Open linxcow opened 7 months ago
After a lot of testing I found the the screenbreath() required values have changed nothing is mentioned in the online help Most of the online help is not uptodate and incomplete. So my code was working but too dim to see
Setting tftSprite.setCursor(0, 0, x);
font 3 does not display anything also undocumented.
https://github.com/m5stack/M5StickC-Plus/assets/44396641/35c4312b-6424-4bb9-92c3-157e2920ecf8
https://github.com/m5stack/M5StickC-Plus/assets/44396641/75621f22-fd4c-4baf-9e68-6c7e68bfd5cb
Are you using the latest library? I don't reproduce your problem at all, and switching fonts works fine!
@linxcow
Describe the bug
Using following code after installing m5stickcplus 0.1.0 i get always black display. I also note in my other projects that using setCursor(0, 0, x) to change font or size values between 1 and 7 some dont show any display at all , why is that?
To reproduce
use code above in arduino version above
Expected behavior
Arduino ide 1.8.19
Screenshots
No response
Environment
Additional context
No response
Issue checklist