560, pages=0
[60528.706025] vesafb: scrolling: redraw
[60528.706027] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[60528.706032] mtrr: your processor doesn't support write-combining
[60528.706039] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90000400000, using 1216k, total 1216k
[60528.706092] Console: switching to colour frame buffer device 80x30
[60528.706099] fb0: VESA VGA frame buffer device
[60528.706222] ACPI: AC Adapter [AC] (on-line)
[60528.706264] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[60528.706267] ACPI: Power Button [PWRF]
[60528.706382] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[60528.706384] ACPI: Sleep Button [SLPF]
[60528.706550] GHES: HEST is not enabled!
[60528.706613] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[60528.707577] Linux agpgart interface v0.103
[60528.708504] brd: module loaded
[60528.708944] loop: module loaded
[60528.709130] ata_piix 0000:00:01.1: version 2.13
[60528.709516] scsi host0: ata_piix
[60528.709581] scsi host1: ata_piix
[60528.709606] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[60528.709607] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[60528.709656] libphy: Fixed MDIO Bus: probed
[60528.709658] tun: Universal TUN/TAP device driver, 1.6
[60528.709659] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[60528.709987] PPP generic driver version 2.4.2
[60528.710484] xhci_hcd 0000:00:0c.0: xHCI Host Controller
[60528.710489] xhci_hcd 0000:00:0c.0: new USB bus registered, assigned bus number 1
[60528.869096] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[60528.869099] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[60528.869100] usb usb1: Product: xHCI Host Controller
[60528.869102] usb usb1: Manufacturer: Linux 3.19.0-26-generic xhci-hcd
[60528.869103] usb usb1: SerialNumber: 0000:00:0c.0
[60528.869412] hub 1-0:1.0: USB hub found
[60528.869443] hub 1-0:1.0: 8 ports detected
[60528.869707] xhci_hcd 0000:00:0c.0: xHCI Host Controller
[60528.869710] xhci_hcd 0000:00:0c.0: new USB bus registered, assigned bus number 2
[60528.869884] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[60528.869886] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[60528.869887] usb usb2: Product: xHCI Host Controller
[60528.869888] usb usb2: Manufacturer: Linux 3.19.0-26-generic xhci-hcd
[60528.869889] usb usb2: SerialNumber: 0000:00:0c.0
[60528.869955] hub 2-0:1.0: USB hub found
[60528.869978] hub 2-0:1.0: 6 ports detected
[60528.870146] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[60528.870150] ehci-pci: EHCI PCI platform driver
[60528.870159] ehci-platform: EHCI generic platform driver
[60528.870168] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[60528.870171] ohci-pci: OHCI PCI platform driver
[60528.870177] ohci-platform: OHCI generic platform driver
[60528.870182] uhci_hcd: USB Universal Host Controller Interface driver
[60528.870219] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[60528.870706] serio: i8042 KBD port at 0x60,0x64 irq 1
[60528.870710] serio: i8042 AUX port at 0x60,0x64 irq 12
[60528.870787] mousedev: PS/2 mouse device common for all mice
[60528.871431] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[60528.871766] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[60528.871817] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[60528.871868] i2c /dev entries driver
[60528.871950] device-mapper: uevent: version 1.0.3
[60528.872011] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
[60528.872026] ledtrig-cpu: registered to indicate activity on CPUs
[60528.872096] PCCT header not found.
[60528.872097] ACPI PCC probe failed.
[60528.872174] TCP: cubic registered
[60528.872253] NET: Registered protocol family 10
[60528.872576] NET: Registered protocol family 17
[60528.872587] Key type dns_resolver registered
[60528.873081] Loading compiled-in X.509 certificates
[60528.873974] Loaded X.509 cert 'Magrathea: Glacier signing key: ed8339fd1a2f8dc0efdc5df7129dfb170a6f6dab'
[60528.873992] registered taskstats version 1
[60528.875409] Key type trusted registered
[60528.877902] Key type encrypted registered
[60528.877908] AppArmor: AppArmor sha1 policy hashing enabled
[60528.877912] ima: No TPM chip found, activating TPM-bypass!
[60528.877926] evm: HMAC attrs: 0x1
[60528.878236]   Magic number: 15:952:334
[60528.878258] tty tty55: hash matches
[60528.878306] rtc_cmos rtc_cmos: setting system clock to 2015-09-01 15:18:46 UTC (1441120726)
