Open bksathesh opened 1 year ago
Hi All,
I've made some progress. The first mistake was to put the camera in MTP mode. I changed it to USB Mass Storage and I am able to get to service mode. Then I am not sure what I am supposed to do.
C:\Users\Admin\Downloads>pmca-console-v0.18-win.exe serviceshell Using drivers Windows-MSC, Windows-MTP, Windows-vendor-specific, libusb-MSC, libusb-MTP, libusb-vendor-specific Looking for Sony devices
Querying mass storage device Sony DSC is a camera in mass storage mode
Switching to service mode
Waiting for camera to switch...
Found a camera in service mode
Authenticating
Welcome to USB service shell.
Type help
for the list of supported commands.
Type exit
to quit.
Where to from here? Any help, much appreciated. Thank you
Hi All,
I've made some progress. The first mistake was to put the camera in MTP mode. I changed it to USB Mass Storage and I am able to get to service mode. Then I am not sure what I am supposed to do.
C:\Users\Admin\Downloads>pmca-console-v0.18-win.exe serviceshell Using drivers Windows-MSC, Windows-MTP, Windows-vendor-specific, libusb-MSC, libusb-MTP, libusb-vendor-specific Looking for Sony devices
Querying mass storage device Sony DSC is a camera in mass storage mode
Switching to service mode
Waiting for camera to switch... Found a camera in service mode Authenticating Welcome to USB service shell. Type
help
for the list of supported commands. Typeexit
to quit.Where to from here? Any help, much appreciated. Thank you Привет. Спасибо тебе за помощь надо было с MTP переключить в USB Mass Store и желательно взять кабель с телефона который 100% передает данные, а дальше по инструкции которое на видео: https://www.youtube.com/watch?v=82A_SxMjtc0 и обязательно файлы которые я прикреплю. Downloads.zip
@bksathesh
I had success on my Sony A7 III running the latest dev version and using the GUI.
Follow the linux instructions but on windows. Clone the repo, install all python requirements in requirements.txt
and then run python pmca-gui.py
. There is now an option to install using service mode in the tweaks menu.
Hi,
I followed some instructions and read the forum, but I am not successful in installing the tweak on my camera. Any suggestions?
This is what I get on the console:
C:\Users\Admin\Downloads>pmca-console-v0.18-win.exe serviceshell Using drivers Windows-MSC, Windows-MTP, Windows-vendor-specific, libusb-MSC, libusb-MTP, libusb-vendor-specific Looking for Sony devices
Querying MTP device Sony Corporation ILCE-7M3 is a camera in MTP mode
Error: Cannot use camera in this mode.
C:\Users\Admin\Downloads>
I've already run Zadig to change the drivers. I can't work out what am I doing wrong. Any suggestions?
Thank you.
Best wishes, Sathesh