Error trying to run Blinky registration-helper.py

ajlennon commented 3 years ago

Hi,

I am trying to work through the Blinky example. I have an M5Stack fire with PSRAM but no internal secure element.

I have an external secure element which should be the same (ATECC608) connected via I2C.

This appears to be detected as I get an initialisation error when I remove it.

Hoever I am getting this error when I run the AWS registration-helper. Any thoughts?

Generating ECDSA 256-bit prime field key...
Generating self-signed x.509 certificate...
Successfully created x.509 certificate with expiration in 365 days...
Connecting....
Changing baud rate to 921600
Changed.
RAM boot...
Downloading 31364 bytes at 3ffb0000... done!
Downloading 456 bytes at 3ffb8f28... done!
Downloading 1028 bytes at 40080000... done!
Downloading 107384 bytes at 40080404... done!
Downloading 4 bytes at 4009a77c... done!
All segments done, executing at 40081bf0
Wait for init
- CLI Initialised
>>

>>

Serial Number:
01238688AE2091F4EE
Generating Manifest
>>

Crypto Authentication Root CA 002
-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----

TNG Root Public Key:
-----BEGIN PUBLIC KEY-----
MFkwEwYHKoZIzj0CAQYIKoZIzj0DAQcDQgAEvVTmbeOHVIQAa1OuFYDVCqBp54rf
VXjYXOLVTdW4MClr/91ub3JW+9me8aEWsR0zrUkQOqGFhznc+uQ34Z1jTg==
-----END PUBLIC KEY-----

get-tngtls-signer-certfailed to execute
Failed to obtain tngtls_signer cert , returned 04

rashedtalukder commented 3 years ago

Is it an ATECC608 Trust&GO, or TrustFLEX, or TrustCUSTOM? The script only supports a Trust&GO which comes pre-provisioned with keys.

rashedtalukder commented 2 years ago

Closed issue due to no response

m5stack / Core2-for-AWS-IoT-Kit

Error trying to run Blinky registration-helper.py #71