[60528.878412] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[60528.878413] EDD information not available.
[60528.878449] PM: Hibernation image not present or could not be loaded.
[60529.024589] ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
[60529.025451] ata2.00: configured for UDMA/33
[60529.026554] scsi 1:0:0:0: CD-ROM            VBOX     CD-ROM           1.0  PQ: 0 ANSI: 5
[60529.027721] sr 1:0:0:0: [sr0] scsi3-mmc drive: 32x/32x xa/form2 tray
[60529.027726] cdrom: Uniform CD-ROM driver Revision: 3.20
[60529.027838] sr 1:0:0:0: Attached scsi CD-ROM sr0
[60529.027912] sr 1:0:0:0: Attached scsi generic sg0 type 5
[60529.028291] Freeing unused kernel memory: 1408K (ffffffff81d27000 - ffffffff81e87000)
[60529.028294] Write protecting the kernel read-only data: 12288k
[60529.028607] Freeing unused kernel memory: 260K (ffff8800017bf000 - ffff880001800000)
[60529.028720] Freeing unused kernel memory: 340K (ffff880001bab000 - ffff880001c00000)
[60529.040024] systemd-udevd[100]: starting version 204
[60529.088501] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[60529.088503] e1000: Copyright (c) 1999-2006 Intel Corporation.
[60529.584486] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[60529.633777] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:66:a6:56
[60529.633782] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[60529.633802] ahci 0000:00:0d.0: version 3.0
[60529.634301] ahci 0000:00:0d.0: SSS flag set, parallel bus scan disabled
[60529.634476] ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[60529.634479] ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc 
[60529.635171] scsi host2: ahci
[60529.635219] ata3: SATA max UDMA/133 abar m8192@0xf0820000 port 0xf0820100 irq 21
[60529.639634] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[60529.699560] tsc: Refined TSC clocksource calibration: 3091.995 MHz
[60529.769516] usb 1-1: New USB device found, idVendor=80ee, idProduct=0021
[60529.769519] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[60529.769521] usb 1-1: Product: USB Tablet
[60529.769522] usb 1-1: Manufacturer: VirtualBox
[60529.769686] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[60530.032407] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[60530.032593] ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
[60530.032595] ata3.00: 31567040 sectors, multi 128: LBA48 NCQ (depth 31/32)
[60530.032841] ata3.00: configured for UDMA/133
[60530.033106] scsi 2:0:0:0: Direct-Access     ATA      VBOX HARDDISK    1.0  PQ: 0 ANSI: 5
[60530.033771] sd 2:0:0:0: [sda] 31567040 512-byte logical blocks: (16.1 GB/15.0 GiB)
[60530.033880] sd 2:0:0:0: [sda] Write Protect is off
[60530.033881] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[60530.033893] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[60530.034943] sd 2:0:0:0: Attached scsi generic sg1 type 0
[60530.035658] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[60530.204811]  sda: sda1 sda2 < sda5 >
[60530.205778] sd 2:0:0:0: [sda] Attached SCSI disk
[60530.327824] usb 1-2: New USB device found, idVendor=0403, idProduct=6010
[60530.327827] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[60530.327829] usb 1-2: Product: Pipistrello LX45
[60530.327830] usb 1-2: Manufacturer: Saanlima
[60530.327831] usb 1-2: SerialNumber: 400100527227
[60530.464369] hidraw: raw HID events driver (C) Jiri Kosina
[60530.471651] usbcore: registered new interface driver usbhid
[60530.471653] usbhid: USB HID core driver
[60530.473439] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[60530.473790] input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:0c.0/usb1/1-1/1-1:1.0/0003:80EE:0021.0001/input/input5
[60530.473963] hid-generic 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:0c.0-1/input0
[60532.120503] floppy0: no floppy controllers found
[60532.120617] work still pending
[60532.598940] random: init urandom read with 75 bits of entropy available
[60532.878367] init: plymouth-upstart-bridge main process (153) terminated with status 1
[60532.878458] init: plymouth-upstart-bridge main process ended, respawning
[60532.885032] init: plymouth-upstart-bridge main process (166) terminated with status 1
[60532.885040] init: plymouth-upstart-bridge main process ended, respawning
[60532.894178] init: plymouth-upstart-bridge main process (168) terminated with status 1
[60532.894188] init: plymouth-upstart-bridge main process ended, respawning
[60532.901126] init: plymouth-upstart-bridge main process (171) terminated with status 1
