search

maasijam / eurorack

Eurorack DIY stuff
41 stars 5 forks source link

OSGO Nano header sockets, etc #4

Closed tripslip38 closed 9 months ago

tripslip38 commented 9 months ago

Trying to piece together a component order and looking for stuff that might not be on the BOM.

  1. Studying your side profile photos of the Arduino Nano stacked onto the PCB it looks like sockets that are partially engaged? Are you able to elaborate a little more on that?
  2. The 2x8 at the bottom of the board...I guess that's the larger ribbon connector to support both 12V eurorack power and 5V for the Nano? Do you know what is the standard component for that? Is this the correct pin pitch?
  3. Threaded standoffs: Do you have a spec? Thank you very much!
maasijam commented 9 months ago

Hi, I've updated the BOM. Hopefully that makes it a little more understandable,

  1. The Arduino is plugged into a 2*14 IC socket (pin 15/16 of the Arduino are not needed)
  2. Yes, the 5V comes from the eurorack power. The header in your link is correct.
  3. See the updated BOM

Best regards

tripslip38 commented 9 months ago

Hi, I've updated the BOM. Hopefully that makes it a little more understandable,

  1. The Arduino is plugged into a 2*14 IC socket (pin 15/16 of the Arduino are not needed)
  2. Yes, the 5V comes from the eurorack power. The header in your link is correct.
  3. See the updated BOM

Best regards

Thank you, Maasijam!