search

maccoylton / esp-homekit-wired-thermostat

Homekit Firmware for Wired Thermostat BHT-002
Apache License 2.0
8 stars 1 forks source link

Help with firmware #6

Closed megaj07 closed 1 year ago

megaj07 commented 1 year ago

Hello. I'm trying to flash the thermostat. I downloaded the bootloader.bin file from the maccoylton/esp-homekit-motion-sensor theme, the LCM-XXXX access point appeared, connected, did everything according to the wiki instructions: -select your WiFi by clicking on it -enter your WiFi password -enter the GitHub directory -maccoylton/esp-homekit-wired-thermostat -enter filename -main.bin. -LED GPIO should be set to 13 -click the join button After that, the access point disappears and that's it, then nothing happens. The device does not appear in Homekit. Maybe some soap? Thank you in advance!

maccoylton commented 1 year ago

Those set get the firmware loaded and the device connected to your wifi, after that you need to go into the Home app and go through the process to add a new accessory.

megaj07 commented 1 year ago

In the Home application, as usual, I try to add a new device with the code 1111-1111, but the new device does not appear

maccoylton commented 1 year ago

What exactly happened. When you try to add a new device does it show up and the you get to enter the pin?

megaj07 commented 1 year ago

Hello. Thanks for the answer. Device not showing up in Homekit for pairing

megaj07 commented 1 year ago

For the firmware, the esp module was soldered. Then I flashed bootloader.bin. Then I connected it to the access point both on the dismantled module and on the assembled thermostat. pairing does not occur