[60532.901135] init: plymouth-upstart-bridge main process ended, respawning
[60532.908119] init: plymouth-upstart-bridge main process (173) terminated with status 1
[60532.908127] init: plymouth-upstart-bridge main process ended, respawning
[60532.917645] init: plymouth-upstart-bridge main process (175) terminated with status 1
[60532.917653] init: plymouth-upstart-bridge main process ended, respawning
[60533.643980] random: nonblocking pool is initialized
[60537.991664] Adding 2095100k swap on /dev/sda5.  Priority:-1 extents:1 across:2095100k FS
[60538.147861] systemd-udevd[276]: starting version 204
[60538.312094] lp: driver loaded but no devices found
[60538.343426] vboxguest: module verification failed: signature and/or  required key missing - tainting kernel
[60538.345333] ppdev: user-space parallel port driver
[60538.347514] parport_pc 00:02: reported by Plug and Play ACPI
[60538.367237] piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
[60538.376673] VbgdCommonInitDevExt: Setting up heartbeat to trigger every 2000 milliseconds
[60538.389111] input: Unspecified device as /devices/pci0000:00/0000:00:04.0/input/input6
[60538.389223] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[60538.389294] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input7
[60538.392070] vboxguest: misc device minor 56, IRQ 20, I/O port d020, MMIO at 00000000f0400000 (size 0x400000)
[60538.392110] vboxguest: Successfully loaded version 5.0.2 (interface 0x00010004)
[60538.446844] [drm] Initialized drm 1.1.0 20060810
[60538.451727] audit: type=1400 audit(1441120736.067:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=332 comm="apparmor_parser"
[60538.451732] audit: type=1400 audit(1441120736.067:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=332 comm="apparmor_parser"
[60538.451736] audit: type=1400 audit(1441120736.067:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=332 comm="apparmor_parser"
[60538.454539] audit: type=1400 audit(1441120736.071:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=332 comm="apparmor_parser"
[60538.454603] audit: type=1400 audit(1441120736.071:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=332 comm="apparmor_parser"
[60538.454775] audit: type=1400 audit(1441120736.071:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=332 comm="apparmor_parser"
[60538.496351] [drm] Initialized vboxvideo 1.0.0 20090303 for 0000:00:02.0 on minor 0
[60538.635490] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[60538.995722] usbcore: registered new interface driver usbserial
[60538.995836] usbcore: registered new interface driver usbserial_generic
[60538.995857] usbserial: USB Serial support registered for generic
[60539.016852] AVX version of gcm_enc/dec engaged.
[60539.016854] AES CTR mode by8 optimization enabled
[60539.048016] usbcore: registered new interface driver ftdi_sio
[60539.048039] usbserial: USB Serial support registered for FTDI USB Serial Device
[60539.048066] ftdi_sio 1-2:1.0: FTDI USB Serial Device converter detected
[60539.048100] usb 1-2: Detected FT2232H
[60539.055841] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB0
[60539.055871] ftdi_sio 1-2:1.1: FTDI USB Serial Device converter detected
[60539.056087] usb 1-2: Detected FT2232H
[60539.058315] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB1
[60539.332714] intel_rapl: no valid rapl domains found in package 0
[60539.386935] init: failsafe main process (552) killed by TERM signal
[60539.523282] snd_intel8x0 0000:00:05.0: disable (unknown or VT-d) VM optimization
[60539.669509] audit: type=1400 audit(1441120737.287:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=666 comm="apparmor_parser"
[60539.669515] audit: type=1400 audit(1441120737.287:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=666 comm="apparmor_parser"
[60539.669881] audit: type=1400 audit(1441120737.287:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=666 comm="apparmor_parser"
[60539.680355] Bluetooth: Core ver 2.20
[60539.680385] NET: Registered protocol family 31
[60539.680387] Bluetooth: HCI device and connection manager initialized
[60539.680560] Bluetooth: HCI socket layer initialized
[60539.680563] Bluetooth: L2CAP socket layer initialized
[60539.680570] Bluetooth: SCO socket layer initialized
[60539.697874] Bluetooth: RFCOMM TTY layer initialized
[60539.697880] Bluetooth: RFCOMM socket layer initialized
[60539.697883] Bluetooth: RFCOMM ver 1.11
[60539.743178] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[60539.743183] Bluetooth: BNEP filters: protocol multicast
[60539.743190] Bluetooth: BNEP socket layer initialized
[60539.857434] audit: type=1400 audit(1441120737.475:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=697 comm="apparmor_parser"
[60539.874785] init: cups main process (670) killed by HUP signal
[60539.874797] init: cups main process ended, respawning
[60539.900385] snd_intel8x0 0000:00:05.0: white list rate for 1028:0177 is 48000
[60540.657146] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[60541.431907] floppy0: no floppy controllers found
[60541.431950] work still pending
[60542.781765] vboxsf: Successfully loaded version 5.0.2 (interface 0x00010004)
[60543.048413] VBoxService 5.0.2 r102096 (verbosity: 0) linux.amd64 (Aug 13 2015 18:27:51) release log
[60543.048413] 00:00:00.000233 main     Log opened 2015-09-01T15:19:00.669885000Z
[60543.048714] 00:00:00.000643 main     OS Product: Linux
[60543.048822] 00:00:00.000757 main     OS Release: 3.19.0-26-generic
[60543.048926] 00:00:00.000783 main     OS Version: #28~14.04.1-Ubuntu SMP Wed Aug 12 14:09:17 UTC 2015
[60543.049284] 00:00:00.001137 main     OS Service Pack: #28~14.04.1-Ubuntu SMP Wed Aug 12 14:09:17 UTC 2015
[60543.049325] 00:00:00.001246 main     Executable: /opt/VBoxGuestAdditions-5.0.2/sbin/VBoxService
[60543.049325] 00:00:00.001247 main     Process ID: 1161
[60543.049325] 00:00:00.001248 main     Package type: LINUX_64BITS_GENERIC
[60543.054352] 00:00:00.006179 main     5.0.2 r102096 started. Verbose level = 0
[60543.086495] 00:00:00.038318 automount VBoxServiceAutoMountWorker: Shared folder "git" was mounted to "/media/sf_git"
[60543.090362] 00:00:00.042197 automount VBoxServiceAutoMountWorker: Shared folder "virtualBoxShared" was mounted to "/media/sf_virtualBoxShared"
[60544.788786] init: plymouth-upstart-bridge main process ended, respawning
[60544.818546] init: plymouth-upstart-bridge main process ended, respawning
[60569.823069] audit_printk_skb: 105 callbacks suppressed
[60569.823072] audit: type=1400 audit(1441120767.456:47): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2177 comm="apparmor_parser"
[60569.823078] audit: type=1400 audit(1441120767.456:48): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2177 comm="apparmor_parser"
[60569.823817] audit: type=1400 audit(1441120767.456:49): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2177 comm="apparmor_parser"
[60702.145425] usb 1-2: USB disconnect, device number 3
[60702.145533] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[60702.145544] ftdi_sio 1-2:1.0: device disconnected
[60702.149074] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
[60702.149087] ftdi_sio 1-2:1.1: device disconnected
[60733.653000] usb 1-2: new high-speed USB device number 4 using xhci_hcd
[60733.947547] usb 1-2: New USB device found, idVendor=0403, idProduct=6010
[60733.947551] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[60733.947552] usb 1-2: Product: Pipistrello LX45
[60733.947554] usb 1-2: Manufacturer: Saanlima
[60733.947555] usb 1-2: SerialNumber: 400100527227
[60733.955805] ftdi_sio 1-2:1.0: FTDI USB Serial Device converter detected
[60733.955826] usb 1-2: Detected FT2232H
[60733.957812] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB0
[60733.960159] ftdi_sio 1-2:1.1: FTDI USB Serial Device converter detected
[60733.960265] usb 1-2: Detected FT2232H
[60733.963175] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB1
fallen commented 9 years ago

Can you run: $ lsusb -t | grep ftdi_sio It should print something like: |__ Port 1: Dev 13, If 0, Class=Vendor Specific Class, Driver=ftdi_sio, 480M But with different "Port" and "Dev" value. Can you then do: $ ls -lh /dev/bus/usb/001 if Port is 1

fallen commented 9 years ago

It's difficult to find the real issue without your help.

sbourdeauducq commented 9 years ago

Do you have xc3sprog installed? Also, the script should display a better error message when xc3sprog is not found.

ghost commented 9 years ago

I'm away from Boulder. I'll be back on Thursday and will check this then. Joe On Sun, Sep 6, 2015 at 8:55 PM Sébastien Bourdeauducq < notifications@github.com> wrote:

Do you have xc3sprog installed? Also, the script should display a better error message when xc3sprog is not found.

— Reply to this email directly or view it on GitHub https://github.com/m-labs/artiq/issues/124#issuecomment-138148058.

sbourdeauducq commented 8 years ago

Just tested it OK with the latest conda package (1626).